Explore the vast range of titles available.

This paper proposes two solutions based on angle diversity receivers (ADRs) to mitigate inter-cell interference (ICI) in underground mining visible light communication (VLC) systems, one of them is a novel approach. A realistic VLC system based on two underground mining scenarios, termed as mining roadway and mine working face, is developed and modeled. A channel model based on the direct component in line-of-sight (LoS) and reflections of non-line-of-sight (NLoS) links is considered, as well as thermal and shot noises. The design and mathematical models of a pyramid distribution and a new hemi-dodecahedral distribution are addressed in detail. The performances of these approaches, accompanied by signal combining schemes, are evaluated with the baseline of a single photo-diode in reception. Results show that the minimum lighting standards established in both scenarios are met. As expected, the root-mean-square delay spread decreases as the distance between the transmitters and receivers increases. Furthermore, the hemi-dodecahedron ADR in conjunction with the maximum ratio combining (MRC) scheme, presents the best performance in the evaluated VLC system, with a maximum user data rate of 250 Mbps in mining roadway and 120 Mbps in mine working face, received energy per bit/noise power of 32 dB and 23 dB, respectively, when the bit error rate corresponds to 10 − 4 , and finally, values of 120 dB in mining roadway and 118 dB in mine working face for signal-to-interference-plus-noise ratio are observed in a cumulative distribution function.

Visiblelightcommunication (VLC) is an emerging technology that offers an alternative to traditional wireless communications systems. However, the technology presents limitations related to the impact of the receiver’s orientation, which can significantly impact its performance. To address this issue, VLC systems use diversity schemes, such as transmitter and receiver diversity. In this paper, we derive an analytical expression for the probability of maintaining a line-of-sight (LoS) link in an underground mining visible light communication (UM-VLC) system with a receiver embedded in an object, such as a helmet, by considering user mobility. We show that the angle of incidence depends on the distance from the source and derive the probability accordingly for single-input single-output (SISO), multiple-input single-output (MISO), and single-input multiple-output cases (SIMO). Our results show that the analytical results fit with the simulated results. Furthermore, the resulting probabilities show that the angular position of the receiver significantly affects the channel’s quality, with the optimal position dependent on the field-of-view characteristics. These findings can provide an appropriate framework for receiver and transmitter diversity design through analytical expression.

In this manuscript we propose a hybrid Visible Light Communication and Radio Frequency (VLC-RF) scheme for the implementation of a portable Phaser Measurement Unit (PMU) for deep underground tunnels. Through computer simulations and laboratory measurements we are capable of providing Coordinated Universal Time (UTC) to the PMUs, as well as high accuracy positioning in a Global Positioning System (GPS) denied environment. The estimated PMU position, time stamp, and electrical power system measurements are sent to a central monitoring station using a radio frequency uplink with a data rate of hundreds of Kbps. Simulations and experimental measurements show that the proposed scheme can be used to control a large number of VLC-RF PMU devices inside a tunnel. The tests demonstrate the viability of the hybrid prototype, which will improve performance compared to commercial PMUs that lack these features.

This paper presents the design, implementation, and experimental evaluation of a visible light communication (VLC) system using a small solar panel with a custom signal-conditioning circuit as an optical receiver in a greenhouse environment. In this context, VLC can enables simultaneous lighting and data transmission, while solar panels can serve dual roles as energy harvesters and receivers. The work focuses on using mini solar panels, coupled with tailored circuitry, to address practical challenges in greenhouse communication. Theoretical modeling includes Lambertian emission and Beer–Lambert attenuation to characterize the optical channel, while accounting for the solar panel’s inherent low-pass filtering, which limits frequency response. Key performance metrics, including received optical power, bit error ratio (BER), and communication range, were evaluated under varying humidity conditions and at different transmitter-receiver distances. Experimental results using a modulated LED source showed that under high-humidity greenhouse conditions, the system achieves BER only at short ranges ( 0.3-0.4 m), increasing to - for 0.55-0.70 m. Beyond this range, link performance degrades due to receiver sensitivity limits. For reference, comparisons with reported photodetector results under similar greenhouse conditions highlighted that solar panels, while less sensitive at long distances, remain a viable option for robust, low-data-rate VLC applications. These findings offer insights into the design of photovoltaic-based VLC systems, highlighting opportunities to enhance receiver sensitivity and optimize dual-purpose operation.

Localization in hospitals can be valuable in improving different services in medical environments. In this sense, an accurate location system in this environment requires adequately enabling communication technology. However, widely adopted technologies such as Wireless Fidelity (WiFi), Bluetooth, and Radio Frequency Identification (RFID) are considered poorly suited to enable hospital localization due to their inherent drawbacks, including high implementation costs, poor signal strength, imprecise estimates, and potential interference with medical devices. The increasing expenses associated with the implementation and maintenance of these technologies, along with their limited accuracy in dynamic hospital environments, underscore the pressing need for alternative solutions. In this context, it becomes imperative to explore and present novel approaches that not only avoid these challenges but also offer more cost effective, accurate, and interference-resistant connectivity to achieve precise localization within the complex and sensitive hospital environment. In the quest to achieve adequate localization accuracy, this article strategically focuses on leveraging Visible Light Communication (VLC) as a fundamental technology to address the specific demands of hospital environments to achieve the precise localization and tracking of life-saving equipment. The proposed system leverages existing lighting infrastructure and utilizes three transmitting LEDs with different wavelengths. The Received Signal Strength (RSS) is used at the receiver, and a trilateration algorithm is employed to determine the distances between the receiver and each LED to achieve precise localization. The accuracy of the localization is further enhanced by integrating a trilateration algorithm with the sophisticated Particle Swarm Optimization (PSO) algorithm. The proposed method improves the localization accuracy, for example, at a height of 1 m, from a 11.7 cm error without PSO to 0.5 cm with the PSO algorithm. This enhanced accuracy is very important to meet the need for precise equipment location in dynamic and challenging hospital environments to meet the demand for life-saving equipment. Furthermore, the performance of the proposed localization algorithm is compared with conventional positioning methods, which denotes improvements in terms of the localization error and position estimation.

This study investigates the impact of wall roughness on the performance of the Non-Line-of-Sight (NLOS) component in Visible Light Communication (VLC) systems designed for underground mining environments, adhering to safety and communication standards such as IEC 60079-28(intrinsic safety in explosive atmospheres) and IEEE 802.15.7 (VLC parameters). Using probabilistic models aligned with the ITU-R P.1238 propagation guidelines, the research evaluates how wall materials (e.g., coal, shale, limestone) and their irregular geometries, characterized by surface roughness profiles compliant with ISO 8503-2,influence reflection coefficients (0.05–0.85 range), incidence angles (0°–90°), and irradiance angles (5°–180°), which are critical for signal propagation. Simulation scenarios, parameterized with material reflectivity data from ASTM E423, explore the effects of statistical distributions (uniform, normal with μ = 0.3, σ = 0.2; exponential λ = 2; gamma α = 0.5, β = 0.2) on power distribution, channel impulse response, and reflection coefficients. The results indicate variations in maximum received power: a decrease of 80% for uniform distribution, an increase of 150% for exponential distribution, and a 100% increase for gamma distribution in reflection conditions. Under incidence and irradiance conditions, uniform distribution exhibited a 158.62% increase, whereas exponential distribution and gamma distribution experienced reductions of 72.22% and 7.04%, respectively. These variations align with IEC 62973-1 EMI limits and emphasize the role of roughness (Ra = 0.8–12.5 μm per ASME B46.1).

Underground Mining (UM) is a hostile industry that generally requires a wireless communication system as a cross-cutting axis for its optimal operation. Therefore, in the last five years, it has been shown that, in addition to radio-frequency-based communication links, wireless optical communications, such as Visible Light Communication (VLC), can be applied to UM environments. The application of VLC systems in underground mines, known as UM-VLC, must take into account the unique physical features of underground mines. Among the physical phenomena found in underground mines, the most important ones are the positioning of optical transmitters and receivers, irregular walls, shadowing, and a typical phenomenon found in tunnels known as scattering, which is caused by the atmosphere and dust particles. Consequently, it is necessary to use proper dust particle distribution models consistent with these scenarios to describe the scattering phenomenon in a coherent way in order to design realistic UM-VLC systems with better performance. Therefore, in this article, we present an in-depth study of the interaction of optical links with dust particles suspended in the UM environment and the atmosphere. In addition, we analytically derived a hemispherical 3D dust particle distribution model, along with its main statistical parameters. This analysis allows to develop a more realistic scattering channel component and presents an enhanced UM-VLC channel model. The performance of the proposed UM-VLC system is evaluated using computational numerical simulations following the IEEE 802.1.5.7 standard in terms of Channel Impulse Response (CIR), received power, Signal-to-Noise-Ratio (SNR), Root Mean Square (RMS) delay spread, and Bit Error Rate (BER). The results demonstrate that the hemispherical dust particle distribution model is more accurate and realistic in terms of the metrics evaluated compared to other models found in the literature. Furthermore, the performance of the UM-VLC system is negatively affected when the number of dust particles suspended in the environment increases.

Assessment of human behavior during performance of daily routine actions at indoor areas plays a significant role in healthcare services and smart homes for elderly and disabled people. During this consideration, initially, depth images are captured using depth camera and segment human silhouettes due to color and intensity variation. Features considered spatiotemporal properties and obtained from the human body color joints and depth silhouettes information. Joint displacement and specific-motion features are obtained from human body color joints and side-frame differentiation features are processed based on depth data to improve classification performance. Lastly, recognizer engine is used to recognize different activities. Unlike conventional results that were evaluated using a single dataset, our experimental results have shown state-of-the-art accuracy of 88.9% and 66.70% over two challenging depth datasets. The proposed system should be serviceable with major contributions in different consumer application systems such as smart homes, video surveillance and health monitoring systems.

This article proposes a novel method for detecting coronavirus disease 2019 (COVID-19) in an underground channel using visible light communication (VLC) and machine learning (ML). We present mathematical models of COVID-19 Deoxyribose Nucleic Acid (DNA) gene transfer in regular square constellations using a CSK/QAM-based VLC system. ML algorithms are used to classify the bands present in each electrophoresis sample according to whether the band corresponds to a positive, negative, or ladder sample during the search for the optimal model. Complexity studies reveal that the square constellation N=22i×22i,(i=3) yields a greater profit. Performance studies indicate that, for BER = 10−3, there are gains of −10 [dB], −3 [dB], 3 [dB], and 5 [dB] for N=22i×22i,(i=0,1,2,3), respectively. Based on a total of 630 COVID-19 samples, the best model is shown to be XGBoots, which demonstrated an accuracy of 96.03%, greater than that of the other models, and a recall of 99% for positive values.

Reliable wireless communications are crucial for ensuring workers’ safety in underground tunnels and mines. Visible light communications (VLC) have been proposed as auxiliary systems for short-range wireless communications in underground environments due to their seamless availability, immunity to electromagnetic interference, and illumination capabilities. Although multiple VLC channel models have been proposed for underground mines (UM) so far, none of these models have considered the wavelength dependence of the underground mining VLC channel (UM-VLC). In this paper, we propose a single-input, single-output (SISO), wavelength-dependent UM-VLC channel model considering the wavelength dependence of the light source, reflections, light scattering, and the attenuation due to dust and the photodetector. Since wavelength dependence allows us to model VLC systems more accurately with color-based modulation, such as color-shift keying (CSK), we also propose a wavelength-dependent CSK-based UM-VLC channel model. We define a simulation scenario in an underground mine roadway and calculate the received power, channel impulse response (CIR), signal-to-noise ratio (SNR), signal-to-interference ratio (SIR), root mean square (RMS) delay, and bit error rate (BER). For comparison, we also calculate these parameters for a monochromatic state-of-the-art UM-VLC channel and use it as a reference channel. We find that the inclusion of wavelength-dependency in CSK-based UM-VLC systems plays a significant role in their performance, introducing color distortion that the color calibration algorithm defined in the IEEE 802.15.7 VLC standard finds harder to revert than the linear color distortion induced by monochromatic CSK channels.