Explore the vast range of titles available.

Tomatoes are an important agricultural product because they contain high concentrations of bioactive substances, such as folate, ascorbate, polyphenols, and carotenoids, as well as many other essential elements. As a result, tomatoes are thought to be extremely beneficial to human health. Chemical fertilizers and insecticides are routinely utilized to maximize tomato production. In this context, microbial inoculations, particularly those containing PGPR, may be utilized in place of chemical fertilizers and pesticides. In this study, we investigated the effects of PGPR (Bacillus subtilis, and Bacillus amyloliquefaciens) and cyanobacteria when utilized alone, and in conjunction with each other, on the growth, quality, and yield of fresh fruits of tomato plants. The results showed that the inoculation significantly increased all measured parameters of tomato plants compared with the control. Combined use of B. subtilis and B. amyloliquefaciens had a positive impact on tomato yield, increasing fruit yield. Moreover, leaflet anatomical characteristics were altered, with increased thickness of the upper epidermis, lower epidermis, palisade tissue, spongy tissue, and vascular bundles. Tomato fruit quality was improved, as measured by an increased number of fruit per plant (76% increase), fruit weight (g; 33% increase), fruit height (cm; 50% increase), fruit diameter (cm; 50%), total soluble solids (TSS; 26% increase), and ascorbic acid (mg/100 g F.W.; 75% increase), relative to the control, in the first season. In addition, fruit chemical contents (N, P, and K) were increased with inoculation. The results suggest that inoculation with B. subtilis and B. amyloliquefaciens could be successfully used to enhance tomato plant growth and yield.

Salinity is a widespread abiotic stress that devastatingly impacts wheat growth and restricts its productivity worldwide. The present study is aimed at elucidating biochemical, physiological, anatomical, gene expression analysis, and agronomic responses of three diverse wheat genotypes to different salinity levels. A salinity treatment of 5000 and 7000 ppm gradually reduced photosynthetic pigments, anatomical root and leaf measurements and agronomic traits of all evaluated wheat genotypes (Ismailia line, Misr 1, and Misr 3). In addition, increasing salinity levels substantially decreased all anatomical root and leaf measurements except sclerenchyma tissue upper and lower vascular bundle thickness compared with unstressed plants. However, proline content in stressed plants was stimulated by increasing salinity levels in all evaluated wheat genotypes. Moreover, Na+ ions content and antioxidant enzyme activities in stressed leaves increased the high level of salinity in all genotypes. The evaluated wheat genotypes demonstrated substantial variations in all studied characters. The Ismailia line exhibited the uppermost performance in photosynthetic pigments under both salinity levels. Additionally, the Ismailia line was superior in the activity of superoxide dismutase (SOD), catalase activity (CAT), peroxidase (POX), and polyphenol oxidase (PPO) enzymes followed by Misr 1. Moreover, the Ismailia line recorded the maximum anatomical root and leaf measurements under salinity stress, which enhanced its tolerance to salinity stress. The Ismailia line and Misr 3 presented high up-regulation of H+ATPase, NHX2 HAK, and HKT genes in the root and leaf under both salinity levels. The positive physiological, anatomical, and molecular responses of the Ismailia line under salinity stress were reflected on agronomic performance and exhibited superior values of all evaluated agronomic traits.

Drought is one of the major environmental stresses that devastatingly impact squash development, growth, and productivity. Potassium silicate can attenuate the injuries caused by water stress. Hence, this study was designed to investigate the influence of three concentrations of potassium silicate; 10, 15, and 20 g/L on squash plants versus untreated control under three irrigation regimes; 100, 75, and 50% of estimated crop evapotranspiration (ET). The obtained results indicated that moderate (75% ET) or severe (50% ET) drought stress conditions gradually declined photosynthetic pigments, relative water content (RWC), mineral content, physiological parameters, and anatomical characteristics. These deleterious impacts were reflected on all growth and yield traits, i.e., plant height, fresh and dry weight of root and shoot, and fruit yield. On the other hand, the antioxidant enzyme activities; superoxide dismutase (SOD), catalase (CAT), and peroxidase (POX) significantly increased under severe drought stress at 50% ET followed by 75% ET. However, all evaluated exogenous applications of potassium silicate substantially enhanced photosynthetic pigments, RWC, N, P, and K content, antioxidant enzyme activities, and anatomical characters (periderm thickness, cortex thickness, midrib thickness, mesophyll thickness, number of xylem vessels per main vascular bundle, thickness of vascular bundle, thickness of collenchymatous tissue and upper epidermis, and thickness of collenchymatous tissue and lower epidermis). These desirable impacts were reflected in enhancing all growth and yield parameters. Conclusively, this study alludes that the exogenously applied of potassium silicate, particularly at 20 g/L, can alleviate the deleterious effects of drought stress and enhance the growth and productivity of squash plants, especially in arid environments.

Chia (Salvia hispanica L.) is a specialty crop capable of providing healthy food and metabolites. The goal of our study was to explore the possibility of expanding seed yield, oil production, and metabolites of chia in response to amino acid, barthenosteriode, and algae extract treatments used as bio-stimulants. The experiment was conducted in the field in a randomized complete block design with three repeats. The treatments were (1) control (spray only with water), (2) amino acids with nutrients (2 mL/L vs. 4 mL/L), (3) brassinolide (5 mL/L vs. 10 mL/L), and algae extract (2 mL/L vs. 4 mL/L). The growth and yield measurements of chia, such as chlorophyll, carotenoids, amino acids, indoles, phenols, macro- and micronutrients, carbohydrates, total oil, and fatty acids were analyzed. The chia plants sprayed with growth stimulant materials showed increases in most studied characteristics, particularly algae extract at 4 mL/L, followed by algae extract at 2 mL/L during the first and second seasons. Meanwhile, amino acids at 4 mL/L led to the third-highest increases in most cases. Conversely, all bio-stimulant treatments decreased total phenols in leaves (mg/100 g f.w.), especially seaweed at 4 mL/L, compared to high levels in the control during both seasons. Control plants showed the lowest levels of the measurements mentioned previously when scored by barthenosteriode at 5 mL/L during the first and second seasons. GLC for fixed oil in chia showed the recognition of four biocomponents. i.e., oleic, linoleic, palmitic, and α-α linolenic acids. The main biocomponent was α-α linolenic acid and reach (49.7 to 57.9%). The application of seaweed at 4 mL/L could be exploited to improve growth, seed crop, fixed oil production, chemicals and bio-constituents, especially the fixed oil composition of chia (Salvia hispanica L.) plant.

The harmful impacts of ozone (O3) on plant development and productivity have been excessively studied. Furthermore, the positive influences of its low concentrations still need to be explored further. The present study was performed to assess the impact of low concentrations of O3 on two sweet pepper hybrids under cold stress. The ozonated water was utilized for seed soaking or foliar application at concentrations of 0, 10, 20, 30, and 40 ppm. Seed soaking using ozonated water for 1 h was compared to soaking in distilled water as a control. Moreover, exogenously ozonated water was sprayed thrice at three-day intervals compared with untreated control. The differences between the applied methods (seed soaking and foliar application using ozonated water) were not statistically detected in most of the evaluated parameters. On the other hand, the evaluated hybrids displayed significant differences in the studied parameters, with the superiority of the Lirica evident in most germination and seedling growth parameters. Both applied methods significantly improved germination and seedling growth parameters. In particular, the concentration of 40 ppm displayed the highest enhancement of the germination index, coefficient velocity, and seedling quality. In addition, it promoted the seedling maintenance of high relative water content (RWC), chlorophyll, proline, and ascorbate peroxidase activity under cold stress conditions. Moreover, it protected the cell wall from damage by decreasing membrane permeability (MP). Generally, the best results were obtained from 40 ppm followed by 30 ppm of O3 as seed soaking or foliar spray. The results pointed out the possible use of O3 in a low concentration to protect the plants from cold stress during germination and early plant growth.

Tomatoes are an important agricultural product because they contain high concentrations of bioactive substances, such as folate, ascorbate, polyphenols, and carotenoids, as well as many other essential elements. As a result, tomatoes are thought to be extremely beneficial to human health. Chemical fertilizers and insecticides are routinely utilized to maximize tomato production. In this context, microbial inoculations, particularly those containing PGPR, may be utilized in place of chemical fertilizers and pesticides. In this study, we investigated the effects of PGPR (Bacillus subtilis, and Bacillus amyloliquefaciens) and cyanobacteria when utilized alone, and in conjunction with each other, on the growth, quality, and yield of fresh fruits of tomato plants. The results showed that the inoculation significantly increased all measured parameters of tomato plants compared with the control. Combined use of B. subtilis and B. amyloliquefaciens had a positive impact on tomato yield, increasing fruit yield. Moreover, leaflet anatomical characteristics were altered, with increased thickness of the upper epidermis, lower epidermis, palisade tissue, spongy tissue, and vascular bundles. Tomato fruit quality was improved, as measured by an increased number of fruit per plant (76% increase), fruit weight (g; 33% increase), fruit height (cm; 50% increase), fruit diameter (cm; 50%), total soluble solids (TSS; 26% increase), and ascorbic acid (mg/100 g F.W.; 75% increase), relative to the control, in the first season. In addition, fruit chemical contents (N, P, and K) were increased with inoculation. The results suggest that inoculation with B. subtilis and B. amyloliquefaciens could be successfully used to enhance tomato plant growth and yield.

Drought is one of the major environmental stresses that devastatingly impact squash development, growth, and productivity. Potassium silicate can attenuate the injuries caused by water stress. Hence, this study was designed to investigate the influence of three concentrations of potassium silicate; 10, 15, and 20 g/L on squash plants versus untreated control under three irrigation regimes; 100, 75, and 50% of estimated crop evapotranspiration (ET). The obtained results indicated that moderate (75% ET) or severe (50% ET) drought stress conditions gradually declined photosynthetic pigments, relative water content (RWC), mineral content, physiological parameters, and anatomical characteristics. These deleterious impacts were reflected on all growth and yield traits, i.e., plant height, fresh and dry weight of root and shoot, and fruit yield. On the other hand, the antioxidant enzyme activities; superoxide dismutase (SOD), catalase (CAT), and peroxidase (POX) significantly increased under severe drought stress at 50% ET followed by 75% ET. However, all evaluated exogenous applications of potassium silicate substantially enhanced photosynthetic pigments, RWC, N, P, and K content, antioxidant enzyme activities, and anatomical characters (periderm thickness, cortex thickness, midrib thickness, mesophyll thickness, number of xylem vessels per main vascular bundle, thickness of vascular bundle, thickness of collenchymatous tissue and upper epidermis, and thickness of collenchymatous tissue and lower epidermis). These desirable impacts were reflected in enhancing all growth and yield parameters. Conclusively, this study alludes that the exogenously applied of potassium silicate, particularly at 20 g/L, can alleviate the deleterious effects of drought stress and enhance the growth and productivity of squash plants, especially in arid environments.

For the past two decades, cellular senescence has been recognized as a central component of the tumor cell response to chemotherapy and radiation. Traditionally, this form of senescence, termed Therapy-Induced Senescence (TIS), was linked to extensive nuclear damage precipitated by classical genotoxic chemotherapy. However, a number of other forms of therapy have also been shown to induce senescence in tumor cells independently of direct genomic damage. This review attempts to provide a comprehensive summary of both conventional and targeted anticancer therapeutics that have been shown to induce senescence in vitro and in vivo. Still, the utility of promoting senescence as a therapeutic endpoint remains under debate. Since senescence represents a durable form of growth arrest, it might be argued that senescence is a desirable outcome of cancer therapy. However, accumulating evidence suggesting that cells have the capacity to escape from TIS would support an alternative conclusion, that senescence provides an avenue whereby tumor cells can evade the potentially lethal action of anticancer drugs, allowing the cells to enter a temporary state of dormancy that eventually facilitates disease recurrence, often in a more aggressive state. Furthermore, TIS is now strongly connected to tumor cell remodeling, potentially to tumor dormancy, acquiring more ominous malignant phenotypes and accounts for several untoward adverse effects of cancer therapy. Here, we argue that senescence represents a barrier to effective anticancer treatment, and discuss the emerging efforts to identify and exploit agents with senolytic properties as a strategy for elimination of the persistent residual surviving tumor cell population, with the goal of mitigating the tumor-promoting influence of the senescent cells and to thereby reduce the likelihood of cancer relapse.

Denture base fabrication has advanced with the introduction of computer-aided design and manufacturing (CAD-CAM) techniques, such as subtractive milling and additive 3D printing. However, concerns persist regarding the mechanical performance of 3D-printed denture bases. This systematic review and meta-analysis aimed to evaluate and compare the flexural strength (FS), surface hardness, fracture toughness, and impact strength of 3D-printed denture bases with those produced by milling and conventional methods. A systematic search of PubMed, Scopus, Web of Science, and Cochrane Central was conducted up to March 2025 in accordance with Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. In vitro studies comparing 3D-printed denture bases with milled or conventional heat-polymerized bases in terms of mechanical properties were included. The Joanna Briggs Institute (JBI) checklist for quasi-experimental studies was used. Data was extracted, and quantitative synthesis was performed where possible. Thirty-eight studies were included, comprising 562 specimens for FS and 231 for surface hardness. Meta-analysis revealed that milled denture bases demonstrated the highest flexural strength (MD = -1.11, 95% CI [-1.29, -0.93], p  < 0.001) and surface hardness (MD = -26.49, 95% CI [-29.89, -23.10], p  < 0.001) compared to 3D-printed bases. Conventional bases outperformed 3D-printed ones in most mechanical properties. Milled denture bases exhibited the highest FS (120–146 MPa), followed by conventional PMMA (95–119 MPa), while 3D-printed bases showed wider variability (28–128 MPa). Surface hardness (VHN), fracture toughness (MPa·m¹/²), and impact strength (kJ/m²) were also superior in milled bases. Statistical heterogeneity was present due to differences in materials, printing orientation, and post-curing protocols. Subgroup analysis based on printing orientation (0°, 45°, and 90°) partially explained this variability, showing higher FS in horizontally printed specimens. Although 3D-printed denture bases offer customization and production efficiency, their mechanical properties remain inferior to milled alternatives. Optimization of resin formulations, printing parameters, and post-processing protocols is essential to enhance their clinical performance. The main limitations were high heterogeneity among included studies, differences in material formulations, variability in testing standards, and the in vitro nature of most included studies. This review was registered in PROSPERO (CRD420250639092). There were no deviations from the registered protocol.