Explore the vast range of titles available.

Black seed has been applied for several decades to cure an extensive variety of illnesses and ailments. In this report, the chemical profile of both crude and ozonized black seed oil was assessed after the oil was exposed to 0 to 5 L/minute of ozone for four hours. The in vitro effects of black seed oil following being exposed to ozone including antimicrobial properties versus Bacillus cereus (ATCC11778), Staphylococcus aureus (ATCC6538), Escherichia coli (ATCC8739), Salmonella typhi (ATCC 6539), and Klebsiella pneumoniae (ATCC13883), Candida albicans (ATCC10221), and Aspergillus niger (ATCC16888). Beside s , antioxidant effects, anti-inflammatory capacity, and antineoplastic function versus HCT cells were assessed. The chemical profile of ozonized black seed oil showed elevation of essential molecules of oil as well as presence of some characteristic molecules to both forms of oil. Besides, it could be noticed that exposing of oil to ozone improves its antimicrobial activity towards all tested microbes except for C. albicans . Both forms of oil showed no activity towards A. niger . Black seed oil exposed to ozone showed a promising antioxidant capacity with IC 50 of 2.93 ± 0.2 µg/ml. A dramatic improvement in anti-inflammatory impact of ozonized oil as well as its antitumor capacity towards HCT cells could be seen in the laboratory outcomes. The current findings point to a novel method for enhancing some of the in vitro medicinal uses of black seed oil by exposing it to ozone.

Despite the discovery of many plant-based drugs, research is still ingoing, in addition to using safer and more effective methods in the extraction process. Presently, Super Fluid Extraction (SFE) was applied to extract the mango seed kernels (MSK) at two operating temperatures 30 and 50 °C with studying their biological activities. MSK extract via SFE at operating temperatures 30 °C showed high yield 0.268 g compared to that at 50 °C. High-performance liquid chromatography (HPLC) analysis demonstrated high content of compounds such as gallic acid (68503.01 µg/mL), chlorogenic acid (6541.68 µg/mL), ferulic acid (2555.12 µg/mL) and ellagic acid (2479.42 µg/mL) MSK while at 50 °C the concentrations were low. Helicobacter pylori was highly inhibited by MSK extract via SFE at operating temperature 30 °C with inhibition zone 29.17 ± 0.29 mm, MIC 15.62 µg/mL and MBC 31.25 µg/mL, while at operating temperature 50 °C the inhibition zone was 24.67 ± 0.58 mm, MIC was 62.5 µg/mL and MBC was 125 µg/mL. Moreover, low hemolysis was recorded by H. pylori treated by MSK extract via SFE at operating temperature 30 °C compared to that at 50 °C. Excellent antioxidant with IC 50 values of 4.34 and 10.5 µg/mL was recorded for MSK extract via SFE at operating temperatures 30 °C and 50 °C, respectively. The recorded IC 50 values 151.64 ± 0.53 and 73.81 ± 1.68 µg/mL compared to IC 50 202.83 ± 1.78 µg/mL and 85.78 ± 0.52 µg/mL indicated the efficacy of MSK extract via SFE at operating temperature 30 °C compared to that at 50 °C against prostate (PC3), and ovarian (SK-OV3) cancer cells lines, respectively.

The emergence of antibiotic-resistant microorganisms poses a significant threat to human health worldwide. Recent advances have led to the discovery of molecules with potent antimicrobial activity from environmental sources. In this study, fifteen bacterial isolates were obtained from agricultural and polluted soil samples collected from different areas of the cities of Jizan and Jeddah. These isolates were screened for antagonistic activity against a set of human pathogenic bacterial strains. The results showed that two Bacillus strains, identified as Bacillus atrophaeus and Bacillus amyloliquefaciens based on 16S rDNA, synthesized bacteriocin with strong antibacterial activity against Methicillin-resistant Staphylococcus aureus (MRSA) ATCC 33591, Pseudomonas aeruginosa ATCC 9027, Salmonella typhimum ATCC 14028, carbapenem-resistant E. coli, and MRSA 2. To optimize bacteriocin production, the effects of medium composition, incubation period, temperature, and pH were investigated. Nutrient broth and Mueller–Hinton broth were chosen as the optimal original media for bacteriocin production. The optimal incubation period, temperature, and pH were found to be 48 h at 37 °C and 7 pH in Bacillus atrophaeus and 72 h at 37 °C and 8 pH in Bacillus amyloliquefaciens. Batch cultures of Bacillus atrophaeus and Bacillus amyloliquefaciens were grown in a 10 L benchtop bioreactor, and pH control was found to significantly increase the production of bacteriocin by two-fold compared to uncontrolled conditions. The time course of growth, substrate consumption, pH, and enzyme production were investigated. This study demonstrates the potential of optimizing culture conditions and batch process control to enhance bacteriocin production by Bacillus spp.

Waste cooking oil is a common byproduct in the culinary industry, often posing disposal challenges. This study explores its conversion into the valuable bioplastic material, medium-chain-length polyhydroxyalkanoate (mcl-PHA), through microbial biosynthesis in controlled bioreactor conditions. Twenty-four bacterial isolates were obtained from oil-contaminated soil and waste materials in Mahd Ad-Dahab, Saudi Arabia. The best PHA-producing isolates were identified via 16S rDNA analysis as Neobacillus niacini and Metabacillus niabensis, with the sequences deposited in GenBank (accession numbers: PP346270 and PP346271). This study evaluated the effects of various carbon and nitrogen sources, as well as environmental factors, such as pH, temperature, and shaking speed, on the PHA production titer. Neobacillus niacini favored waste cooking oil and yeast extract, achieving a PHA production titer of 1.13 g/L, while Metabacillus niabensis preferred waste olive oil and urea, with a PHA production titer of 0.85 g/L. Both strains exhibited optimal growth at a neutral pH of 7, under optimal shaking -flask conditions. The bioreactor performance showed improved PHA production under controlled pH conditions, with a final titer of 9.75 g/L for Neobacillus niacini and 4.78 g/L for Metabacillus niabensis. Fourier transform infrared (FT-IR) spectroscopy and gas chromatography–mass spectrometry (GC-MS) confirmed the biosynthesized polymer as mcl-PHA. This research not only offers a sustainable method for transforming waste into valuable materials, but also provides insights into the optimal conditions for microbial PHA production, advancing environmental science and materials engineering.

The emergence of antibiotic-resistant microorganisms poses a significant threat to human health worldwide. Recent advances have led to the discovery of molecules with potent antimicrobial activity from environmental sources. In this study, fifteen bacterial isolates were obtained from agricultural and polluted soil samples collected from different areas of the cities of Jizan and Jeddah. These isolates were screened for antagonistic activity against a set of human pathogenic bacterial strains. The results showed that two Bacillus strains, identified as Bacillus atrophaeus and Bacillus amyloliquefaciens based on 16S rDNA, synthesized bacteriocin with strong antibacterial activity against Methicillin-resistant Staphylococcus aureus (MRSA) ATCC 33591, Pseudomonas aeruginosa ATCC 9027, Salmonella typhimum ATCC 14028, carbapenem-resistant E. coli, and MRSA 2. To optimize bacteriocin production, the effects of medium composition, incubation period, temperature, and pH were investigated. Nutrient broth and Mueller–Hinton broth were chosen as the optimal original media for bacteriocin production. The optimal incubation period, temperature, and pH were found to be 48 h at 37 °C and 7 pH in Bacillus atrophaeus and 72 h at 37 °C and 8 pH in Bacillus amyloliquefaciens. Batch cultures of Bacillus atrophaeus and Bacillus amyloliquefaciens were grown in a 10 L benchtop bioreactor, and pH control was found to significantly increase the production of bacteriocin by two-fold compared to uncontrolled conditions. The time course of growth, substrate consumption, pH, and enzyme production were investigated. This study demonstrates the potential of optimizing culture conditions and batch process control to enhance bacteriocin production by Bacillus spp.

Extracts of medicinal seeds can be used to synthesize nanoparticles (NPs) in more environmentally friendly ways than physical or chemical ways. For the first time, aqueous extract from unexploited grape seeds was used in this study to create Se/ZnO NPS utilizing a green technique, and their antimicrobial activity, cytotoxicity, antioxidant activities, and plant bio stimulant properties of the economic Vicia faba L. plant were evaluated. Se/ZnO NPS is characterized by SEM and TEM images, FTIR, and XRD. Through the well diffusion assay and the scavenging of 1,1-Diphenyl-2-picrylhydrazyl (DPPH) free radical experiment, biogenic Se/ZnO NPs demonstrated their antibacterial and antioxidant activities. The nanomaterial compound showed the highest inhibitory effects of 99.7, 55.63, 16.91, 10.25, 6.61, 3.83, 3.00, and 2.59%, respectively, against the cervical carcinoma (SKOV3 cells) cell line at conc of 7.81, 15.62, 31.25, 62.5, 125, 250, 500, and 1000 µg/ml, respectively, with IC50 values at 20.31 µg, resulting in 50% cell death. This study demonstrated the value of bimetallic nano-fertilizers Se/Zn in promoting faba bean development, yield features, and metabolite contents (protein, phenol, carbs, and pigments). These fertilizers are probably also advantageous for other crops. When applied in contrast to the control, 100 ppm of biological nano-Se/ZnO may generally result in the best growth and yield of faba beans. Further research is needed on the ecological aspect of biological nanofertilizers in addition to the economic one.