Explore the vast range of titles available.

PurposeWe have previously reported on a polymeric micellar formulation of Cyclosporine A (CyA) based on poly(ethylene oxide)-block-poly(ε-caprolactone) (PEO5K-b-PCL13K) capable of changing drug biodistribution and pharmacokinetic profile following intravenous administration. The objective of the present study was to explore the potential of this formulation in changing the tissue distribution and pharmacokinetics of the encapsulated CyA following oral administration making comparisons with Sandimmune®.MethodsThe in vitro CyA release and stability CyA-loaded PEO-b-PCL micelles (CyA-micelles) were evaluated in biorelevant media. The pharmacokinetics and tissue distribution of orally administered CyA-micelles or Sandimmune® and tissue distribution of traceable Cyanine-5.5 (Cy5.5)-conjugated PEO-b-PCL micelles were then investigated in healthy rats.ResultsCyA-micelles showed around 60–70% CyA release in simulated intestinal and gastric fluids within 24 h, while Sandimmune® released its entire CyA content in the simulated intestinal fluid. CyA-micelles and Sandimmune® showed similar pharmacokinetics, but different tissue distribution profile in rats. In particular, the calculated AUC for CyA-micelles was higher in liver, comparable in heart, and lower in spleen, lungs, and kidneys when compared to that for Sandimmune®.ConclusionsThe results point to the influence of excipients in Sandimmune® on CyA disposition and more inert nature of PEO-b-PCL micelles in defining CyA biological interactions.

Nanotechnology and nanoparticles (NPs) have increasingly been studied as an alternative for antibiotics because of the feasibility to be used in implantable devices both for bacterial detection and infection prevention. The low rate of resistance development against NPs because of its multiple mode of action has contributed to its increased acceptance in clinical setting. Further development of NPs and their anticancer activity against many human cancer cell lines including breast and ovarian have been documented. Fe2O3-NPs could be used for antibacterial and anticancer activity assessment. Iron oxide, apart from being available extensively and cheap, also plays a role in multiple biological processes, making it an interesting metal for NPs. The aim of the present study revolves around generation and characterization of iron oxide Fe2O3-NPs, followed by assessment of its antimicrobial and anticancer activities. Synthesis of Fe2O3-NPs was performed by hydrothermal approach, and its characterization was done by UV-visible, X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR) analyses, and transmission electron microscopy (TEM). Antimicrobial activity was checked by agar diffusion assay against Bacillus subtilis, Pseudomonas aeruginosa, Staphylococcus aureus, Escherichia coli, and Candida albicans. Anticancer activity of the NPs was assessed using the human cancer cell lines including cervical carcinoma cell line (HeLa) and MCF7. The developed Fe2O3-NPs exhibited a characteristic absorption curve in the 500-600 nm wavelength range by UV-visible analysis, the XRD peaks were found to index the rhombohedral shape, and the FTIR analysis ascertained the bonds and functional groups at wavenumber from 400 to 4000 cm-1. Antimicrobial assay detected significant effect against Staphylococcus aureus and Bacillus subtilis with zones of inhibition: 21 and 22 mm, respectively. Likewise, Fe2O3-NPs show good activity towards tested fungal strain Candida albicans with zone of inhibition of 24 mm. The 2,5-diphenyl-2H-tetrazolium bromide (MTT) assay identified significant anticancer activity of the NPs against both cell lines. Our study documents the successful generation and characterization of Fe2O3-NPs having excellent antimicrobial and anticancer activities.

The present work aimed to remove azithromycin (AZM) from the contaminated aqueous system using a water/ethanol/transcutol/Capryol-90 green nanoemulsion. The drug is identified as a potential pharmaceutical contaminant detrimental for flora and fauna of aquatic lives as well as human health. Green nanoemulsions were tailored and characterized for thermodynamic stability, size, polydispersity index (PDI), zeta potential, viscosity, refractive index (RI), and morphological assessment using a transmission electron microscopy (TEM). Moreover, nanoemulsions were investigated for percent removal efficiency (%RE) and factors affecting percent removal efficiency (%RE). The results suggested that the developed green nanoemulsions (ANE1–ANE5) were transparent (˂ 200 nm) and stable. ANE5 exhibited the lowest value of globular size (49 nm), PDI (0.17), viscosity (~ 93 cP), and optimum zeta potential (−27.8 mV). The value of %RE depended upon the content of water and Capryol-90 of the nanoemulsion. Furthermore, the value of %RE was found to be increased with increased content of water, whereas this was decreased on increasing the Capryol-90 content in the nanoemulsions. Similarly, on decreasing the values of size and viscosity, the %RE values were observed to be increased. There was insignificant impact of the duration of exposure time on %RE. Thus, the maximum %RE value (96.8%) was obtained by ANE5 from the aqueous solution after 20 min of contact time with ANE5. Thus, this method could be a promising approach to remove AZM from the contaminated water and serve as an alternative to conventional methods. Graphical abstract

Low aqueous solubility and membrane permeability of some drugs are considered major limitations for their use in clinical practice. Polymeric micelles are one of the potential nano-drug delivery systems that were found to ameliorate the low aqueous solubility of hydrophobic drugs. The main objective of this study was to develop and characterize a novel copolymer based on poly (ethylene glycol) stearate (Myrj™)-block-poly(ε-caprolactone) (Myrj-b-PCL) and evaluate its potential as a nanosystem for ocular delivery of cyclosporine A (CyA). Myrj-b-PCL copolymer with various PCL/Myrj ratios were synthesized via ring-opening bulk polymerization of ε-caprolactone using Myrj (Myrj S40 or Myrj S100), as initiators and stannous octoate as a catalyst. The synthesized copolymers were characterized using 1H NMR, GPC, FTIR, XRD, and DSC. The co-solvent evaporation method was used to prepare CyA-loaded Myrj-b-PCL micelles. The prepared micelles were characterized for their size, polydispersity, and CMC using the dynamic light scattering (DLS) technique. The results from the spectroscopic and thermal analyses confirmed the successful synthesis of the copolymers. Transmission electron microscopy (TEM) images of the prepared micelles showed spherical shapes with diameters in the nano range (<200 nm). Ex vivo corneal permeation study showed sustained release of CyA from the developed Myrj S100-b-PCL micelles. In vivo ocular irritation study (Draize test) showed that CyA-loaded Myrj S100-b-PCL88 was well tolerated in the rabbit eye. Our results point to a great potential of Myrj S100-b-PCL as an ocular drug delivery system.

Uveitis is an ocular illness that if not treated properly can lead to a total loss of vision. In this study, we evaluated the utility of HA-coated Dexamethasone-sodium-phosphate (DEX)-chitosan nanoparticles (CSNPs) coated with hyaluronic acid (HA) as a sustained ocular delivery vehicle for the treatment of endotoxin-induced-uveitis (EIU) in rabbits. The CSNPs were characterized for particle size, zeta potential, polydispersity, surface morphology, and physicochemical properties. Drug encapsulation, in vitro drug release, and transcorneal permeation were also evaluated. Finally, eye irritation, ocular pharmacokinetics, and pharmacodynamics were in vivo. The CSNPs ranged from 310.4 nm and 379.3 nm pre-(uncoated) and post-lyophilization (with HA-coated), respectively. The zeta potentials were +32 mV (uncoated) and −5 mV (HA-uncoated), while polydispersity was 0.178–0.427. Drug encapsulation and loading in the CSNPs were 73.56% and 6.94% (uncoated) and 71.07% and 5.54% (HA-coated), respectively. The in vitro DEX release over 12 h was 77.1% from the HA-coated and 74.2% from the uncoated NPs. The physicochemical properties of the CSNPs were stable over a 3-month period when stored at 25 °C. Around a 10-fold increased transcorneal-flux and permeability of DEX was found with HA-CSNPs compared to the DEX-aqueous solution (DEX-AqS), and the eye-irritation experiment indicated its ocular safety. After the ocular application of the CSNPs, DEX was detected in the aqueous humor (AH) till 24 h. The area under the concentrations curve (AUC0–24h) for DEX from the CSNPs was 1.87-fold (uncoated) and 2.36-fold (HA-coated) higher than DEX-AqS. The half-life (t1/2) of DEX from the uncoated and HA-coated NPs was 2.49-and 3.36-fold higher, and the ocular MRT0-inf was 2.47- and 3.15-fold greater, than that of DEX-AqS, respectively. The EIU rabbit model showed increased levels of MPO, TNF-α, and IL-6 in AH. Topical DEX-loaded CSNPs reduced MPO, TNF-α, and IL-6 levels as well as inhibited NF-κB expression. Our findings demonstrate that the DEX-CSNPs platform has improved the delivery properties and, hence, the promising anti-inflammatory effects on EIU in rabbits.

Cypermethrin (Cyp) is a pyrethroid that has been associated with the toxicity of various organs. The aim of our study was to evaluate the hepatoprotective and antioxidant activities of nano-piperine (NP) against Cyp toxicity. Cyp (50 mg/kg) was administered orally in all animals of groups III–VI for 15 days. Groups IV–VI each received three doses of NP (125, 250, and 500 µg/kg/day) for 10 days after receiving the Cyp dosage, which was given after 1 h. A rise in serum biomarkers (ALT, AST, ALP, total protein, and albumin), which are indicators of toxicity alongside anomalous oxidative stress indices (lipid peroxidation (LPO), glutathione (GSH), superoxide dismutase (SOD) and catalase), was detected. After Cyp treatment, we observed upregulated cytokines, caspase expression, and histological analysis that the showed distortion of cell shape. However, the administration of NP dramatically reversed all of the Cyp-induced alterations, inducing reductions in serum marker levels, stress level, the production of cytokines, and caspase expression. Additionally, all of the histopathological alterations were minimized to values that were comparable to normal levels. The present findings suggested that NP exhibits potent antioxidant and anti-inflammatory activities that can protect rats’ livers against Cyp-induced liver damage through hepatoprotective activities.

The aim of this study was the successful utilization of the positively charged nanocrystals (NCs) of Tedizolid Phosphate (TZP) (0.1% w/v) for topical ocular applications. TZP belongs to the 1, 3-oxazolidine-2-one class of antibiotics and has therapeutic potential for the treatment of many drug-resistant bacterial infections, including eye infections caused by MRSA, penicillin-resistant Streptococcus pneumonia and vancomycin-resistant Enterococcus faecium. However, its therapeutic usage is restricted due to its poor aqueous solubility and limited ocular availability. It is a prodrug and gets converted to Tedizolid (TDZ) by phosphatases in vivo. The sterilized NC1 was subjected to antimicrobial testing on Gram-positive bacteria. Ocular irritation and pharmacokinetics were performed in rabbits. Around a 1.29 to 1.53-fold increase in antibacterial activity was noted for NC1 against the B. subtilis, S. pneumonia, S. aureus and MRSA (SA-6538) as compared to the TZP-pure. The NC1-AqS was “practically non-irritating” to rabbit eyes. There was around a 1.67- and 1.43 fold increase in t1/2 (h) and Cmax (ngmL−1) while there were 1.96-, 1.91-, 2.69- and 1.41-times increases in AUC0–24h,AUC0–∞,AUMC0–∞ and MRT0–∞, respectively, which were found by NC1 as compared to TZP-AqS in the ocular pharmacokinetic study. The clearance of TDZ was faster (11.43 mLh−1) from TZP-AqS as compared to NC1 (5.88 mLh−1). Relatively, an extended half-life (t1/2; 4.45 h) of TDZ and the prolonged ocular retention (MRT0–∞; 7.13 h) of NC1 was found, while a shorter half-life (t1/2; 2.66 h) of TDZ and MRT0–∞(t1/2; 5.05 h)was noted for TZP-AqS, respectively. Cationic TZP-NC1 could offer increased transcorneal permeation, which could mimic the improved ocular bioavailability of the drug in vivo. Conclusively, NC1 of TZP was identified as a promising substitute for the ocular delivery of TZP, with better performance as compared to its conventional AqS.

Diabetic (type-2) is a metabolic disease characterized by increased blood glucose level from the normal level. In the present study, apigenin (AG) loaded lipid vesicles (bilosomes: BIL) was prepared, optimized and evaluated for the oral therapeutic efficacy. AG-BIL was prepared by a thin-film evaporation method using cholesterol, span 60 and sodium deoxycholate. The prepared formulation was optimized by 3-factor and 3-level Box-Behnken design using particle size, entrapment efficiency and drug release as a response. The selected formulation further evaluated forex-vivopermeation,in vivopharmacokinetic and pharmacodynamics study. The optimized AG bilosomes (AG-BILopt) has shown the vesicle size 183.25 ± 2.43 nm, entrapment efficiency 81.67 ± 4.87%. TEM image showed a spherical shape vesicle with sharp boundaries. The drug release study revealed a significant enhancement in AG release (79.45 ± 4.18%) from AG-BILopt as compared to free AG-dispersion (25.47 ± 3.64%). The permeation and pharmacokinetic studies result revealed 4.49 times higher flux and 4.67 folds higher AUC0-t than free AG-dispersion. The antidiabetic activity results showed significant (P < 0.05) enhancement in therapeutic efficacy than free AG-dispersion. The results also showed marked improvement in biochemical parameters. Our findings suggested, the prepared apigenin loaded bilosomes was found to be an efficient delivery in the therapeutic efficacy in diabetes.

This study aimed to investigate the potential of polycaprolactone–vitamin E TPGS (PCL-TPGS) micelles as a delivery system for oral administration of paclitaxel (PTX). The PCL-TPGS copolymer was synthesized using ring opening polymerization, and PTX-loaded PCL-TPGS micelles (PTX micelles) were prepared via a co-solvent evaporation method. Characterization of these micelles included measurements of size, polydispersity, and encapsulation efficiency. The cellular uptake of PTX micelles was evaluated in Caco-2 cells using rhodamine 123 (Rh123) as a fluorescent probe. Moreover, an everted rat sac study was conducted to evaluate the ex vivo permeability of PTX micelles. Additionally, a comparative pharmacokinetic study of PTX micelles versus the marketed formulation, Ebetaxel® (a Taxol generic), was performed after a single oral administration to rats. The results demonstrated that the micellar formulation significantly improved PTX solubility (nearly 1 mg/mL). The in vitro stability and release of PTX micelles in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) demonstrated that PTX micelles remained stable for up to 24 h and significantly slowed the release of PTX in both media compared to Ebetaxel®. The in vitro cellular uptake, ex vivo intestinal permeability, and in vivo pharmacokinetic profile demonstrated that PTX micelles enhanced the permeability and facilitated a rapid absorption of the drug. Conclusively, the PCL7000-TPGS3500 micelles exhibit potential as an effective oral delivery system for PTX.

Nano spray drying has emerged as an outstanding platform for engineering micro- and nanoparticles, with growing applications in various areas of drug delivery. As a new technology involving distinct technical design, parameters of the nano spray drying process are not fully elucidated. In a quality-by-design approach, the aim of the current study was to gain thorough understanding of critical determinants of product characteristics in the Büchi Nano Spray Dryer B-90. Following a factorial experimental design, a series of spray drying experiments were conducted to gain new insights into the influences of the inlet temperature, the spray solvent, and the solute concentration in the spray solution on the yield, the moisture content, and the particle size of the nano spray-dried powder material. Special consideration was given to the potential of using hydroethanolic in comparison with aqueous solvent systems and to particle engineering for pulmonary drug delivery. Lactose and mannitol, widely used as excipients in dry powder inhalation formulations, were used as model materials. Lactose and mannitol are known to spray dry in amorphous and crystalline forms, respectively. The yields of spray drying of lactose and mannitol amounted generally to 71.1 ± 6.6% w/w and 66.1 ± 3.5% w/w, respectively. The spray-dried materials exhibited generally a number-weighted median particle diameter of 1.6 ± 0.2 μm and a volume-weighted median particle diameter of 5.1 ± 1.0 μm. A detailed analysis of the results improved understanding of the interplay between process parameters in the Nano Spray Dryer. The results demonstrate that optimization of spray generation is the key to yield optimization. On the other hand, particle size is determined by the spray mesh pore size and the spray solution degree of saturation. Selection of an appropriate spray solvent and using spray solution additives could optimize spray flow. In parallel, the spray solvent and the solute concentration in the spray solution determine the degree of saturation. Guidance on optimization of particle engineering by nano spray drying is provided.