تفاصيل الأصول
هل ترغب في حجز الكتاب؟
Optimization of sequencing batch reactor for wastewater treatment using chemically enhanced primary treatment as a pre-treatment
لقد وضعنا الحجز لك!
بالمناسبة ، لماذا لا تستكشف الفعاليات التي يمكنك حضورها عند زيارتك للمكتبة لإستلام كتبك
هل أنت متأكد أنك تريد إزالة الكتاب من الرف؟
Optimization of sequencing batch reactor for wastewater treatment using chemically enhanced primary treatment as a pre-treatment
هل تريد طلب الكتاب؟
Optimization of sequencing batch reactor for wastewater treatment using chemically enhanced primary treatment as a pre-treatment
يرجى العلم أن الكتاب الذي طلبته لا يمكن استعارته. إذا كنت ترغب في إستعارة هذا الكتاب ، يمكنك حجز نسخة أخرى
Journal Article
Optimization of sequencing batch reactor for wastewater treatment using chemically enhanced primary treatment as a pre-treatment
2018
نظرة عامة
The sequencing batch reactor (SBR) is a wastewater treatment option feasible for low flows. The objective of this research was to optimize SBR by varying its operational parameters, viz. (i) settling time and (ii) reaction time. The study was conducted in two phases. In Phase 1, raw wastewater was fed into the SBR after conventional settling, while in Phase 2 raw wastewater was fed into the SBR after coagulation-flocculation-sedimentation. A bench-scale model was set up and domestic wastewater was used for this study. Performance of the treatment system was evaluated through 5-day biochemical oxygen demand (BOD), chemical oxygen demand (COD) and total suspended solids (TSS). The results demonstrated that reaction time was reduced to 4 h in Phase 2 compared to 10 h in Phase 1. The BOD, COD and TSS removal efficiencies observed in Phase 1 were 80%, 80% and 73%, respectively, and for Phase 2 the removal efficiencies were 74%, 75% and 80% respectively. National Environmental Quality Standards (NEQS) were met in both cases and the treatment cost per cubic metre of wastewater for Phase 2 was 2.5 times lower compared to Phase 1.
