Explore the vast range of titles available.

An 8 MW wind turbine is described in terms of mass distribution, dimensions, power curve, thrust curve, maximum design load and tower configuration. This turbine has been described as part of the EU FP7 project LEANWIND in order to facilitate research into logistics and naval architecture efficiencies for future offshore wind installations. The design of this 8 MW reference wind turbine has been checked and validated by the design consultancy DNV-GL. This turbine description is intended to bridge the gap between the NREL 5 MW and DTU 10 reference turbines and thus contribute to the standardisation of research and development activities in the offshore wind energy industry.

An in-depth study has been completed to study the effects of slender, flexible blades in combination with high rotor speed operation on load mitigation, targeted at cost reductions of the structural components of large wind turbines, consequently lowering the levelized cost of energy. An overview of existing theory of sensitivity of turbine fatigue loading to the blade chord and rotor speed was created, and this was supplemented by a proposed theory for above-rated operation including the pitch controller. A baseline jacket-supported offshore turbine (7MW) was defined, of which the blade was then redesigned to be more slender and flexible, at the same time increasing rotor speed. The blade redesign and optimisation process was guided by cost of energy assessments using a reduced loadset. Thereafter, a full loadset conform IEC61400-3 was calculated for both turbines. The expected support structure load reductions were affirmed, and it was shown that reductions of up to 18.5 % are possible for critical load components. Cost modelling indicated that turbine and support structure CapEx could be reduced by 6%. Despite an energy production reduction of 0.44% related to the thicker airfoils used, the blade redesign led to a reduction in Cost of Energy.

An in-depth study has been completed to study the effects of slender, flexible blades in combination with high rotor speed operation on load mitigation, targeted at cost reductions of the structural components of large wind turbines, consequently lowering the levelized cost of energy. An overview of existing theory of sensitivity of turbine fatigue loading to the blade chord and rotor speed was created, and this was supplemented by a proposed theory for aboverated operation including the pitch controller. A baseline jacket-supported offshore turbine (7 MW) was defined, of which the blade was then redesigned to be more slender and flexible, at the same time increasing rotor speed. The blade redesign and optimisation process was guided by cost of energy assessments using a reduced loadset. Thereafter, a full loadset conform IEC61400-3 was calculated for both turbines. The expected support structure load reductions were affirmed, and it was shown that reductions of up to 18.5% are possible for critical load components. Cost modelling indicated that turbine and support structure CapEx could be reduced by 6%. Despite an energy production reduction of 0.44% related to the thicker airfoils used, the blade redesign led to a reduction in Cost of Energy.