Explore the vast range of titles available.

Biochar is a promising material for phosphorus (P) removal from water, but its surface chemistry can limit adsorption efficiency. In this study, biochars produced at 440 °C and 880 °C from the same feedstock were functionalized post-pyrolysis using aqueous solutions of AlCl3, CaCl2, and FeCl3 at two concentrations (0.5 M and 2.0 M). The aim of this work was to assess how both pyrolysis temperature and post-pyrolysis activation with different metals affect the surface charge of biochar and its capacity to retain P from aqueous solution. The treated materials were characterized for pH, point of zero charge (pHpzc), and phosphorus retention from solution. Results showed that Al- and Fe-activation significantly reduced the biochar pH and shifted the pHpzc to more acidic values, enhancing electrostatic attraction toward phosphate species. Phosphorus adsorption was most effective for biochar obtained at 440 °C and treated with AlCl3 and FeCl3, achieving up to 10.2 mg P g−1. These findings highlight the importance of surface charge modulation in tuning biochar performance for phosphate removal from aqueous solution. Based on the obtained results, electrostatic attraction was the main mechanism by which activated biochar adsorbed P from aqueous solution.

Wastewater treatment plants (WWTPs) require an urgent transition from a linear to a circular economy operation/design concept with a consequent resource recovery and more sustainable waste management. Natural resources have to be preserved, and wastes have to become an opportunity for recovering resources and materials (water reuse, energy, sludge reuse). However, the transition toward a circular economy is a complex and long process due to the existence of technical, economic, social and regulatory barriers. These existing barriers are critical challenges for a modern and sustainable WWTP concept. The recovery of resources must be considered a strategic target from the earliest process-design phase. In this context, the European Union’s Horizon 2020 project “Achieving wider uptake of water-smart solutions—WIDER UPTAKE” aims to overcome the existing barriers (technological, regulatory, organizational, social and economic) toward the transition from a linear to a circular economy model for WWTPs. This study is aimed at increasing the awareness of the existing barriers to a circular economy and summarizes the key contributions of the WIDER UPTAKE project in terms of water reuse, sludge reuse and nutrient recovery.

The wastewater sector paradigm is shifting from wastewater treatment to resource recovery. In addition, concerns regarding sustainability during the operation have increased. In this sense, there is a need to break barriers (i.e., social, economic, technological, legal, etc.) for moving forward towards water resource recovery facilities and demonstration case studies can be very effective and insightful. This paper presents a new water resource recovery case study which is part of the Horizon 2020 EU Project “Achieving wider uptake of water-smart solutions—Wider Uptake”. The final aim is to demonstrate the importance of a resource recovery system based on the circular economy concept. The recovery facilities at Palermo University (Italy) are first presented. Afterwards, the resource recovery pilot plants are described. Preliminary results have underlined the great potential of the wastewater treatment plant in terms of resources recovery and the central role of the University in fostering the transition towards circular economy. The fermentation batch test highlighted a volatile fatty acids (VFAs) accumulation suitable for polyhydroxyalkanoates (PHAs) production. The results of static adsorption and desorption tests showed that the highest amount of adsorbed NH4+ was recorded for untreated and HCl-Na treated clinoptilolite.

Basidiomycetes can colonize sweet chestnut (Castanea sativa Mill) xylem, causing white or brown rot and losses in wood quality. The aim of this study was to assess the degradative potential of five Basidiomycota strains (Armillaria mellea (Vahl) P. Kumm. (Am), Fistulina hepatica (Shaeff.) With. (Fh), and Laetiporus sulphureus (Bull.) Murrill (Ls), and two strains of Ganoderma resinaceum Boud.) on three chestnut woods differing in chemistry. The woods differed in nitrogen content (0.3%–1.0%), carbon/nitrogen (C/N) ratio (43–150), and phenolic-related traits. In a 39-day laboratory assay, the five fungal strains were inoculated on three chestnut woods and compared for colonization time, extracellular enzymatic activity, and C mineralization. Fungal colonization strongly depended on fungus × wood interaction: L. sulphureus colonized all woods within 6 days, whereas the two G. resinaceum strains required 9–33 days depending on wood type; A. mellea and F. hepatica colonized only selected woods (up to 39 days). Enzymatic screening indicated laccase activity mainly in G. resinaceum (and to a lesser extent A. mellea), while L. sulphureus expressed cellulolytic activity but no laccase. Over 39 days, total C mineralization peaked under G. resinaceum on the two Sicilian woods (up to 270–300 mg CO2–C g−1 dry wood), whereas the Tuscan wood (highest C/N and phenolic content) markedly inhibited most strains; only L. sulphureus increased mineralization in this wood (85 mg CO2–C g−1 dry wood). These findings indicate that wood chemistry, especially C/N ratio and phenolic traits, strongly modulates strain-specific decay patterns. Overall, these results highlight the need for an integrated biological–biochemical approach to evaluate fungal decay potential and to inform both the selection of more durable chestnut woods for wood products and the identification of efficient strains to accelerate lignocellulosic biomass composting.

The widespread use of conventional plastic mulch films in agriculture contributes significantly to soil pollution due to their non-biodegradable nature. This study explores the potential of novel bio-based mulch films composed of chitosan, carboxymethyl cellulose, and sodium alginate, formulated in different ratios (1:1 and 17:3), with or without enrichment with monoammonium phosphate (MAP), to serve as biodegradable films with potential nutrient-releasing functionality as alternatives to conventional plastics. A multi-analytical approach, including elemental and isotopic analysis (EA-IRMS), biodegradation assays, and pyrolysis–gas chromatography–mass spectrometry (Py-GC-MS), was employed to assess their chemical properties, degradation behavior, and environmental compatibility. The results demonstrated that the 1:1 films, both with and without MAP, achieved over 90% biodegradation within 120 days under controlled soil conditions, in agreement with international criteria for soil biodegradability. In contrast, the 17:3 films showed reduced degradation, especially without MAP enrichment, highlighting the influence of polymer composition on microbial degradation. Isotopic tracing confirmed MAP integration and revealed composition-dependent fractionation effects. Py-GC-MS provided structural fingerprints of film components and putatively annotated nitrogen-containing compounds indicative of chitosan presence. Overall, these results demonstrate that the 1:1 films can be considered viable, multifunctional, and soil-friendly alternatives to conventional plastic mulches for sustainable agriculture.

Soil quality has been defined as the “continued capacity of soil to function as a vital living system, within ecosystem and land use boundaries, sustain biological productivity, promote the quality of air and water environments, and maintain plant, animal and human health” [...]

The current exploitation of freshwater, as well as the significant increase in sewage sludge production from wastewater treatment plants (WWTPs), represent nowadays a critical issue for the implementation of sustainable development consistent with the circular economy concept. There is an urgent need to rethink the concept of WWTPs from the conventional approach consisting in pollutant removal plants to water resource recovery facilities (WRRFs). The aim of this paper is to provide an overview of the demonstration case studies at the Marineo and Corleone WRRFs in Sicily (IT), with the final aim showing the effectiveness of the resources recovery systems, as well as the importance of plant optimization to reduce greenhouse gas (GHG) emissions from WRRFs. This study is part of the H2020 European Project “Achieving wider uptake of water-smart solutions—Wider-Uptake”, which final aim is to demonstrate the water-smart solution feasibility in the wastewater sector. The main project goal is to overcome the existing barriers that hamper the transition to circularity through the implementation of a governance analysis tool. The preliminary actions in the two demonstration cases are first presented, while, subsequently, the water-smart solutions to be implemented are thoroughly described, highlighting their roles in the transition process. The achieved preliminary results underlined the significant potential of WRRF application, a great chance to demonstrate the feasibility of innovative solutions in the wastewater sector to overcome the existing social, administrative and technical barriers.

Resource recovery from wastewater is very important in view of a circular economy approach in the water field. Among the different technologies applied to realize circular economy, an attractive option is the use of nutrient-enriched media that can be utilized as slow-release fertilizers. Zeolites have been re-discovered for their key role in ammonium (NH4+) adsorption from treated wastewater. Although many studies have been carried out to assess the ability of zeolites to adsorb NH4+, only few papers concerning NH4+ desorption from zeolites are available in the literature. Therefore, this study investigated NH4+ desorption from mineralogically different zeolites, before (ZNS and ZNC) and after (ZSS and ZSC) their treatment with sodium chloride. The zeolites differed in mordenite content. The amount of the desorbed NH4+ varied from 78 to 84% of the total NH4+ adsorbed. In particular, the NaCl-treated materials showed the largest desorption (27.6 ± 0.2 mg L−1, and 27.9 ± 0.7 mg L−1, ZSS, and ZSC, respectively) as compared to the untreated zeolites (22.9 ± 0.3 mg L−1, and 24.2 ± 0.3 mg L−1, ZNS, and ZNC, respectively) because of the different affinity of the cations for the zeolite surface. A monomodal pseudo-first-order model best approximated the desorption kinetics, suggesting only one mechanism of NH4+ desorption from zeolites. Such a mechanism is based on the ion exchange between dissolved Na+ and adsorbed NH4+. The desorption kinetics also showed that NH4+ desorbed slower from the NaCl-treated zeolites than the untreated ones. This effect was explained by the different affinity of Na+ and NH4+ for the zeolite surfaces as due to the diverse sizes of the Na+ and NH4+ hydration spheres. By revealing the effect of zeolite mineralogy and surface treatments in the desorption of NH4+, this study can suggest new and effective synthetic strategies for the achievement of cheap new materials to be applied in environmental remediation within a circular economy perspective.

The demand for water for civil and industrial use is diminishing the availability of such a valuable environmental resource for agricultural purposes. Thus, for the next generation, it is imperative to find alternative water sources for crop irrigation. The citrus agroindustry utilizes a large amount of water for processing fruit (e.g., essential oil extraction, fruit washing). Wastewaters produced by citrus industry (CWWs) are rich in organic matter and mineral nutrients, thus making them potentially usable for crop irrigation. Conversely, due to their high content of organic acids and low pH, they may increase the availability of soluble metals, in the form of both plant nutrients and contaminants. The aim of this study was to evaluate the effect of CWWs on the dynamics of soil water-soluble metals and pH. To this end, CWWs from the processing of lemons, oranges, and tangerines at three different doses were used. CWWs were analyzed to investigate type and amount of organic acids. Soil water-soluble metals (Na, Mg, Al, K, Ca, Fe, Co, Ni, Cu, Zn, and Cd) and pH were determined at days 1, 3, 7, 21, and 28 after the addition of CWWs. Citric, ascorbic, oxalic, tartaric, acetic, and malic acids were found in CWWs, with citric acid being two orders of magnitude more concentrated than the other acids. After the addition of CWWs, soil pH promptly decreased from 7.2 to at least 5.3 depending on the type and concentration of CWWs. Concurrently, the concentration of almost all investigated metals sharply increased within 7 days after the addition of CWWs. Then, it decreased, reaching values similar to that of the control. The increase in metals availability as a consequence of pH decrease was ascribed to different causes: the exchange reaction between H+ and cations adsorbed onto colloid surfaces, the addition of organic matter by CWWs that stimulated microbial activity, and the quantity and type of organic acids added via CWWs. In conclusion, the obtained results suggest that the use of citrus wastewater for irrigation purposes could be a valid solution, with them being rich in plant nutrients and easily mobilized elements such as Ca, Mg, K, and Na. Further research is needed to refine the understanding of the impact of CWWs in the long term and to develop targeted strategies for managing industrial wastewater in agriculture.

Essential oils (EOs), extracted from aromatic plants, have been proposed as candidates to develop natural herbicides. This study aimed to evaluate the herbicidal potential of Thymbra capitata (L.) Cav., Mentha × piperita L. and Santolina chamaecyparissus L. essential oils (EOs) on Avena fatua L., Echinochloa crus-galli (L.) P. Beauv, Portulaca oleracea L. and Amaranthus retroflexus L. and their effects on soil microorganisms. A pot experiment was set up and three EOs at three doses were applied by irrigation. Efficacy and effects of EOs on weed growth were determined. Soil microbial biomass carbon and nitrogen, microbial respiration, and the main microbial groups were determined at days 7, 28 and 56. EOs demonstrated herbicidal activity, increasing their toxicity with the dose. T. capitata was the most effective against all weeds at the maximum dose. P. oleracea was the most resistant weed. Soil microorganisms, after a transient upheaval period induced by the addition of EOs, recovered their initial function and biomass. T. capitata EO at the highest dose did not allow soil microorganisms to recover their initial functionality. EOs exhibited great potential as natural herbicides but the optimum dose of application must be identified to control weeds and not negatively affect soil microorganisms.