Explore the vast range of titles available.

Hydroxycinnamic acids are widely distributed in the plant kingdom, both as free compounds and as conjugates with other molecules, such as amino acids, carbohydrates, alcohols or amines, and polyamines, forming different derivatives, such as amides, esters, thioesters, or ethers. Among the different hydroxycinnamic acids, p-coumaric acid has a high bioavailability and its amide derivatives, also known as phenolamides (PAs) and hydroxycinnamic acid amides (HCAAs), play specific roles in plant development and defense. They are also involved in several biological activities that affect human health. The present review collected data and described secondary and tertiary amides of p-coumaric acids found in plants, from their natural sources to their biosynthesis. The review also described the acyl-transferase mechanisms involved in their formation, their roles in plants, as well as studies of their biological activities in humans.

Phenolic compounds are secondary metabolites frequently found in plants that exhibit many different effects on human health. Because of the relevant bioactivity, their identification and quantification in agro-food matrices as well as in biological samples are a fundamental issue in the field of quality control of food and food supplements, and clinical analysis. In this review, a critical selection of sensors and biosensors for rapid and selective detection of phenolic compounds is discussed. Sensors based on electrochemistry, photoelectrochemistry, fluorescence, and colorimetry are discussed including devices with or without specific recognition elements, such as biomolecules, enzymes and molecularly imprinted materials. Systems that have been tested on real matrices are prevalently considered but also techniques that show potential development in the field.

Poly-N-Vinylcaprolactam (PNVCL) is a thermoresponsive polymer that exhibits lower critical solution temperature (LCST) between 25 and 50 °C. Due to its alleged biocompatibility, this polymer is becoming popular for biomedical and environmental applications. PNVCL with carboxyl terminations has been widely used for the preparation of thermoresponsive copolymers, micro- and nanogels for drug delivery and oncological therapies. However, the fabrication of such specific targeting devices needs standardized and reproducible preparation methods. This requires a deep understanding of how the miscibility behavior of the polymer is affected by its structural properties and the solution environment. In this work, PNVCL-COOH polymers were prepared via free radical polymerization (FRP) in order to exhibit LCST between 33 and 42 °C. The structural properties were investigated with NMR, FT-IR and conductimetric titration and the LCST was calculated via UV-VIS and DLS. The LCST is influenced by the molecular mass, as shown by both DLS and viscosimetric values. Finally, the behavior of the polymer was described as function of its concentration and in presence of different biologically relevant environments, such as aqueous buffers, NaCl solutions and human plasma.

The cultivar Bianchera is an autochthonous variety from the eastern part of northern Italy, but it is also cultivated in the Slovenian and Croatian peninsula of Istria where it is named Belica (Slovenia) and Bjelica (Croatia). The properties of oleocanthal, a natural anti-inflammatory ibuprofen-like compound found in commercial monocultivar extra virgin olive oils, were determined by means of both quantitative 1H NMR (qNMR) and HPLC analyses, where qNMR was identified as a rapid and reliable method for determining the oleocanthal content. The total phenolic content (TPC) was determined by means of the Folin–Ciocalteau method and the major phenols present in the olive oils were also quantified by means of HPLC analyses. All these analyses confirmed that the cultivar Bianchera was very rich in polyphenols and satisfied the health claim provided by the EU Commission Regulation on the polyphenols content of olive oils and their beneficial effects on human health.

The synthesis of five hydroxycinnamoyl amides (HCAs) was accomplished and their identification and quantification in the green coffee bean samples of Coffea arabica, Coffea canephora, and Coffea liberica was performed. The HCAs p-coumaroyl-N-tyrosine 1b, caffeoyl-N-phenylalanine 2b, caffeoyl-N-tyrosine 3b, and p-coumaroyl-N-tryptophan 4b were characteristic of the C. canephora species while caffeoyl-N-tryptophan 5b was present in both C. canephora and C. arabica, but with higher content in C. canephora. The HCAs presence was also analyzed in C. liberica for the first time and none of the targeted compounds was found, indicating that this species is very similar to C. arabica species. Between C. canephora samples from various origins, significant differences were observed regarding the presence of all the HCAs, with C. canephora from Tanzania containing all five derivatives.

Chitosan is a natural polysaccharide that is considered to be biocompatible, biodegradable and non-toxic. The polymer has been used in drug delivery applications for its positive charge, which allows for adhesion with and recognition of biological tissues via non-covalent interactions. In recent times, chitosan has been used for the preparation of graft copolymers with thermoresponsive polymers such as poly-N-vinylcaprolactam (PNVCL) and poly-N-isopropylamide (PNIPAM), allowing the combination of the biodegradability of the natural polymer with the ability to respond to changes in temperature. Due to the growing interest in the utilization of thermoresponsive polymers in the biological context, it is necessary to increase the knowledge of the key principles of thermoresponsivity in order to obtain comparable results between different studies or applications. In the present review, we provide an overview of the basic principles of thermoresponsivity, as well as a description of the main polysaccharides and thermoresponsive materials, with a special focus on chitosan and poly-N-Vinyl caprolactam (PNVCL) and their biomedical applications.

Microgels can be considered soft, porous and deformable particles with an internal gel structure swollen by a solvent and an average size between 100 and 1000 nm. Due to their biocompatibility, colloidal stability, their unique dynamicity and the permeability of their architecture, they are emerging as important candidates for drug delivery systems, sensing and biocatalysis. In clinical applications, the research on responsive microgels is aimed at the development of “smart” delivery systems that undergo a critical change in conformation and size in reaction to a change in environmental conditions (temperature, magnetic fields, pH, concentration gradient). Recent achievements in biodegradable polymer fabrication have resulted in new appealing strategies, including the combination of synthetic and natural-origin polymers with inorganic nanoparticles, as well as the possibility of controlling drug release remotely. In this review, we provide a literature review on the use of dual and multi-responsive chitosan-grafted-poly-(N-vinylcaprolactam) (CP) microgels in drug delivery and oncological applications.

A library of dihydropyrimidinones was synthesized via a “one-pot” three component Biginelli reaction using different aldehydes in combination with β-dicarbonyl compounds and urea. Selected 2-thiooxo and 2-imino analogs were also obtained with the Biginelli reaction from thiourea and guanidine hydrochloride, respectively. The products were screened in vitro for their β-secretase inhibitory activity. The majority of the compounds resulted to be active, with IC50 in the range 100 nM–50 μM.

Green coffee beans are particularly rich in chlorogenic acids (CGAs), and their identification and quantification are usually performed by HPLC, coupled with mass spectrometry (LC-MS). Although there are a few examples of molecularly imprinted polymers (MIPs) for chlorogenic acid (5-CQA) recognition present in the literature, none of them are based on optical fluorescence, which is very interesting given its great sensitivity. In the present manuscript, fluorescent polymeric imprinted nanoparticles were synthetized following the non-covalent approach using hydrogenated 5-O-caffeoylquinic acid (H-5-CQA) as the template. The capability of the polymer to bind 5-CQA was evaluated by HPLC and fluorescence. A real sample of coffee extract was also analyzed to verify the selectivity of the polymer. Polymer fMIP01, containing 4-vinylpyridine and a naphtalimide derivative as monomers, showed a good response to the fluorescence quenching in the range 39 μM–80 mM. In the real sample, fMIP01 was able to selectively bind 5-CQA, while caffeine was not recognized. To demonstrate this, there is a promising system that can be exploited in the design of an optical sensor for 5-CQA detection. Polymer fMIP01 was immobilized by physical entrapment on a functionalized glass surface, showing a quenching of fluorescence with an increase of the CGA concentration between 156 μM and 40 mM.

The viral genome of the SARS-CoV-2 coronavirus, the aetiologic agent of COVID-19, encodes structural, non-structural, and accessory proteins. Most of these components undergo rapid genetic variations, though to a lesser extent the essential viral proteases. Consequently, the protease and/or deubiquitinase activities of the cysteine proteases M and PL became attractive targets for the design of antiviral agents. Here, we develop and evaluate new bis(benzylidene)cyclohexanones (BBC) and identify potential antiviral compounds. Three compounds were found to be effective in reducing the SARS-CoV-2 load, with EC values in the low micromolar concentration range. However, these compounds also exhibited inhibitory activity IC against PL at approximately 10-fold higher micromolar concentrations. Although originally developed as PL inhibitors, the comparison between IC and EC of BBC indicates that the mechanism of their antiviral activity is probably not directly related to inhibition of viral cysteine proteases. In conclusion, our study has identified new potential noncytotoxic antiviral compounds suitable for testing and further improvement.