Explore the vast range of titles available.

This study reports the use of Genotyping-by-Sequencing (GBS) for large-scale SNP discovery and simultaneous genotyping of recombinant inbred lines (RILs) of an intra-specific mapping population of chickpea contrasting for seed traits. A total of 119,672 raw SNPs were discovered, which after stringent filtering revealed 3,977 high quality SNPs of which 39.5% were present in genic regions. Comparative analysis using physically mapped marker loci revealed a higher degree of synteny with Medicago in comparison to soybean. The SNP genotyping data was utilized to construct one of the most saturated intra-specific genetic linkage maps of chickpea having 3,363 mapped positions including 3,228 SNPs on 8 linkage groups spanning 1006.98 cM at an average inter marker distance of 0.33 cM. The map was utilized to identify 20 quantitative trait loci (QTLs) associated with seed traits accounting for phenotypic variations ranging from 9.97% to 29.71%. Analysis of the genomic sequence corresponding to five robust QTLs led to the identification of 684 putative candidate genes whose expression profiling revealed that 101 genes exhibited seed specific expression. The integrated approach utilizing the identified QTLs along with the available genome and transcriptome could serve as a platform for candidate gene identification for molecular breeding of chickpea.

The CCCH zinc finger is a group of proteins characterised by a typical motif consisting of three cysteine residues and one histidine residue. These proteins have been reported to play important roles in regulation of plant growth, developmental processes and environmental responses. In the present study, genome wide analysis of the CCCH zinc finger gene family was carried out in the available chickpea genome. Various bioinformatics tools were employed to predict 58 CCCH zinc finger genes in chickpea (designated CarC3H1-58), which were analysed for their physio-chemical properties. Phylogenetic analysis classified the proteins into 12 groups in which members of a particular group had similar structural organization. Further, the numbers as well as the types of CCCH motifs present in the CarC3H proteins were compared with those from Arabidopsis and Medicago truncatula. Synteny analysis revealed valuable information regarding the evolution of this gene family. Tandem and segmental duplication events were identified and their Ka/Ks values revealed that the CarC3H gene family in chickpea had undergone purifying selection. Digital, as well as real time qRT-PCR expression analysis was performed which helped in identification of several CarC3H members that expressed preferentially in specific chickpea tissues as well as during abiotic stresses (desiccation, cold, salinity). Moreover, molecular characterization of an important member CarC3H45 was carried out. This study provides comprehensive genomic information about the important CCCH zinc finger gene family in chickpea. The identified tissue specific and abiotic stress specific CCCH genes could be potential candidates for further characterization to delineate their functional roles in development and stress.

Legumes develop root nodules in which bacteria fix nitrogen for plants. The phytohormones auxin and cytokinin regulate nodule organogenesis by recruiting various genes to effect symbiosis. Moreover, these genes are regulated by the action of microRNAs also. To understand the complex regulatory network involving miRNAs in response to phytohormones and rhizobial interactions in chickpea roots, a miRNA expression profiling was performed. Indole acetic acid and 6-benzylaminopurine at concentrations of 0.1, 1 and 10 µM were used for auxin and cytokinin exogenous treatment and Mesorhizobium ciceri to study rhizobial interaction with chickpea root. Expression profiling of a set of 11 miRNAs was performed. Further, the targets of the candidate miRNAs were identified, followed by functional annotation. This analysis revealed that cat-miR160, cat-miR164, cat-miR396 and cat-miR398 were responsive to auxin and cytokinin. cat-miR319 was found to be only auxin responsive and is known to regulate auxin signalling by targeting TEOSINTE BRANCHED/CYCLOIDEA/PCF (TCP) which interacts with auxin inducible genes. Further, cytokinin elicited a response at very low concentration of 0.1 µM, and most of the miRNAs investigated were responsive to cytokinin. Interactome analysis revealed that cat-miR164 and cat-miR168 work in conjunction to regulate auxin signalling. Interestingly, cat-miR169 and cat-miR482 were low expressing during auxin treatment and M. ciceri infection but their expression spiked during cytokinin treatment, indicating a cytokinin mediated mode of action. The miRNA expression profiling in response to phytohormones and rhizobia and the reported function of their target genes suggested a crosstalk among the phytohormonal responses during chickpea nodulation.

Multiple studies have attempted to dissect the molecular mechanism underlying seed development in chickpea (Cicer arietinum L.). These studies highlight the need to focus on the role of miRNAs in regulating storage protein accumulation in seeds. Therefore, a total of 8,856,691 short-read sequences were generated from a small RNA library of developing chickpea seeds and were analyzed using miRDeep-P to identify 74 known and 26 novel miRNA sequences. Known miRNAs were classified into 22 miRNA families with miRNA156 family being most abundant. Of the 26 putative novel miRNAs identified, only 22 could be experimentally validated using stem loop end point PCR. Differential expression analyses led to the identification of known as well as novel miRNAs that could regulate various stages of chickpea seed development. In silico target prediction revealed several important target genes and transcription factors like SPL, mediator of RNA Polymerase II transcription subunit 12, aspartic proteinase and NACs, which were further validated by real-time PCR analysis. A comparative expression analysis in chickpea genotypes with contrasting seed protein content revealed one known (Car-miR156h) and two novel miRNA (Car-novmiR7 and Car-novmiR23) candidates to be highly expressed in the LPC (low protein content) chickpea genotypes, targets of which are known to regulate seed storage protein accumulation. Therefore, this study provides a useful resource in the form of miRNA and their targets which can be further utilized to understand and manipulate various regulatory mechanisms involved in seed development with the overall aim of improving yield and nutrition attributes in chickpea.

A hallmark trait of chickpea (Cicer arietinum L.), like other legumes, is the capability to convert atmospheric nitrogen (N2) into ammonia (NH3) in symbiotic association with Mesorhizobium ciceri. However, the complexity of molecular networks associated with the dynamics of nodule development in chickpea need to be analyzed in depth. Hence, in order to gain insights into the chickpea nodule development, the transcriptomes of nodules at early, middle and late stages of development were sequenced using the Roche 454 platform. This generated 490.84 Mb sequence data comprising 1,360,251 reads which were assembled into 83,405 unigenes. Transcripts were annotated using Gene Ontology (GO), Cluster of Orthologous Groups (COG) and Kyoto Encyclopedia of Genes and Genomes (KEGG) metabolic pathways analysis. Differential expression analysis revealed that a total of 3760 transcripts were differentially expressed in at least one of three stages, whereas 935, 117 and 2707 transcripts were found to be differentially expressed in the early, middle and late stages of nodule development respectively. MapMan analysis revealed enrichment of metabolic pathways such as transport, protein synthesis, signaling and carbohydrate metabolism during root nodulation. Transcription factors were predicted and analyzed for their differential expression during nodule development. Putative nodule specific transcripts were identified and enriched for GO categories using BiNGO which revealed many categories to be enriched during nodule development, including transcription regulators and transporters. Further, the assembled transcriptome was also used to mine for genic SSR markers. In conclusion, this study will help in enriching the transcriptomic resources implicated in understanding of root nodulation events in chickpea.

Despite chickpea being the third important grain legume, there is a limited availability of genomic resources, especially of the expressed sequence tag (EST)-based markers. In this study, we generated 822 chickpea ESTs from immature seeds as well as exploited 1,309 ESTs from the chickpea database, thus utilizing a total of 2,131 EST sequences for development of functional EST-SSR markers. Two hundred and forty-six simple sequence repeat (SSR) motifs were identified from which 183 primer pairs were designed and 60 validated as functional markers. Genetic diversity analysis across 30 chickpea accessions revealed ten markers to be polymorphic producing a total of 29 alleles and an observed heterozygosity average of 0.16 thereby exhibiting low levels of intra-specific polymorphism. However, the markers exhibited high cross-species transferability ranging from 68.3 to 96.6% across the six annual Cicer species and from 29.4 to 61.7% across the seven legume genera. Sequence analysis of size variant amplicons from various species revealed that size polymorphism was due to multiple events such as copy number variation, point mutations and insertions/deletions in the microsatellite repeat as well as in the flanking regions. Interestingly, a wide prevalence of crossability-group-specific sequence variations were observed among Cicer species that were phylogenetically informative. The neighbor joining dendrogram clearly separated the chickpea cultivars from the wild Cicer and validated the proximity of C. judaicum with C. pinnatifidum. Hence, this study for the first time provides an insight into the distribution of SSRs in the chickpea transcribed regions and also demonstrates the development and utilization of genic-SSRs. In addition to proving their suitability for genetic diversity analysis, their high rates of transferability also proved their potential for comparative genomic studies and for following gene introgressions and evolution in wild species, which constitute the valuable secondary genepool in chickpea.

Chickpea ( Cicer arietinum L.) is an important pulse legume crop. We previously reported a draft genome assembly of the desi chickpea cultivar ICC 4958. Here we report an advanced version of the ICC 4958 genome assembly (version 2.0) generated using additional sequence data and an improved genetic map. This resulted in 2.7-fold increase in the length of the pseudomolecules and substantial reduction of sequence gaps. The genome assembly covered more than 94% of the estimated gene space and predicted the presence of 30,257 protein-coding genes including 2230 and 133 genes encoding potential transcription factors (TF) and resistance gene homologs, respectively. Gene expression analysis identified several TF and chickpea-specific genes with tissue-specific expression and displayed functional diversification of the paralogous genes. Pairwise comparison of pseudomolecules in the desi (ICC 4958) and the earlier reported kabuli (CDC Frontier) chickpea assemblies showed an extensive local collinearity with incongruity in the placement of large sequence blocks along the linkage groups, apparently due to use of different genetic maps. Single nucleotide polymorphism (SNP)-based mining of intra-specific polymorphism identified more than four thousand SNPs differentiating a desi group and a kabuli group of chickpea genotypes.

Eukaryotic genomes show an intricate three-dimensional (3D) organization within the nucleus that regulates multiple biological processes including gene expression. Contrary to animals, understanding of 3D genome organization in plants remains at a nascent stage. Here, we investigate the evolution of 3D chromatin architecture in legumes. By using cutting-edge PacBio, Illumina, and Hi-C contact reads, we report a gap-free, chromosome-scale reference genome assembly of Vigna mungo , an important minor legume cultivated in Southeast Asia. We spatially resolved V. mungo chromosomes into euchromatic, transcriptionally active A compartment and heterochromatic, transcriptionally-dormant B compartment. We report the presence of TAD-like-regions throughout the diagonal of the HiC matrix that resembled transcriptional quiescent centers based on their genomic and epigenomic features. We observed high syntenic breakpoints but also high coverage of syntenic sequences and conserved blocks in boundary regions than in the TAD-like region domains. Our findings present unprecedented evolutionary insights into spatial 3D genome organization and epigenetic patterns and their interaction within the V. mungo genome. This will aid future genomics and epigenomics research and breeding programs of V. mungo .

Genotyping-by-sequencing (GBS) allows rapid identification of markers for use in development of linkage maps, which expedite efficient breeding programs. In the present study, we have utilized GBS approach to identify and genotype single-nucleotide polymorphism (SNP) markers in an inter-specific RIL population of Cicer arietinum L. X C. reticulatum. A total of 141,639 raw SNPs were identified using the TASSEL-GBS pipeline. After stringent filtering, 8208 candidate SNPs were identified of which ~ 37% were localized in the intragenic regions followed by genic regions (~ 30%) and intergenic regions (~ 27%). We then utilized 6920 stringent selected SNPs from present study and 6714 SNPs and microsatellite markers available from previous studies for construction of linkage map. The resulting high-density linkage map comprising of eight linkage groups contained 13,590 markers which spanned 1299.14 cM of map length with an average marker density of 0.095 cM. Further, the derived linkage map was used to improve the available assembly of desi chickpea genome by anchoring 443 previously unplaced scaffolds onto eight linkage groups. The present efforts have refined anchoring of the desi chickpea genome assembly to 55.57% of the ~ 520 Mb of assembled desi genome. To the best of our knowledge, the linkage map generated in the present study represents one of the most dense linkage map developed for the crop till date. It will serve as a valuable resource for fine mapping and positional cloning of important quantitative trait loci (QTLs) associated with agronomical traits and also for anchoring and ordering of future genome sequence assemblies.

Seed weight and seed size both are quantitative traits and have been considered as important components of grain yield, thus identification of quantitative trait loci (QTL) for seed traits in lentil (Lens culinaris) would be beneficial for the improvement of grain yield. Hence the main objective of this study was to identify QTLs for seed traits using an intraspecific mapping population derived from a cross between L. culinaris cv. Precoz (seed weight-5.1g, seed size-5.7mm) and L. culinaris cv. L830 (seed weight-2.2g, seed size-4mm) comprising 126 F8-RILs. For this, two microsatellite genomic libraries enriched for (GA/CT) and (GAA/CTT) motif were constructed which resulted in the development of 501 new genomic SSR markers. Six hundred forty seven SSR markers (including 146 previously published) were screened for parental polymorphism and 219 (33.8%) were found to be polymorphic among the parents. Of these 216 were mapped on seven linkage groups at LOD4.0 spanning 1183.7cM with an average marker density of 5.48cM. Phenotypic data from the RILs was used to identify QTLs for the seed weight and seed size traits by single marker analysis (SMA) followed by composite interval mapping (CIM) which resulted in one QTL each for the 2 traits (qSW and qSS) that were co-localized on LG4 and explained 48.4% and 27.5% of phenotypic variance respectively. The current study would serve as a strong foundation for further validation and fine mapping for utilization in lentil breeding programs.