Explore the vast range of titles available.

Modern humanity wades daily through various radiations, resulting in frequent exposure and causing potentially important biological effects. Among them, the brain is the organ most sensitive to electromagnetic radiation (EMR) exposure. Despite numerous correlated studies, critical unknowns surround the different parameters used, including operational frequency, power density (i.e., energy dose), and irradiation time that could permit reproducibility and comparability between analyses. Furthermore, the interactions of EMR with biological systems and its precise mechanisms remain poorly characterized. In this review, recent approaches examining the effects of microwave radiations on the brain, specifically learning and memory capabilities, as well as the mechanisms of brain dysfunction with exposure as reported in the literature, are analyzed and interpreted to provide prospective views for future research directed at this important and novel medical technology for developing preventive and therapeutic strategies on brain degeneration caused by microwave radiation. Additionally, the interactions of microwaves with biological systems and possible mechanisms are presented in this review. Treatment with natural products and safe techniques to reduce harm to organs have become essential components of daily life, and some promising techniques to treat cancers and their radioprotective effects are summarized as well. This review can serve as a platform for researchers to understand the mechanism and interactions of microwave radiation with biological systems, the present scenario, and prospects for future studies on the effect of microwaves on the brain.

The aim of this work was to investigate selected biological and toxicity properties of cured epoxy resin-based compounds based on a bisphenol A epoxy resin, cold-cured by a polyamide and containing two types of metal powders (aluminum and copper). This study involved cytotoxicity analysis, pH measurements, absorbance measurements and sterilization. The cytotoxicity analysis was conducted to determine the harmful degree of the cured epoxy resin. Aimed at identifying toxic agents in cured compounds, the cytotoxicity analysis involved absorbance measurements in an entire wavelength range. Cytotoxicity and absorbance results demonstrated that the extracts of all the tested resin samples had no cytotoxic effects on the cells of living organisms. The absorbance values obtained over the entire wavelength range did not point to the formation of aggregations, which proved that no toxic agents harmful to living organisms were extracted from the resin samples. Based on the results obtained, it can be concluded that all tested compounds, based on epoxy resins, which are also used as adhesives in various applications, are essentially safe materials when using such formulations in a cured state.

Recently, the green synthesis of metal nanoparticles has attracted wide attention due to its feasibility and very low environmental impact. This approach was applied in this study to synthesise nanoscale gold (Au), platinum (Pt), palladium (Pd), silver (Ag) and copper oxide (CuO) materials in simple aqueous media using the natural polymer gum karaya as a reducing and stabilising agent. The nanoparticles’ (NPs) zeta-potential, stability and size were characterised by Zetasizer Nano, UV–Vis spectroscopy and by electron microscopy. Moreover, the biological effect of the NPs (concentration range 1.0–20.0 mg/L) on a unicellular green alga ( Chlamydomonas reinhardtii ) was investigated by assessing algal growth, membrane integrity, oxidative stress, chlorophyll ( Chl ) fluorescence and photosystem II photosynthetic efficiency. The resulting NPs had a mean size of 42 (Au), 12 (Pt), 1.5 (Pd), 5 (Ag) and 180 (CuO) nm and showed high stability over 6 months. At concentrations of 5 mg/L, Au and Pt NPs only slightly reduced algal growth, while Pd, Ag and CuO NPs completely inhibited growth. Ag, Pd and CuO NPs showed strong biocidal properties and can be used for algae prevention in swimming pools (CuO) or in other antimicrobial applications (Pd, Ag), whereas Au and Pt lack these properties and can be ranked as harmless to green alga.

Highlights Strategies for crossing the blood–brain barrier and the nano-biological effects of nanomaterials used for anti-Parkinsonian therapy are summarized. Patents related to nanotechnology-based anti-Parkinsonian therapy are reviewed, and the status of progress in this field are discussed. Current challenges in nanotechnology-based Parkinson’s disease treatment are discussed, with insights into the future trends in this field. Parkinson’s disease (PD), a neurodegenerative disease that shows a high incidence in older individuals, is becoming increasingly prevalent. Unfortunately, there is no clinical cure for PD, and novel anti-PD drugs are therefore urgently required. However, the selective permeability of the blood–brain barrier (BBB) poses a huge challenge in the development of such drugs. Fortunately, through strategies based on the physiological characteristics of the BBB and other modifications, including enhancement of BBB permeability, nanotechnology can offer a solution to this problem and facilitate drug delivery across the BBB. Although nanomaterials are often used as carriers for PD treatment, their biological activity is ignored. Several studies in recent years have shown that nanomaterials can improve PD symptoms via their own nano-bio effects. In this review, we first summarize the physiological features of the BBB and then discuss the design of appropriate brain-targeted delivery nanoplatforms for PD treatment. Subsequently, we highlight the emerging strategies for crossing the BBB and the development of novel nanomaterials with anti-PD nano-biological effects. Finally, we discuss the current challenges in nanomaterial-based PD treatment and the future trends in this field. Our review emphasizes the clinical value of nanotechnology in PD treatment based on recent patents and could guide researchers working in this area in the future.

This paper is a review of the recent studies on Maillard reaction products, the formation mechanism for these compounds and melanoidin structure, the undesirable consequences in food especially in fruit juice processing, the desirable effects and the biological properties related to the beneficial health. Melanoidins are compounds generated in the late stages of the Maillard reaction from reducing sugars and proteins or amino acids during food processing and preservation. Recently, the effects of melanoidins on human health and the chemical characterization of the beneficial components have gained a lot of attention, and their implications on several levels, sensory, nutritional, toxicological and technological were investigated. Food melanoidins have been reported to be anionic, coloured compounds, and some of their key chromophores have been elucidated. The antioxidant activity and other biological effects of melanoidins from real foods and model systems have been widely studied. Despite this, very few different melanoidin structures have actually been described, and specific health effects have yet to be linked with chemically distinct melanoidins. The variety of Maillard reaction products formed during the reaction, in conjunction with the difficulty in purifying and identifying them, makes a thorough analysis of melanoidins challenging.

One of the most industrially affected rivers in Taiwan, the Houjing River, was studied in this research. The water and sediment samples were collected at five locations to measure the concentration of eight metals (As, Cd, Cr, Cu, Hg, Pb, Ni, and Zn). In order to assess the heavy metal contamination and its adverse biological effect, the heavy metal pollution index (HPI), the degree of contamination index (DC), the contamination factor (CF), the index of geo-accumulation ( I geo ), and hazard quotients (HQs) were employed. The results showed that the Houjing River’s water and sediment were contaminated with heavy metals. The annually averaged values of HPI (128.3) and DC (21.3) indicate that the water is unsafe for potable use and the sediment contamination level is at considerable degree of contamination. CF and I geo calculation show that Zn, Cu, and Cd are the three main metals contributing to heavy metal contamination in sediment. Evaluation of adverse biological effects suggests that Zn, Cu, and Ni are the major metals that cause adverse effects on organisms. This study provides an overview of the synergistic heavy metal contamination degree of the Houjing River and its adverse biological effects, which should be a reliable reference for future contamination control and management plans.

Magnetic nanoparticles (MNPs) are becoming important DNA nanocarriers for genetic engineering of industrial fungi. However, the biological effect of MNPs on industrial fungi remains unknown. In this study, we prepared three kinds of magnetic nanoparticles with different sizes (i.e., 10 nm, 20 nm, and 200 nm) to investigate their impact on the growth and sporulation of the important industrial fungus Aspergillus niger. Transmission electron microscopy, X-ray diffraction analysis and Zeta potential analysis revealed that the three kinds of MNPs, including MNP10, MNP20 and MNP200, had uniform size distribution, regular Fe3O4 X-ray diffraction (XRD) patterns and similar Zeta potentials. Interestingly, although the three kinds of MNPs did not obviously inhibit growth of the fungus, the MNP20 at 500 mg/L strongly attenuated sporulation, leading to a remarkable decrease in spore numbers on culturing plates. Further investigation showed that MNP20 at the high concentration led to drastic chitin accumulation in the cell wall, indicating cell wall disruption of the MNP20-treated fungal cells. Moreover, the MNPs did not cause unusual iron dissolution and reactive oxygen species (ROS) accumulation, and the addition of ferrous ion, ferric ion or the reactive oxygen species scavenger N-acetyl-L-cysteine (NAC) had no impact on the sporulation of the fungus, suggesting that both iron dissolution and ROS accumulation did not contribute to attenuated sporulation by MNP20. This study revealed the size-dependent effect of MNPs on fungal sporulation, which was associated with MNP-induced cell wall disruption.

Interspecific facilitation is a widely recognized process structuring natural communities. Benthic invertebrates are known to facilitate other invertebrates but how the former affect macroalgae has been rarely investigated. In the present study we explore some of the mechanisms underpinning the facilitation of the kelp Undaria pinnatifida by the solitary ascidian Styela clava , two species introduced worldwide. First, we evaluated the relationship between habitat complexity and the recruitment of U. pinnatifida in natural assemblages using the height and density of S. clava as proxies of habitat complexity. Second, we experimentally assessed the effect of habitat complexity using two sizes of mimics of S. clava arranged at two density levels in a crossed-factor design. Finally, we tested whether the biologic effect of S. clava was more important than its physical effect, by comparing U. pinnatifida’s recruitment on live S. clava and on the mimics. We observed a positive effect of height on U. pinnatifida’s recruitment in natural assemblages as well as through the experimental approach using the mimics. In addition, an effect of density and the interaction between density and height was observed in natural assemblages exclusively. We also found a strong positive effect due to biological features, as U. pinnatifida recruited more than ten times more on live S. clava than on the mimics. Our results indicate that a biologic non-trophic effect plays a more important role in this facilitation process than the structure alone.

Heat shock procedure is crucial for gynogenetic manipulation leading to diploidization of the maternal genomes; however, the underlying molecular mechanism especially the transcriptomic changes during this procedure has still not been unveiled yet. Here, the artificial gynogenesis of zebrafish ( Danio rerio ) using inactivated sperm from rare minnow ( Gobiocypris rarus ) was conducted. We found that artificial gynogenetic manipulation, including pseudo-fertilization and heat shock, decreased hatching rates, whereas heat shock treatment alone had medium hatching rates. The first cleavage changed the expression of genes associated with RNA transcription and protein synthesis. A co-expression network regulated by hub genes GIT1 , Sepsecs , and FLNB was significantly correlated with heat shock procedure. The cyclin family and cyclin-dependent kinase-related genes were lowly expressed in embryos from gynogenetic zebrafish, and genes involved in controlling the cell cycle and genomic stability were significantly altered by the gynogenetic treatment. Our results show the effects of artificial gynogenesis on embryos and describe changes in gene expression that suggest drastic changes take place in cell division by heat shock procedure. These findings will contribute to an understanding of the molecular basis for germplasm improving, including the purifying effect and allogynogenetic biological effect by gynogenesis.

In natural water bodies, numerous cyanobacteria have the potential to intracellularly synthesize cyanotoxins, among which microcystin (MC) is the ubiquitous toxin that has been well known to be carcinogenic for hepatocytes. MC synthesis is a complex process, which involves about 10 non-ribosomal proteins encoded by the mcy gene cluster. In the natural environments containing MC-producing cyanobacteria, a variety of external factors can affect the generation of MC by mediating the expression of synthesizing genes. These factors can be generally divided into biotic factors (e.g., daphnia, virioplankton, MC-degrading bacteria, algicidal bacteria) and abiotic factors (e.g., nutrients, physical factors, chemicals, phytochemicals, essential trace elements), which are of great significance to the effective reduction of MC. Furthermore, comparison of MC-synthesizing genes in different cyanobacterial strains was performed, and the related factors affecting MC synthesis were summarized. Then, the problems and gaps regarding the biological effect of exogenous factors on microcystin synthesis were discussed. This review article may provide new ideas for addressing the challenges and bottlenecks of MC management.