Explore the vast range of titles available.

This study investigates the development of sustainable ceramic materials using industrial and agricultural waste from the Kyzylorda region of Kazakhstan. The research focuses on the combined use of local clay, ash from the Kyzylorda thermal power plant (TPP), and rice husk ash (RHA). Experimental investigations included the evaluation of chemical composition, linear and volumetric shrinkage, water absorption, bulk density, and compressive strength of ceramic samples fired at 950–1050 °C. Microstructural (SEM) and phase composition (XRD) analyses were performed to explain the observed behavior. The results showed that the optimal composition was 70% clay, 20% TPP ash, and 10% RHA, which demonstrated the highest compressive strength (15.45 MPa), reduced water absorption, and improved densification. The enhanced performance is attributed to partial vitrification and viscous-phase-assisted densification and the formation of crystalline phases such as mullite, cristobalite, and anorthite. The study confirms that the combined use of TPP ash and RHA enables effective recycling of local waste materials and improves the physical and mechanical properties of ceramic products.

This study investigates the development of a composite material based on agricultural plant waste from Kazakhstan, utilizing a multicomponent binder incorporated with rice husk ash. The implementation of low-clinker binders enables the full utilization of ash dumps from the Kyzylorda thermal power plant (TPP) and rice husk residues from local rice-processing enterprises. Physical and chemical analysis of the ash–cement stone revealed a reduction in portlandite content compared to control samples. Phase composition analysis indicated the presence of hydroaluminate C4AH13 and a reduction in calcite, suggesting accelerated crystallization of calcium silicate hydrates. The formation of crystalline phases and intergrowth structures is assumed to contribute to the strengthening of the gel-like matrix. Experimental optimization of the ash–cement binder with rice husk ash yielded compressive strengths ranging from 3.03 to 4.10 MPa at densities of 790–900 kg/m3, depending on the type of organic filler. These results confirm the feasibility of using locally sourced agricultural waste for the production of heat-insulating and structurally stable composite materials.