Explore the vast range of titles available.

The aim of this work was to fabricate novel bioactive composites based on chitosan and non-organic silica, reinforced with calcium β-glycerophosphate (Ca-GP), sodium β-glycerophosphate pentahydrate (Na-GP), and hydroxyapatite powder (HAp) in a range of concentrations using the sol–gel method. The effect of HAp, Na-GP, and Ca-GP contents on the mechanical properties, i.e., Young’s modulus, compressive strength, and yield strain, of hybrid composites was analyzed. The microstructure of the materials obtained was visualized by SEM. Moreover, the molecular interactions according to FTIR analysis and biocompatibility of composites obtained were examined. The CS/Si/HAp/Ca-GP developed from all composites analyzed was characterized by the well-developed surface of pores of two sizes: large ones of 100 μm and many smaller pores below 10 µm, the behavior of which positively influenced cell proliferation and growth, as well as compressive strength in a range of 0.3 to 10 MPa, Young’s modulus from 5.2 to 100 MPa, and volumetric shrinkage below 60%. This proved to be a promising composite for applications in tissue engineering, e.g., filling small bone defects.

The efficiency with which plants use nutrients to create biomass and/or grain is determined by the interaction of environmental and plant intrinsic factors. The major macronutrients, especially nitrogen (N), limit plant growth and development (1.5–2% of dry biomass) and have a direct impact on global food supply, fertilizer demand, and concern with environmental health. In the present time, the global consumption of N fertilizer is nearly 120 MT (million tons), and the N efficiency ranges from 25 to 50% of applied N. The dynamic range of ideal internal N concentrations is extremely large, necessitating stringent management to ensure that its requirements are met across various categories of developmental and environmental situations. Furthermore, approximately 60 percent of arable land is mineral deficient and/or mineral toxic around the world. The use of chemical fertilizers adds to the cost of production for the farmers and also increases environmental pollution. Therefore, the present study focused on the advancement in fertilizer approaches, comprising the use of biochar, zeolite, and customized nano and bio-fertilizers which had shown to be effective in improving nitrogen use efficiency (NUE) with lower soil degradation. Consequently, adopting precision farming, crop modeling, and the use of remote sensing technologies such as chlorophyll meters, leaf color charts, etc. assist in reducing the application of N fertilizer. This study also discussed the role of crucial plant attributes such as root structure architecture in improving the uptake and transport of N efficiency. The crosstalk of N with other soil nutrients plays a crucial role in nutrient homeostasis, which is also discussed thoroughly in this analysis. At the end, this review highlights the more efficient and accurate molecular strategies and techniques such as N transporters, transgenes, and omics, which are opening up intriguing possibilities for the detailed investigation of the molecular components that contribute to nitrogen utilization efficiency, thus expanding our knowledge of plant nutrition for future global food security.

Plant tissue culture technique employed for the identification and isolation of bioactive phytocompounds has numerous industrial applications. It provides potential benefits for different industries which include food, pharmaceutical and cosmetics. Various agronomic crops i.e., cereals, fruits, vegetables, ornamental plants and forest trees are currently being used for in vitro propagation. Plant tissue culture coupled with biotechnological approaches leads towards sustainable agricultural development providing solutions to major food security issues. Plants are the rich source of phytochemicals with medicinal properties rendering them useful for the industrial production of pharmaceuticals and nutraceuticals. Furthermore, there are numerous plant compounds with application in the cosmetics industry. In addition to having moisturizing, anti‐ageing, anti‐wrinkle effects; plant-derived compounds also possess pharmacological properties such as antiviral, antimicrobial, antifungal, anticancer, antioxidant, anti-inflammatory, and anti-allergy characteristics. The in vitro propagation of industrially significant flora is gaining attention because of its several advantages over conventional plant propagation methods. One of the major advantages of this technique is the quick availability of food throughout the year, irrespective of the growing season, thus opening new opportunities to the producers and farmers. The sterile or endangered flora can also be conserved by plant micro propagation methods. Hence, plant tissue culture is an extremely efficient and cost-effective technique for biosynthetic studies and bio-production, biotransformation, or bioconversion of plant-derived compounds. However, there are certain limitations of in-vitro plant regeneration system including difficulties with continuous operation, product removal, and aseptic conditions. For sustainable industrial applications of in-vitro regenerated plants on a large scale, these constraints need to be addressed in future studies.

The formation of new scaffolds to enhance healing magnitude is necessarily required in biomedical applications. Granulation tissue formation is a crucial stage of wound healing in which granulation tissue grows on the surface of a wound by the formation of connective tissue and blood vessels. In the present study, porous hydrogels were synthesized using chitosan incorporating latex of the Calotropis procera plant by using a freeze–thaw cycle to stimulate the formation of granulation tissue and angiogenesis in wound healing applications. Structural analysis through Fourier transform infrared (FTIR) spectroscopy confirmed the interaction between chitosan and Calotropis procera. Latex extract containing hydrogel showed slightly higher absorption than the control during water absorption analysis. Thermogravimetric analysis showed high thermal stability of the 60:40 combination of chitosan (CS) and Calotropis procera as compared to all other treatments and controls. A fabricated scaffold application on a chick chorioallantoic membrane (CAM) showed that all hydrogels containing latex extract resulted in a significant formation of blood vessels and regeneration of cells. Overall, the formation of connective tissues and blood capillaries and healing magnitude decreased in ascending order of concentration of extract.

Knowledge of the drying properties of tobacco in high temperatures above 100 °C and its dust are crucial in the design of dryers, both in the optimization of the superheated-steam-drying process and in the correct selection of innovative explosion protection and mitigation systems. In this study, tobacco properties were determined and incorporated into the proposed model of an expanding superheated steam flash dryer. The results obtained from the proposed model were validated by using experimental data yielded during test runs of an industrial scale of a closed-loop expansion dryer on lamina cut tobacco. Moreover, the explosion and fire properties of tobacco dust before and after the superheated steam-drying process at 160, 170, 180, and 190 °C were experimentally investigated, using a 20 L spherical explosion chamber, a hot plate apparatus, a Hartmann tube apparatus, and a Godbert–Greenwald furnace apparatus. The results indicate that the higher the drying temperature, the more likely the ignition of the dust tobacco cloud, the faster the explosion flame propagation, and the greater the explosion severity. Tobacco dust is of weak explosion class. Dust obtained by drying with superheated steam at 190 °C is characterized by the highest value of explosion index amounting to 109 ± 14 m·bar·s−1, the highest explosion pressure rate (405 ± 32 bar/s), and the maximum explosion pressure (6.7 ± 0.3 bar). The prevention of tobacco-dust accumulation and its removal from the outer surfaces of machinery and equipment used in the superheated steam-drying process are highly desirable.

This study aimed to develop and optimize polyvinyl alcohol (PVA)-based polymeric films containing resveratrol (RSV) and to evaluate their applicability as oral mucosal wound dressings. Given the dynamic and complex nature of the oral environment, physicochemical parameters such as elasticity, mucoadhesive strength, and the release profile of the RSV were systematically investigated. The therapeutic performance of pure resveratrol was compared with that of an extract derived from Reynoutria japonica. Films were fabricated using a solvent casting method and characterized in terms of thickness uniformity, weight, color consistency, and flexibility, all of which met the required pharmaceutical criteria. Two tested formulations, FR2 (RSV/PVA/PVP/MCA15C/NaCMC/W/PGE), FE2 (extract/PVA/PVP/MCA15C/NaCMC/W/PGE), showed the best mucoadhesive properties (261.11 ± 0.5 g for FR2 and 299.43 ± 0.38 g for FE2) and a favorable release profile both in water (72.42% for FR2, 77.23% for FE2) and in saliva (49.74% for FR2, 49.70% for FE2). Moreover, the optimized films are characterized by hydrophilicity (contact angle < 90°) and the pH value of the extract after their blurring is close to physiological, which promotes better tolerance and reduces the risk of irritation. Obtained results for polymeric films with resveratrol and R. japonica extract confirmed their great potential for use in dentistry as modern, mucoadhesive dressings, improving the effectiveness of local therapies.

The intensive use of chemical fertilizers in arable farming dramatically increased environmental pollution through anthropogenic ammonia (NH 3 ) and greenhouse gaseous emissions. Therefore, there is a need to develop improved fertilizer management practices that can reduce these losses. An experiment was conducted to assess the mitigating effects of sole or combined application of zeolite with biochar on gaseous emissions from arable land. For this purpose, zeolite (clinoptilolite) was mixed with different doses of biochar (produced from Dalbergia Sissoo wood chips) and applied along with the recommended dose of chemical fertilizer (NPK @ 150, 100, and 60 kg ha –1 , respectively) on arable land in years 2013–14 and 2014–15. Immediately after application, these were incorporated into the top 10 cm of the soil layer and wheat was sown. Treatments were as follows: C = control, Z = zeolite @ 5 t ha –1 , B1Z = biochar @ 3 t ha –1 + zeolite @ 5 t ha –1 , B2Z = biochar @ 6 t ha –1 + zeolite @ 5 t ha –1 , and B3Z = biochar @ 9 t ha –1 + zeolite @ 5 t ha –1 . The experiment was laid out in a randomized complete block design (RCBD) with three replicates. The experimental plot size was 6 m × 4 m. Randomly, ten soil samples from each plot were taken at a depth of 0–15 cm and mixed to get a composite sample. All the samples were immediately stored in a freezer at −18°C until gaseous analysis in order to prevent N transformations. Each soil sample was analyzed for emission of NH 3 , CO 2 , and CH 4 by using a selected-ion flow-tube mass spectrometer (SIFT-MS). Co-application of zeolite and biochar reduced NH 3 and CH 4 emissions by an average of 87 and 58% compared to the control, respectively. However, CO 2 emission was increased by 104% relative to the control. The NH 3 emission was decreased by an average of 61, 78, 90, and 92% by Z, B1Z, B2Z, and B3Z treatments compared to the control. Similarly, the decrement in CH 4 emission was 47, 54, 55, and 65%. In contrast, the increment in CO 2 emission was 42, 110, and 160% for B1Z, B2Z, and B3Z, respectively, while interestingly, a reduction of 12% was observed in Z treatment. Besides, co-application of zeolite and biochar at the highest dose (B3Z) improved soil chemical properties such as soil EC, OM, total N, as well as available P and K relative to zeolite alone. It is concluded that the combined application of zeolite and biochar can mitigate NH 3 and greenhouse emissions and improve soil chemical characteristics, thus enhancing the environmental worth of arable farming.

Due to limited conventional energy sources, there is a need to find substitute non-conventional sources of energy to meet the societal demands on a sustainable basis. Crude oil and edible oil remain major import items in Pakistan, the deficit of which can be compensated by using biomass, preferably inedible oilseeds. Therefore, the current study evaluated the role of sulfur (S) fertilization for improving yield (seed and oil) and biodiesel value of castor bean, a potential inedible crop with minimum input requirements. For this purpose, a combined approach of field experimentation and laboratory analysis was conducted to explore the potential of two castor bean cultivars (DS-30 and NIAB Gold) against four S supply rates, namely, 0, 20, 40, and 60 kg S ha –1 , in terms of growth, phenology, and yield parameters. Subsequently, the obtained seed samples were analyzed for biodiesel-related parameters in the Bio-analytical Chemistry lab, Punjab Bio-energy Institute, Faisalabad. The incremental S rates increased the seed yield for both cultivars, and the highest yield was recorded at 60 kg S ha –1 for NIAB Gold. For NIAB Gold, the oil content increased by 7% with S fertilization at 60 kg ha –1 , and for DS-30, the oil content increased by 6% at 60 kg ha –1 . As with incremental S fertilization, the oil yield increased on a hectare basis, and the quantity of biodiesel produced also increased. Importantly, the tested quality parameters of biodiesel, except biodiesel viscosity, were in the ASTM standard range. Overall, it has been concluded that castor bean is a promising and sustainable option for producing biodiesel as it is non-competitive to food crops and requires little input.

With the provoked environmental constraints under extreme climatic events, a better understanding of plant responses to these environmental stresses helps in obtaining sustainable productivity. Wheat is a significant cereal crop for the burgeoning population; its yield is significantly limited by too little water in the rhizosphere. The ramifications of water deficiency on the wheat crop can be reduced by the application of vermicompost. With the objective to cope with drought stress, a wire-house experiment was established where seedlings of two cultivars, viz., Faisalabad-08 and Galaxy-13 (drought-tolerant and -sensitive cultivar, respectively) were grown in pots and exposed to mild drought (D1, 45% field capacity) and severe drought stress (D2, 30% field capacity). A control with well-watered condition (70% field capacity) was kept for comparison. Various application rates of wheat straw vermicompost (control (VT 0 ), 4 t ha −1 (VT 1 ), 6 t ha −1 (VT 2 ), and 8 t ha −1 (VT 3 )), were used in soil-filled pots under drought and control treatments. Our data depicted that compared with control, drought treatments recorded a significant reduction in morpho-physiological and biochemical attributes with maximum reduction under severe drought conditions. Nonetheless, it was observed that soil application of vermicompost, particularly at a high rate, ameliorated the negative effects of drought. Under severe drought conditions, a significant and positive influence on morphological and physiological traits was recorded for VT 3 treatment, which increased root and shoot length by 27.55 and 27.85%, root and shoot fresh weight by 26.98 and 28.20%, root and shoot dry weight by 40 and 50.05%, and photosynthesis and transpiration rate by 27.65 and 49.25%, respectively, on average of two cultivars. Similarly, VT 3 also significantly ameliorated the adverse effect of drought by enhancing the antioxidant enzyme activities as it increased superoxide dismutase activity by 14.28%, peroxidase by 27.28%, and catalase by 50% compared to the control treatment. Among cultivars, Faisalabad-2008 showed comparatively more resistance against drought stress. The findings of this work revealed that drought drastically reduced the growth and productivity of wheat; however, soil-applied vermicompost positively influenced the performance of wheat cultivars.

[This corrects the article DOI: 10.3389/fpls.2022.1009395.].