Explore the vast range of titles available.

High-performance thermally insulating materials from renewable resources are needed to improve the energy efficiency of buildings. Traditional fossil-fuel-derived insulation materials such as expanded polystyrene and polyurethane have thermal conductivities that are too high for retrofitting or for building new, surface-efficient passive houses. Tailored materials such as aerogels and vacuum insulating panels are fragile and susceptible to perforation. Here, we show that freeze-casting suspensions of cellulose nanofibres, graphene oxide and sepiolite nanorods produces super-insulating, fire-retardant and strong anisotropic foams that perform better than traditional polymer-based insulating materials. The foams are ultralight, show excellent combustion resistance and exhibit a thermal conductivity of 15 mW m −1  K −1 , which is about half that of expanded polystyrene. At 30 °C and 85% relative humidity, the foams retained more than half of their initial strength. Our results show that nanoscale engineering is a promising strategy for producing foams with excellent properties using cellulose and other renewable nanosized fibrous materials. Freeze-casting cellulose nanofibres, graphene oxide and clay results in insulating and fire-resistant foams that could improve the energy efficiency of buildings.

HighlightsThe study reveals the great potential of metal–organic framework (MOF)-based nanocomposites in thermal insulation and fire retardancy applications.A nanoengineering approach was developed to process MOFs into freestanding, mechanically strong, and elastic aerogels, which may boost the fundamental research and practical applications of MOFs in these areas.

Foams made from cellulose nanomaterials are highly porous and possess excellent mechanical and thermal insulation properties. However, the moisture uptake and hygroscopic properties of these materials need to be better understood for their use in biomedical and bioelectronics applications, in humidity sensing and thermal insulation. In this work, we present a combination of hybrid Grand Canonical Monte Carlo and Molecular Dynamics simulations and experimental measurements to investigate the moisture uptake within nanocellulose foams. To explore the effect of surface modification on moisture uptake we used two types of celluloses, namely TEMPO-oxidized cellulose nanofibrils and carboxymethylated cellulose nanofibrils. We find that the moisture uptake in both the cellulose nanomaterials increases with increasing relative humidity (RH) and decreases with increasing temperature, which is explained using the basic thermodynamic principles. The measured and calculated moisture uptake in amorphous cellulose (for a given RH or temperature) is higher as compared to crystalline cellulose with TEMPO- and CM-modified surfaces. The high water uptake of amorphous cellulose films is related to the formation of water-filled pores with increasing RH. The microscopic insight of water uptake in nanocellulose provided in this study can assist the design and fabrication of high-performance cellulose materials with improved properties for thermal insulation in humid climates or packaging of water sensitive goods.Graphic abstract

Nanocellulose is a renewable material that combines a high surface area with high strength, chemical inertness, and versatile surface chemistry. In this review, we will briefly describe how nanocellulose is produced, and present—in particular, how nanocellulose and its surface modified versions affects the adsorption behavior of important water pollutants, e.g., heavy metal species, dyes, microbes, and organic molecules. The processing of nanocellulose-based membranes and filters for water purification will be described in detail, and the uptake capacity, selectivity, and removal efficiency will also be discussed. The processing and performance of nanocellulose-based membranes, which combine a high removal efficiency with anti-fouling properties, will be highlighted.

We report the fabrication of anisotropic lightweight composite foams based on commercial colloidal silica particles and TEMPO-oxidized cellulose nanofibrils (TOCNF). The unidirectional ice-templating of silica-TOCNF dispersions resulted in anisotropic foams with columnar porous structures in which the inorganic and organic components were homogeneously distributed. The facile addition of silica particles yielded a significant enhancement in mechanical strength, compared to TOCNF-only foams, and a 3.5-fold increase in toughness at a density of 20 kg m−3. The shape of the silica particles had a large effect on the mechanical properties; anisotropic silica particles were found to strengthen the foams more efficiently than spherical particles. The water uptake of the foams and the axial thermal conductivity in humid air were reduced by the addition of silica. The composite foams were super-insulating at dry conditions at room temperature, with a radial thermal conductivity value as low as 24 mW m−1 K−1, and remained lower than 35 mW m−1 K−1 up to 80% relative humidity. The combination of high strength, low thermal conductivity and manageable moisture sensitivity suggests that silica-TOCNF composite foams could be an attractive alternative to the oil-based thermal insulating materials.

This review describes recent efforts on the synthesis, dispersion and surface functionalization of the three dominating oxide nanoparticles used for photocatalytic, UV-blocking and sunscreen applications: titania, zinc oxide, and ceria. The gas phase and liquid phase synthesis is described briefly and examples are given of how weakly aggregated photocatalytic or UV-absorbing oxide nanoparticles with different composition, morphology and size can be generated. The principles of deagglomeration are reviewed and the specific challenges for nanoparticles highlighted. The stabilization of oxide nanoparticles in both aqueous and non-aqueous media requires a good understanding of the magnitude of the interparticle forces and the surface chemistry of the materials. Quantitative estimates of the Hamaker constants in various media and measurements of the isoelectric points for the different oxide nanoparticles are presented together with an overview of different additives used to prepare stable dispersions. The structural and chemical requirements and the various routes to produce transparent photocatalytic and nanoparticle-based UV-protecting coatings, and UV-blocking sunscreens are described and discussed.

Tailoring the structure of nanocrystal superlattices is an important step toward controlled design of novel nanostructured materials and devices. We demonstrate how the long-range order and macroscopic dimensions of magnetic nanoparticle arrays can be controlled by the use of a modulated magnetic field. Inducing a dipolar attraction during the initial stage of the drying-mediated self-assembly process was sufficient to assemble the superparamagnetic oleate-capped maghemite nanocubes into large and defect-free superstructures with both translational and orientational order. The characteristic dimensions of the superlattice are controlled by the particle concentration as well as the duration of the applied magnetic field. The superparamagnetic maghemite nanocubes assemble into large and highly oriented thin arrays by applying the magnetic field perpendicular to the substrate surface only during the initial phase of drying-mediated self-assembly. Micrometer-sized and thick three-dimensional mesocrystals are obtained when the drying dispersion is subjected to an external magnetic field of moderate strength for the entire duration of the assembly process. The discovery of how translational and orientation order of nanocrystal superlattices can be induced by a temporal modulation of an anisotropic interparticle force offers new insight on the importance of the initial nucleation stage in the self-assembly process and suggests new routes for controlled self-assembly of dipolar nanocrystals.

Self-assembly of nanocrystals is extensively used to generate superlattices with long-range translational order and atomic crystallographic orientation, i.e. mesocrystals, with emergent mesoscale properties, but the predictability and tunability of the assembly methods are poorly understood. Here, we report how mesocrystals produced by poor-solvent enrichment can be tuned by solvent composition, initial nanocrystal concentration, poor-solvent enrichment rate, and excess surfactant. The crystallographic coherence and mesoscopic order within the mesocrystal were characterized using techniques in real and reciprocal spaces, and superlattice growth was followed in real time by small-angle X-ray scattering. We show that formation of highly ordered superlattices is dominated by the evaporation-driven increase of the solvent polarity and particle concentration, and facilitated by excess surfactant. Poor-solvent enrichment is a versatile nanoparticle assembly method that offers a promising production route with high predictability to modulate and maximize the size and morphology of nanocrystal metamaterials. Versatile methods that can predictably assemble nanocrystals into large, well-ordered superlattices are rare. Here, the authors develop such a method–evaporation-driven poor-solvent enrichment–and rigorously determine the effect of various experimental parameters on the size, morphology, and mesoscopic order of the superlattices, giving the approach high predictive power.

Anisotropic cellulose nanocrystal (CNC) foams with densities between 25 and 130 kg m −3 (CNC 25 –CNC 130 ) were prepared by directional ice-templating of aqueous dispersions. Estimates of the solid and gas conduction contributions to the thermal conductivity of the foams using a parallel resistor model showed that the relatively small increase of the radial thermal conductivity with increasing foam density can be attributed to interfacial phonon scattering. The foam wall nanoporosity and, to a lesser extent, the orientation of the CNC particles and alignment of the columnar macropores, also influence the insulation performance of the foams. The insight on the importance of phonon scattering for the thermal insulation properties of nanocellulose foams provides useful guidelines for tailoring nanofibrillar foams for super-insulating applications.

Nanocellulose-based lightweight foams are promising alternatives to fossil-based insulation materials for energy-efficient buildings. The properties of cellulose-based materials are strongly influenced by moisture and there is a need to assess and better understand how the thermal conductivity of nanocellulose-based foams depends on the relative humidity and temperature. Here, we report a customized setup for measuring the thermal conductivity of hydrophilic materials under controlled temperature and relative humidity conditions. The thermal conductivity of isotropic foams based on cellulose nanofibrils and a nonionic polyoxamer, and an expanded polystyrene foam was measured over a wide range of temperatures and relative humidity. We show that a previously developed model is unable to capture the strong relative humidity dependence of the thermal conductivity of the hygroscopic, low-density nanocellulose- and nonionic polyoxamer-based foam. Analysis of the moisture uptake and moisture transport was used to develop an empirical model that takes into consideration the moisture content and the wet density of the investigated foam. The new empirical model could predict the thermal conductivity of a foam with a similar composition but almost 3 times higher density. Accurate measurements of the thermal conductivity at controlled temperature and relative humidity and availability of simple models to better predict the thermal conductivity of hygroscopic, low-density foams are necessary for the development of nanocellulose-based insulation materials.