Explore the vast range of titles available.

The Co 3 O 4 @N-MWCNT composite was synthesized by a sonication-supported thermal reduction process for supercapacitor applications. The structural and morphological properties of the materials were characterized via Raman, XRD, XPS, SEM–EDX, and FE-TEM analysis. The composite electrode was constructed into a three-electrode configuration and examined by using CV, GCD and EIS analysis. The demonstrated electrochemical value of ~ 225 F/g at 0.5 A/g by the electrode made it appropriate for potential use in supercapacitor applications.

Nitrogen-doped multiwalled carbon nanotubes (N-MWCNTs) have been used to fabricate nanostructured materials for various energy devices, such as supercapacitors, sensors, batteries, and electrocatalysts. Nitrogen-doped carbon-based electrodes have been widely used to improve supercapacitor applications via various chemical approaches. Based on previous studies, CuO@MnO 2 and CuO@MnO 2 /N-MWCNT composites were synthesized using a sonication-supported hydrothermal reaction process to evaluate their supercapacitor properties. The structural and morphological properties of the synthesized composite materials were characterized via Raman spectroscopy, XRD, SEM, and SEM–EDX, and the morphological properties of the composite materials were confirmed by the nanostructured composite at the nanometer scale. The CuO@MnO 2 and CuO@MnO 2 /N-MWCNT composite electrodes were fabricated in a three-electrode configuration, and electrochemical analysis was performed via CV, GCD, and EIS. The composite electrodes exhibited the specific capacitance of ~ 184 F g −1 at 0.5 A g −1 in the presence of a 5 M KOH electrolyte for the three-electrode supercapacitor application. Furthermore, it exhibited significantly improved specific capacitances and excellent cycling stability up to 5000 GCD cycles, with a 98.5% capacity retention.

In this study, a novel nanohybrid composite containing nitrogen-doped multiwalled carbon nanotubes/carboxymethylcellulose (N-MWCNT/CMC) was synthesized for supercapacitor applications. The synthesized composite materials were subjected to an ultrasonication-mediated solvothermal hydrothermal reaction. The synthesized nanohybrid composite electrode material was characterized using analytical methods to confirm its structure and morphology. The electrochemical properties of the composite electrode were investigated using cyclic voltammetry (CV), galvanic charge–discharge, and electrochemical impedance spectroscopy (EIS) using a 3 M KOH electrolyte. The fabricated composite material exhibited unique electrochemical properties by delivering a maximum specific capacitance of approximately 274 F g −1 at a current density of 2 A g −1 . The composite electrode displayed high cycling stability of 96% after 4000 cycles at 2 A g −1 , indicating that it is favorable for supercapacitor applications.

In this current study, aminated graphene oxide (AGO) doped on alginate (Alg) matrix offers AGO@Alg hybrid spheres was developed to investigate its potential for retention of fluoride from water. The sophisticated characterization methods likely TGA, SEM, XPS and FTIR studies of AGO@Alg hybrid spheres were attained to recognize its physicochemical properties like thermal stability, morphology, elemental binding energy and functional groups determination. The responsible parameters for fluoride adsorption on AGO@Alg hybrid spheres were optimized under a batch mode to achieve improve defluoridation capacity (DC). The developed AGO@Alg hybrid spheres follow the electrostatic interaction mechanism on fluoride removal. The adsorption isotherms (Langmuir, Temkin, Dubinin–Radushkevich (D–R) and Fruendlich models), kinetics (reaction and diffusion based models) and thermodynamic parameters (ΔS°, ΔG° and ΔH°) were investigated at 303, 313 and 323 K. To minimize the cost-effectiveness of AGO@Alg hybrid spheres the reusability test was carried out. The suitability of AGO@Alg hybrid spheres was also analyzed for the fluoride contaminated field sample taken from fluoride prevalent village.

Developing efficient electrocatalysts for urea oxidation reaction (UOR) can be a promising alternative strategy to substitute the sluggish oxygen evolution reaction (OER), thereby producing hydrogen at a lower cell-voltage. Herein, we synthesized a binder-free thin film of ultrathin sheets of bimetallic Cu-Fe-based metal–organic frameworks (Cu/Fe-MOFs) on a nickel foam via a drop-casting route. In addition to the scalable route, the drop-casted film-electrode demonstrates the lower UOR potentials of 1.59, 1.58, 1.54, 1.51, 1.43 and 1.37 V vs. RHE to achieve the current densities of 2500, 2000, 1000, 500, 100 and 10 mA cm−2, respectively. These UOR potentials are relatively lower than that acquired by the pristine Fe-MOF-based film-electrode synthesized via a similar route. For example, at 1.59 V vs. RHE, the Cu/Fe-MOF electrode exhibits a remarkably ultra-high anodic current density of 2500 mA cm−2, while the pristine Fe-MOF electrode exhibits only 949.10 mA cm−2. It is worth noting that the Cu/Fe-MOF electrode at this potential exhibits an OER current density of only 725 mA cm−2, which is far inconsequential as compared to the UOR current densities, implying the profound impact of the bimetallic cores of the MOFs on catalyzing UOR. In addition, the Cu/Fe-MOF electrode also exhibits a long-term electrochemical robustness during UOR.

Solvent-free mechanochemical synthesis of efficient and low-cost double perovskite (DP), like a cage of Prussian blue (PB) and PB analogs (PBAs), is a promising approach for different applications such as chemical sensing, energy storage, and conversion. Although the solvent-free mechanochemical grinding approach has been extensively used to create halide-based perovskites, no such reports have been made for cyanide-based double perovskites. Herein, an innovative solvent-free mechanochemical synthetic strategy is demonstrated for synthesizing Fe4[Fe(CN)6]3, Co3[Fe(CN)6]2, and Ni2[Fe(CN)6], where defect sites such as carbon–nitrogen vacancies are inherently introduced during the synthesis. Among all the synthesized PB analogs, the Ni analog manifests a considerable electrocatalytic oxygen evolution reaction (OER) with a low overpotential of 288 mV to obtain the current benchmark density of 20 mA cm−2. We hypothesize that incorporating defects, such as carbon–nitrogen vacancies, and synergistic effects contribute to high catalytic activity. Our findings pave the way for an easy and inexpensive large-scale production of earth-abundant non-toxic electrocatalysts with vacancy-mediated defects for oxygen evolution reaction.

Designing efficient electrocatalytic systems through facile synthesis remains a formidable task. To address this issue, this paper presents the design of a combination material comprising two transition metal oxides (copper oxide and manganese oxide (CuO/MnO2)), synthesized using a conventional microwave technique to efficiently engage as an active oxygen evolution reaction (OER) catalyst. The structural and morphological properties of the composite were confirmed by the aid of X-ray diffraction (XRD) studies, field emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), and energy-dispersive spectrometry (EDS). FESEM clearly indicated well-aligned interlacing of CuO with MnO2. The OER performance was carried out in 1 M KOH. The assembled CuO/MnO2 delivered a benchmark current density (j = 10 mA cm−2) at a minimal overpotential (η = 294 mV), while pristine CuO required a high η (316 mV). Additionally, the CuO/MnO2 electrocatalyst exhibited stability for more than 15 h. These enhanced electrochemical performances were attributed to the large volume and expanded diameter of the pores, which offer ample surface area for catalytic reactions to boost OER. Furthermore, the rate kinetics of the OER are favored in composite due to low Tafel slope (77 mV/dec) compared to CuO (80 mV/dec).

Cation-disordered rocksalt (DRX) cathodes have been viewed as next-generation high-energy density materials surpassing conventional layered cathodes for lithium-ion battery (LIB) technology. Utilizing the opportunity of a better cation mixing facility in DRX, we synthesize Na-doped DRX as an efficient electrocatalyst toward oxygen evolution reaction (OER). This novel OER electrocatalyst generates a current density of 10 mA cm−2 at an overpotential (η) of 270 mV, Tafel slope of 67.5 mV dec−1, and long-term stability >5.5 days’ superior to benchmark IrO2 (η = 330 mV with Tafel slope = 74.8 mV dec−1). This superior electrochemical behavior is well supported by experiment and sparse Gaussian process potential (SGPP) machine learning-based search for minimum energy structure. Moreover, as oxygen binding energy (OBE) on the surface closely relates to OER activity, our density functional theory (DFT) calculations reveal that Na-doping assists in facile O2 evolution (OBE = 5.45 eV) compared with pristine-DRX (6.51 eV).

Demand for determining renewable lipids feedstock for the production of biodiesel is increasing with the rapid depletion of petroleum diesel. The present study was conducted to assess the feasibility of utilizing municipal sewage sludge (MSS) as a potential lipids feedstock for biodiesel production. The lipids’ extraction and separation from MSS were conducted using supercritical CO2 (scCO2) with varying treatment time (15–120 min), temperature (30–80°C), pressure (10–50 MPa), and addition of cosolvents (1–10 wt.%). The modified Gompertz equation and Arrhenius equation were employed to evaluate lipids’ extraction and kinetics behavior from municipal sewage sludge using scCO2. About 27% of lipids were extracted from MSS with scCO2 at a temperature of 60°C, pressure of 30 MPa, treatment time of 60 min, and 5 wt.% of ethanol (EtOH) as cosolvent. The modified Gompertz equation was adequately fitted with experimental data of the lipids’ extraction from MSS using scCO2. The kinetics properties analyses revealed that the scCO2 extraction technology was highly dependent on pressure than the temperature for the extraction of the lipids from MSS. The physicochemical characteristics and fatty acid contents of the scCO2 extracted lipids from MSS and sewage sludge biodiesel were determined using a variety of analytical techniques. The physicochemical properties of the sewage sludge biodiesel were compared with the international standard specifications of biodiesel, such as the American Society for Testing and Materials specifications for diesel fuel (ASTM D6751) and European Standard (EN 14214) specifications.

Organic-inorganic hybrid perovskite materials continue to attract significant interest due to their optoelectronic application. However, the degradation phenomenon associated with hybrid structures remains a challenging aspect of commercialization. To overcome the stability issue, we have assembled the methylammonium lead bromide nano islands (MNIs) on the backbone of poly-3-dodecyl-thiophene (PDT) for the first time. The structural and morphological properties of the MNI-PDT composite were confirmed with the aid of X-ray diffraction (XRD) studies, Field emission scanning electron microscope (FESEM), and X-ray photoelectron spectroscopy (XPS). The optical properties, namely absorption studies, were carried out by ultraviolet-visible spectroscopy. The fluorescent behavior is determined by photoluminescence (PL) spectroscopy. The emission peak for the MNI-PDT was observed at 536 nm. The morphology studies supported by FESEM indicated that the nano islands are completely covered on the surface of the polymer backbone, making the hybrid (MNI-PDT) stable under environmental conditions for three months. The interfacial interaction strategy developed in the present work will provide a new approach for the stabilization of hybrids for a longer time duration.