Explore the vast range of titles available.

In the 21st century, nanomaterials play an increasingly important role in our lives with applications in many sectors, including agriculture, biomedicine, and biosensors. Over the last two decades, extensive research has been conducted to find ways to synthesise nanoparticles (NPs) via mediation with fungi or fungal extracts. Mycosynthesis can potentially be an energy-efficient, highly adjustable, environmentally benign alternative to conventional physico-chemical procedures. This review investigates the role of metal toxicity in fungi on cell growth and biochemical levels, and how their strategies of resistance, i.e., metal chelation, biomineral formation, biosorption, bioaccumulation, compartmentalisation, and efflux of metals from cells, contribute to the synthesis of metal-containing NPs used in different applications, e.g., biomedical, antimicrobial, catalytic, biosensing, and precision agriculture. The role of different synthesis conditions, including that of fungal biomolecules serving as nucleation centres or templates for NP synthesis, reducing agents, or capping agents in the synthesis process, is also discussed. The authors believe that future studies need to focus on the mechanism of NP synthesis, as well as on the influence of such conditions as pH, temperature, biomass, the concentration of the precursors, and volume of the fungal extracts on the efficiency of the mycosynthesis of NPs.

Selenium and iodine are essential trace elements for both humans and animals. Among other things, they have an essential role in thyroid function and the production of important hormones by the thyroid gland. Unfortunately, in many areas, soils are deficient in selenium and iodine, and their amount is insufficient to produce crops with adequate contents to cover the recommended daily intake; thus, deficiencies have an endemic character. With the introduction of iodized table salt in the food industry, the thyroid status of the population has improved, but several areas remain iodine deficient. Furthermore, due to the strong relationship between iodine and selenium in metabolic processes, selenium deficiency often compromises the desired positive impact of salt iodization efforts. Therefore, a considerable number of studies have looked for alternative methods for the simultaneous supplementation of selenium and iodine in foodstuff. In most cases, the subject of these studies is crops; recently, meat has also been a subject of interest. This paper reviews the most recent strategies in agriculture to fortify selenium and iodine in crop plants, their effect on the quality of the plant species used, and the potential impact of food processing on their stability in fortified crops.

Engineered nanoparticles (ENPs) have potential application in precision farming and sustainable agriculture. Studies have shown that ENPs enhance the efficiency of the delivery of agrochemicals and thus, have the potential to positively affect the environment, thereby improving the growth and health of the crops. However, the majority of the research on the effects of ENPs on plants and in agricultural applications have been limited to controlled laboratory conditions. These conditions do not fully consider various aspects inherent to the growth of agricultural plants in fields under changing weather and climate. Some of the most investigated ENPs in the agricultural research area are ZnO nanoparticles (ZnO NPs) and TiO2 nanoparticles (TiO2 NPs). ZnO NPs have the potential to increase crop production and stress resistance, mainly by the slow release of Zn ions to crops. Unlike ZnO NPs, TiO2 NPs have less well-understood means of action, and are generally considered as plant growth promoter. This mini review presents information compiled for ZnO and TiO2 NPs, their influence on agricultural plants with emphasis on particularly effect on plant growth, nutrient distribution and pollution remediation under field conditions. It is concluded that in order to gain a broader perspective, more field studies are needed, particularly multigeneration studies, to fully understand the effects of the ENPs on agricultural plants’ growth and improvement of their health.

Nano-fertilisers have only recently been introduced to intensify plant production, and there still remains inadequate scientific knowledge on their plant-related effects. This paper therefore compares the effects of two nano-fertilisers on common sunflower production under field conditions. The benefits arising from the foliar application of micronutrient-based zinc oxide fertiliser were compared with those from the titanium dioxide plant-growth enhancer. Both the zinc oxide (ZnO) and titanium dioxide (TiO2) were delivered by foliar application in nano-size at a concentration of 2.6 mg·L−1. The foliar-applied nanoparticles (NPs) had good crystallinity and a mean size distribution under 30 nm. There were significant differences between these two experimental treatments in the leaf surfaces’ trichomes diversity, ratio, width, and length at the flower-bud development stage. Somewhat surprisingly, our results established that the ZnO-NPs treatment induced generally better sunflower physiological responses, while the TiO2-NPs primarily affected quantitative and nutritional parameters such as oil content and changed sunflower physiology to early maturation. There were no differences detected in titanium or zinc translocation or accumulation in the fully ripe sunflower seeds compared to the experimental controls, and our positive results therefore encourage further nano-fertiliser research.

Fungi contain species with a plethora of ways of adapting to life in nature. Consequently, they produce large amounts of diverse biomolecules that can be generated on a large scale and in an affordable manner. This makes fungi an attractive alternative for many biotechnological processes. Ascomycetes and basidiomycetes are the most commonly used fungi for synthesis of metal-containing nanoparticles (NPs). The advantages of NPs created by fungi include the use of non-toxic fungus-produced biochemicals, energy efficiency, ambient temperature, pressure conditions, and the ability to control and tune the crystallinity, shape, and size of the NPs. Furthermore, the presence of biomolecules might serve a dual function as agents in NP formation and also capping that can tailor the (bio)activity of subsequent NPs. This review summarizes and reviews the synthesis of different metal, metal oxide, metal sulfide, and other metal-based NPs mediated by reactive media derived from various species. The phyla ascomycetes and basidiomycetes are presented separately. Moreover, the practical application of NP mycosynthesis, particularly in the fields of biomedicine, catalysis, biosensing, mosquito control, and precision agriculture as nanofertilizers and nanopesticides, has been studied so far. Finally, an outlook is provided, and future recommendations are proposed with an emphasis on the areas where mycosynthesized NPs have greater potential than NPs synthesized using physicochemical approaches. A deeper investigation of the mechanisms of NP formation in fungi-based media is needed, as is a focus on the transfer of NP mycosynthesis from the laboratory to large-scale production and application.

It has been shown that the foliar application of inorganic nano-materials on cereal plants during their growth cycle enhances the rate of plant productivity by providing a micro-nutrient source. We therefore studied the effects of foliarly applied ZnO nanoparticles (ZnO NPs) on Setaria italica L. foxtail millet’s quantitative, nutritional, and physiological parameters. Scanning electron microscopy showed that the ZnO NPs have an average particle size under 20 nm and dominant spherically shaped morphology. Energy dispersive X-ray spectrometry then confirmed ZnO NP homogeneity, and X-ray diffraction verified their high crystalline and wurtzite-structure symmetry. Although plant height, thousand grain weight, and grain yield quantitative parameters did not differ statistically between ZnO NP-treated and untreated plants, the ZnO NP-treated plant grains had significantly higher oil and total nitrogen contents and significantly lower crop water stress index (CWSI). This highlights that the slow-releasing nano-fertilizer improves plant physiological properties and various grain nutritional parameters, and its application is therefore especially beneficial for progressive nanomaterial-based industries.

Gold nanoparticles (Au-NP) are frequently used as model nanomaterials to study nanoparticle behavior in plants due to their analytical detectability and negligible natural background in plant tissues. However, the feasibility of visualizing the spatial distribution of foliar-applied Au-NP at low exposure levels using laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) remains insufficiently explored. In this study, commercially sourced Au-NP were applied to lentil leaves (Lens culinaris var. Beluga) at a low concentration of 0.5 mg·L−1 using a controlled leaf submersion approach. Leaves were sampled at 1 h, 24 h, and 96 h post-exposure and analyzed by LA-ICP-MS imaging to assess time-dependent changes in gold-associated spatial signals, and to compare elemental distribution patterns with non-exposed controls. Untreated control leaves showed no detectable gold at any sampling time point, confirming negligible native Au background. In treated leaves, LA-ICP-MS imaging revealed an initially localized Au hotspot at 1 h, followed by progressive Au redistribution toward the leaf margins and petiole region by 24 h and 96 h. Gold signals persisted over the full 96 h period, indicating stable association of Au-NP with leaf tissue. Comparative elemental mapping of Ca, Mg, K, P, Fe, Zn, and Cu showed no persistent differences in spatial distribution patterns between treated and control leaves as detectable by LA-ICP-MS. This study demonstrates the feasibility of LA-ICP-MS imaging for visualizing the deposition and temporal spatial redistribution of low-dose foliar-applied nanoparticles in intact leaves. The results provide a methodological reference for future hypothesis-driven studies that apply nanoparticles under more controlled conditions, include increased replication, and combine multiple analytical techniques.

Nanotechnology offers new opportunities for the development of novel materials and strategies that improve technology and industry. This applies especially to agriculture, and our previous field studies have indicated that zinc oxide nanoparticles provide promising nano-fertilizer dispersion in sustainable agriculture. However, little is known about the precise ZnO-NP effects on legumes. Herein, 1 mg·L−1 ZnO-NP spray was dispersed on lentil plants to establish the direct NP effects on lentil production, seed nutritional quality, and stress response under field conditions. Although ZnO-NP exposure positively affected yield, thousand-seed weight and the number of pods per plant, there was no statistically significant difference in nutrient and anti-nutrient content in treated and untreated plant seeds. In contrast, the lentil water stress level was affected, and the stress response resulted in statistically significant changes in stomatal conductance, crop water stress index, and plant temperature. Foliar application of low ZnO-NP concentrations therefore proved promising in increasing crop production under field conditions, and this confirms ZnO-NP use as a viable strategy for sustainable agriculture.

Zinc is among the most in-demand metals in the world which also means that a considerable amount of this element is released to the environment each year as a result of human activities. A pot experiment was conducted to study the impact of low- and high-dose zinc amendments on plant growth and biomass yield, with Calcic Chernozem as a growing medium and barley (Hordeum vulgare L.) as a model plant. The distribution of zinc in various plant parts was also investigated. Zn (II) was added in powder as bulk ZnO and in solution as ZnO nanoparticles and ZnSO4 in two dosages (3 and 30 mmol kg−1 soil) prior to planting. The plants were harvested after 10 days of growth. The three sets of data were taken under identical experimental conditions. The application of zinc in aqueous solution and in particulate form (having particle sizes in the range of <100 nm to >500 nm) at concentration of 3 and 30 mmol Zn kg−1 to the soil resulted in decreased growth (root length, shoot length) and biomass yield; the only exception was the addition of 30 mmol Zn kg−1 in the form of bulk ZnO, which had a positive effect on the root growth. The dry weight reduction (sprout biomass) was lowest in plants grown in soil treated with dissolved zinc. There were no statistically significant changes in the content of chlorophyll a, chlorophyll b, and total chlorophyll, although flame atomic absorption spectrometry (FAAS) analysis indicated that plants bioaccumulated the zinc applied. This implies that the transport of zinc into the above-ground plant parts is controlled by the presence of effective mechanical and physiological barriers in roots. Crop performance under zinc stress in relation to biomass production and the growth of roots and shoots is also partly a reflection of the effects of soil properties. Our findings emphasize the importance of considering plant-soil interactions in research of potential toxicity and bioavailability of zinc in the environment.

Besides many natural factors, soil pH and temperature can have significant effects on the sorption of pharmaceuticals in soils. This is the first study, which aimed to evaluate the effect of soil pH and temperature on the sorption of ibuprofen in soil. Sorption–desorption experiments at 20°C indicated weak retention of ibuprofen in the soil. Sorption of ibuprofen in the soil was affected by both temperature and pH with the latter showing much greater effect. The extent of ibuprofen sorption increased with decreasing pH mainly due to the change of ibuprofen speciation from negatively charged ions at high pH to the neutral form at low pH. At pH 4, the distribution coefficient Kd was 1.30 l/kg, whereas at pH 8, it was only 0.42 l/kg. When temperature increased, the sorption of ibuprofen decreased, showing that its sorption was exothermic.