Explore the vast range of titles available.

Roy Lichtenstein’s Whaam! (1963) is an iconic artwork in Tate’s collection (T00897). Over the past 50 years, the painting has been on almost continuous display and had accrued a layer of deposited soiling, which resulted in the dampening of Lichtenstein’s vibrant colours and the masking of numerous subtleties across the painting surface. This paper outlines the design and execution of an optimal soiling removal strategy for this challenging work; utilising collaborative, practice-based research. The conservation treatment employed was derived through an iterative process that reflected and supported the conservation decision-making process. The research strands included: technical and art historical investigations to determine the materials and construction of Whaam! and to define the aims of the conservation treatment; preparation of accelerated aged and artificially soiled test (mock-up) paint samples based on contemporary equivalent materials and a comparative evaluation of a range of established and novel soil-removal systems, followed by further tailoring for use on the work of art. The range of cleaning systems evaluated included free-solvents, gels and emulsifiers; which were documented using star diagrams, digital microscopy and infrared spectroscopy. After a rigorous process of assessment and refinement, the strategy taken forward to Whaam! included the use of a polyvinyl alcohol-based polymeric hydrogel (Nanorestore Gel® Peggy 6), uploaded with tailored aqueous solutions. This process facilitated a low risk, controlled and even-removal of the soiling layer, enabling the successful treatment of this sensitive painting for the first time in the painting’s history.

This paper describes the methodology and practice-based research underpinning the development of a successful cleaning strategy for Eva Hesse’s sculpture Addendum (1967, Tate Collection T02394). Research strands included: technical and art historical investigations to determine the materials and construction of the work of art and to define the aims of the conservation treatment; the production, soiling and accelerated ageing of mock-up samples using contemporary equivalent materials; and the systematic, iterative evaluation of soiling removal systems, which were further refined for appropriate use on the work of art. The comparative cleaning system evaluation was employed to determine options which offered optimal soiling removal efficacy and posed minimal risk to the work of art. Newly developed Nanorestore Gel® Peggy series (i.e. polyvinyl alcohol (PVA) and polyvinyl alcohol/polyvinylpyrrolidone (PVA/PVP)-based hydrogels), designed for the cleaning of modern and contemporary art, were evaluated with a range of other gels, emulsifiers and cosmetic sponges and assessed through a combination of empirical observation, microscopy and spectroscopic techniques. Promising options, combined with tailored aqueous phases derived from trials on mock-up samples, were then evaluated on discreet areas of the sculpture. After extensive testing, the top papier mâché section of Addendum was surface cleaned using an aqueous solution applied with cosmetic sponges, and the ropes were surface cleaned using a modified version of Nanorestore Gel® Peggy 5 (PVA/PVP) loaded with a tailored aqueous solution. The optimisation of this hydrogel, combined with the extensive supporting research, enabled the successful, low-risk, conservation treatment of Addendum for the first time since acquisition.

Surface cleaning of plastic materials of historical value can be challenging due to the high risk of inducing detrimental effects and visual alterations. As a result, recent studies have focused on researching new approaches that might reduce the associated hazards and, at the same time, minimize the environmental impact by employing biodegradable and green materials. In this context, the present work investigates the effects and potential suitability of dense carbon dioxide (CO2) as an alternative and green solvent for cleaning plastic materials of historical value. The results of extensive trials with CO2 in different phases (supercritical, liquid, and vapor) and under various conditions (pressure, temperature, exposure, and depressurization time) are reported for new, transparent, thick poly(methyl methacrylate) (PMMA) samples. The impact of CO2 on the weight, the appearance of the samples (dimensions, color, gloss, and surface texture), and modifications to their physicochemical and mechanical properties were monitored via a multi-analytical approach that included optical microscopy, Raman and attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopies, and micro-indentation (Vickers hardness). Results showed that CO2 induced undesirable and irreversible changes in PMMA samples (i.e., formation of fractures and stress-induced cracking, drastic decrease in the surface hardness of the samples), independent of the conditions used (i.e., temperature, pressure, CO2 phase, and exposure time).

Leather artifacts in historical collections and archives are often contaminated by physical changes such as soiling, which alter their appearance and readability, and by chemical changes which occur on aging and give rise to excessive proportion of acids that promote hydrolysis of collagen, eventually leading to gelatinization and loss of mechanical properties. However, both cleaning and pH adjustment of vegetable-tanned leather pose a great challenge for conservators, owing to the sensitivity of these materials to the action of solvents, especially water-based formulations and alkaline chemicals. In this study, the cleaning of historical leather samples was optimized by confining an oil-in-water nanostructured fluid in a highly retentive chemical hydrogel, which allows the controlled release of the cleaning fluid on sensitive surfaces. The chemical gel exhibits optimal viscoelasticity, which facilitates its removal after the application without leaving residues on the object. Nanoparticles of calcium hydroxide and lactate, dispersed in 2-propanol, were used to adjust the pH up to the natural value of leather, preventing too high alkalinity which causes swelling of fibers and denaturation of the collagen. The treated samples were characterized using scanning electron microscopy, controlled environment dynamic mechanical analysis, and infrared spectroscopy. The analytical assessment validated the use of tools derived from colloid and materials science for the preservation of collagen-based artifacts.

This work investigates the suitability of supercritical fluid technology for designing a safe, efficient and sustainable consolidation treatment for a pair of heavily degraded goalkeeper gloves. Traditional methods have revealed themselves as unsafe and inefficient, leading to material loss and a minimal enhancement of surface cohesion. To overcome these limitations, the use of supercritical carbon dioxide (scCO2) was explored in a treatment, where scCO2 behaves as a green solvent and consolidant carrier. In-depth and homogeneous application of the consolidant, without the need for direct contact with the foam material, was sought. As a proof of concept, the procedure was tested on samples that mimic the synthetic latex-based foam composition and condition of the object. Poly(vinyl acetate) was selected as a consolidant because its behaviour and solubility in scCO2 are known. Several experimental conditions were explored to assess the impact and feasibility of the scCO2-assisted consolidation procedure. Empirical observations, optical microscopy, scanning electron microscopy and infrared spectroscopy were used to monitor potential modifications in the samples and assess the treatment efficacy. The results highlighted the advantages and pitfalls of scCO2-assisted consolidation, paving the way for fine-tuning the process. It neither damaged the fragile surfaces of the foam samples nor increased material loss, which is an advantage compared to traditional treatments. The performed analysis suggested that homogeneous impregnation of the foams was achieved. This study might be a turning point in the conservation of foam-based museum objects, as the results indicate the suitability of the scCO2-assisted consolidation process as a non-toxic and more efficient alternative, being safer for the object.

Degradation of ester-based polyurethane (PUR) foams results in extensive fragmentation, stickiness, and brittleness both at surfaces and in the bulk. Current methods to conserve museum objects comprising PUR foams include consolidation with solvent-based polymeric solutions. Besides the limitations of spray and brush application for deep consolidant penetration and the impracticality of immersing large-scale objects in solutions, these methods often require large amounts of toxic solvents that are harmful for both the user and environment. Carbon dioxide can be employed as a green solvent as it can be recovered, recycled, and reused without contributing to the greenhouse effect. Supercritical carbon dioxide (scCO2)-assisted consolidation premises are that it may carry the consolidant deeper and deposit it consistently throughout the foam, whilst ensuring minimal interaction with the surface and avoiding material losses in severely degraded objects and the use of toxic solvents. The suitability of scCO2 as a carrier is studied, and the results compared with spray application, a commonly used traditional method. Previous studies have shown that a mixture of alkoxysilanes has great potential for reinforcing the foam’s structure and hydrophobicity when applied by immersion and other impregnation techniques. In this study, scCO2-assisted consolidation has proven to be an effective and green alternative to consolidation by spray, reducing hazardous solvent emissions. After treatment, no visual changes were detected, the samples became less sticky, and the foam flexibility improved significantly. Analytical techniques confirmed the presence of the consolidant in all tested samples, both on the top surface and in-depth layers, in contrast to foams treated by spray.

Systematic condition and analytical surveys were carried out on Zoe Leonard’s (b. 1961) Mouth Open, Teeth Showing 2000, an installation artwork in Tate’s collection consisting of 162 children’s dolls. The dolls were manufactured at various points within the 20th century and encompass several potentially problematic synthetic polymers found in modern and contemporary museum collections. To explore the doll materials and conservation condition, a multi-analytical approach was used to identify key synthetic polymer types and additives present, including portable and bench analytical techniques. Challenging degradation phenomena associated with different types of doll have been discussed and related to their material composition, which has helped our understanding of the conservation challenges inherent to this contemporary artwork.

Systematic condition and analytical surveys were carried out on Zoe Leonard’s (b. 1961) Mouth Open, Teeth Showing 2000, an installation artwork in Tate’s collection consisting of 162 children’s dolls. The dolls were manufactured at various points within the 20th century and encompass several potentially problematic synthetic polymers found in modern and contemporary museum collections. To explore the doll materials and conservation condition, a multi-analytical approach was used to identify key synthetic polymer types and additives present, including portable and bench analytical techniques. Challenging degradation phenomena associated with different types of doll have been discussed and related to their material composition, which has helped our understanding of the conservation challenges inherent to this contemporary artwork.

BackgroundImmune and vascular ageing are proposed risk factors for giant cell arteritis (GCA). Data on the impact of age at diagnosis of GCA on the clinical presentation and course of the disease are scarce.MethodsPatients with GCA followed at referral centres within the Italian Society of Rheumatology Vasculitis Study Group were enrolled up to November 2021. Patients were grouped according to age at diagnosis: ≤64, 65–79 and ≥80 years old.ResultsThe study included 1004 patients, mean age 72.1±8.4, female 70.82%. Median follow-up duration was 49 (IQR 23–91) months. Patients in the oldest group (≥80 years) had significantly more cranial symptoms, ischaemic complications and risk for blindness compared with the groups 65–79 and ≤64 years (blindness: 36.98% vs 18.21% vs 6.19%; p<0.0001). Large-vessel-GCA was more frequent in the youngest group (65% of patients). Relapses occurred in 47% of patients. Age did not influence the time to first relapse, nor the number of relapses. Older age was negatively associated with the number of adjunctive immunosuppressants. Patients >65 years old had 2–3 fold increased risk for aortic aneurysm/dissection up to 60 months follow-up. Serious infections, but not other treatment-related complications (hypertension, diabetes, osteoporotic fractures), were significantly associated with older age. Mortality occurred in 5.8% of the population with age >65, cranial and systemic symptoms as independent risk factors.ConclusionsThe highest risk of ischaemic complications, aneurysm development, serious infections and the possible undertreatment make of GCA a very challenging disease in the oldest patients.