Explore the vast range of titles available.

Residue co-evolution has become the primary principle for estimating inter-residue distances of a protein, which are crucially important for predicting protein structure. Most existing approaches adopt an indirect strategy, i.e., inferring residue co-evolution based on some hand-crafted features, say, a covariance matrix, calculated from multiple sequence alignment (MSA) of target protein. This indirect strategy, however, cannot fully exploit the information carried by MSA. Here, we report an end-to-end deep neural network, CopulaNet, to estimate residue co-evolution directly from MSA. The key elements of CopulaNet include: (i) an encoder to model context-specific mutation for each residue; (ii) an aggregator to model residue co-evolution, and thereafter estimate inter-residue distances. Using CASP13 (the 13th Critical Assessment of Protein Structure Prediction) target proteins as representatives, we demonstrate that CopulaNet can predict protein structure with improved accuracy and efficiency. This study represents a step toward improved end-to-end prediction of inter-residue distances and protein tertiary structures. Protein structure prediction is a challenge. A new deep learning framework, CopulaNet, is a major step forward toward end-to-end prediction of inter-residue distances and protein tertiary structures with improved accuracy and efficiency.

Methicillin-resistant Staphylococcus aureus (MRSA) exemplifies high-level antibiotic resistance in this major human pathogen. Its resistance to chloramphenicol is majorly conferred by enzymatic inactivation via chloramphenicol acetyltransferases (CATs). This modification sterically blocks the antibiotic’s ribosomal binding and thus neutralizes its inhibitory potency. Although CATs have been structurally studied across diverse bacteria species, the structures of S. aureus CATs (saCATs) have remained uncharacterized. To address this gap and elucidate species-specific resistance mechanisms, we determined the first high-resolution crystal structure of saCAT1, the prototypical saCAT enzyme. Structural analysis delineates the active site architecture and reveals the molecular basis for substrate recognition of both chloramphenicol and fusidic acid (FA). Further enzymatic assays demonstrated that the K m value against chloramphenicol is 16.9 µM, and the K i value of the inhibitor FA is 83.7 µM, indicating that the inhibitory capacity of FA is relatively limited. These findings provide an essential structural framework for understanding chloramphenicol resistance in S. aureus and facilitate the rational design of novel antimicrobial strategies to combat multidrug-resistant pathogens.

G-protein coupled receptors (GPCRs), the largest family of membrane proteins in human body, involve a great variety of biological processes and thus have become highly valuable drug targets. By binding with ligands (e.g., drugs), GPCRs switch between active and inactive conformational states, thereby performing functions such as signal transmission. The changes in binding pockets under different states are important for a better understanding of drug-target interactions. Therefore it is critical, as well as a practical need, to obtain binding sites in human GPCR structures. We report a database (called GPCR-BSD) that collects 127,990 predicted binding sites of 803 GPCRs under active and inactive states (thus 1,606 structures in total). The binding sites were identified from the predicted GPCR structures by executing three geometric-based pocket prediction methods, fpocket, CavityPlus and GHECOM. The server provides query, visualization, and comparison of the predicted binding sites for both GPCR predicted and experimentally determined structures recorded in PDB. We evaluated the identified pockets of 132 experimentally determined human GPCR structures in terms of pocket residue coverage, pocket center distance and redocking accuracy. The evaluation showed that fpocket and CavityPlus methods performed better and successfully predicted orthosteric binding sites in over 60% of the 132 experimentally determined structures. The GPCR Binding Site database is freely accessible at https://gpcrbs.bigdata.jcmsc.cn . This study not only provides a systematic evaluation of the commonly-used fpocket and CavityPlus methods for the first time but also meets the need for binding site information in GPCR studies.

Pseudoknots are key structure motifs of RNA and pseudoknotted RNAs play important roles in a variety of biological processes. Here, we present KnotFold, an accurate approach to the prediction of RNA secondary structure including pseudoknots. The key elements of KnotFold include a learned potential function and a minimum-cost flow algorithm to find the secondary structure with the lowest potential. KnotFold learns the potential from the RNAs with known structures using an attention-based neural network, thus avoiding the inaccuracy of hand-crafted energy functions. The specially designed minimum-cost flow algorithm used by KnotFold considers all possible combinations of base pairs and selects from them the optimal combination. The algorithm breaks the restriction of nested base pairs required by the widely used dynamic programming algorithms, thus enabling the identification of pseudoknots. Using 1,009 pseudoknotted RNAs as representatives, we demonstrate the successful application of KnotFold in predicting RNA secondary structures including pseudoknots with accuracy higher than the state-of-the-art approaches. We anticipate that KnotFold, with its superior accuracy, will greatly facilitate the understanding of RNA structures and functionalities. Presenting KnotFold, an application for accurately predicting RNA secondary structures, including pseudoknots.

Background Accurate prediction of protein tertiary structures is highly desired as the knowledge of protein structures provides invaluable insights into protein functions. We have designed two approaches to protein structure prediction, including a template-based modeling approach (called ProALIGN) and an ab initio prediction approach (called ProFOLD). Briefly speaking, ProALIGN aligns a target protein with templates through exploiting the patterns of context-specific alignment motifs and then builds the final structure with reference to the homologous templates. In contrast, ProFOLD uses an end-to-end neural network to estimate inter-residue distances of target proteins and builds structures that satisfy these distance constraints. These two approaches emphasize different characteristics of target proteins: ProALIGN exploits structure information of homologous templates of target proteins while ProFOLD exploits the co-evolutionary information carried by homologous protein sequences. Recent progress has shown that the combination of template-based modeling and ab initio approaches is promising. Results In the study, we present FALCON2, a web server that integrates ProALIGN and ProFOLD to provide high-quality protein structure prediction service. For a target protein, FALCON2 executes ProALIGN and ProFOLD simultaneously to predict possible structures and selects the most likely one as the final prediction result. We evaluated FALCON2 on widely-used benchmarks, including 104 CASP13 (the 13th Critical Assessment of protein Structure Prediction) targets and 91 CASP14 targets. In-depth examination suggests that when high-quality templates are available, ProALIGN is superior to ProFOLD and in other cases, ProFOLD shows better performance. By integrating these two approaches with different emphasis, FALCON2 server outperforms the two individual approaches and also achieves state-of-the-art performance compared with existing approaches. Conclusions By integrating template-based modeling and ab initio approaches, FALCON2 provides an easy-to-use and high-quality protein structure prediction service for the community and we expect it to enable insights into a deep understanding of protein functions.

Background Optical maps record locations of specific enzyme recognition sites within long genome fragments. This long-distance information enables aligning genome assembly contigs onto optical maps and ordering contigs into scaffolds. The generated scaffolds, however, often contain a large amount of gaps. To fill these gaps, a feasible way is to search genome assembly graph for the best-matching contig paths that connect boundary contigs of gaps. The combination of searching and evaluation procedures might be “searching followed by evaluation”, which is infeasible for long gaps, or “searching by evaluation”, which heavily relies on heuristics and thus usually yields unreliable contig paths. Results We here report an accurate and efficient approach to filling gaps of genome scaffolds with aids of optical maps. Using simulated data from 12 species and real data from 3 species, we demonstrate the successful application of our approach in gap filling with improved accuracy and completeness of genome scaffolds. Conclusion Our approach applies a sequential Bayesian updating technique to measure the similarity between optical maps and candidate contig paths. Using this similarity to guide path searching, our approach achieves higher accuracy than the existing “searching by evaluation” strategy that relies on heuristics. Furthermore, unlike the “searching followed by evaluation” strategy enumerating all possible paths, our approach prunes the unlikely sub-paths and extends the highly-probable ones only, thus significantly increasing searching efficiency.

Background The formation of contacts among protein secondary structure elements (SSEs) is an important step in protein folding as it determines topology of protein tertiary structure; hence, inferring inter-SSE contacts is crucial to protein structure prediction. One of the existing strategies infers inter-SSE contacts directly from the predicted possibilities of inter-residue contacts without any preprocessing, and thus suffers from the excessive noises existing in the predicted inter-residue contacts. Another strategy defines SSEs based on protein secondary structure prediction first, and then judges whether each candidate SSE pair could form contact or not. However, it is difficult to accurately determine boundary of SSEs due to the errors in secondary structure prediction. The incorrectly-deduced SSEs definitely hinder subsequent prediction of the contacts among them. Results We here report an accurate approach to infer the inter-SSE contacts (thus called as ISSEC) using the deep object detection technique. The design of ISSEC is based on the observation that, in the inter-residue contact map, the contacting SSEs usually form rectangle regions with characteristic patterns. Therefore, ISSEC infers inter-SSE contacts through detecting such rectangle regions. Unlike the existing approach directly using the predicted probabilities of inter-residue contact, ISSEC applies the deep convolution technique to extract high-level features from the inter-residue contacts. More importantly, ISSEC does not rely on the pre-defined SSEs. Instead, ISSEC enumerates multiple candidate rectangle regions in the predicted inter-residue contact map, and for each region, ISSEC calculates a confidence score to measure whether it has characteristic patterns or not. ISSEC employs greedy strategy to select non-overlapping regions with high confidence score, and finally infers inter-SSE contacts according to these regions. Conclusions Comprehensive experimental results suggested that ISSEC outperformed the state-of-the-art approaches in predicting inter-SSE contacts. We further demonstrated the successful applications of ISSEC to improve prediction of both inter-residue contacts and tertiary structure as well.

Accurate prediction of peptide spectra is crucial for improving the efficiency and reliability of proteomic analysis, as well as for gaining insight into various biological processes. In this study, we introduce Deep MS Simulator (DMSS), a novel attention-based model tailored for forecasting theoretical spectra in mass spectrometry. DMSS has undergone rigorous validation through a series of experiments, consistently demonstrating superior performance compared to current methods in forecasting theoretical spectra. The superior ability of DMSS to distinguish extremely similar peptides highlights the potential application of incorporating our predicted intensity information into mass spectrometry search engines to enhance the accuracy of protein identification. These findings contribute to the advancement of proteomics analysis and highlight the potential of the DMSS as a valuable tool in the field.

Background Tandem mass spectrometry (MS/MS) acts as a key technique for peptide identification. The MS/MS-based peptide identification approaches can be categorized into two families, namely, de novo and database search. Both of the two types of approaches can benefit from an accurate prediction of theoretical spectrum. A theoretical spectrum consists of m / z and intensity of possibly occurring ions, which are estimated via simulating the spectrum generating process. Extensive researches have been conducted for theoretical spectrum prediction; however, the prediction methods suffer from low prediciton accuracy due to oversimplifications in the spectrum simulation process. Results In the study, we present an open-source software package, called OpenMS-Simulator, to predict theoretical spectrum for a given peptide sequence. Based on the mobile-proton hypothesis for peptide fragmentation, OpenMS-Simulator trained a closed-form model for the intensity ratio of adjacent y ions, from which the whole theoretical spectrum can be constructed. On a collection of representative spectra datasets with annotated peptide sequences, experimental results suggest that OpenMS-Simulator can predict theoretical spectra with considerable accuracy. The study also presents an application of OpenMS-Simulator: the similarity between theoretical spectra and query spectra can be used to re-rank the peptide sequence reported by SEQUEST/X!Tandem. Conclusions OpenMS-Simulator implements a novel model to predict theoretical spectrum for a given peptide sequence. Compared with existing theoretical spectrum prediction tools, say MassAnalyzer and MSSimulator, our method not only simplifies the computation process, but also improves the prediction accuracy. Currently, OpenMS-Simulator supports the prediction of CID and HCD spectrum for peptides with double charges. The extension to cover more fragmentation models and support multiple-charged peptides remains as one of the future works.

Background Accurate prediction of inter-residue contacts of a protein is important to calculating its tertiary structure. Analysis of co-evolutionary events among residues has been proved effective in inferring inter-residue contacts. The Markov random field (MRF) technique, although being widely used for contact prediction, suffers from the following dilemma: the actual likelihood function of MRF is accurate but time-consuming to calculate; in contrast, approximations to the actual likelihood, say pseudo-likelihood, are efficient to calculate but inaccurate. Thus, how to achieve both accuracy and efficiency simultaneously remains a challenge. Results In this study, we present such an approach (called clmDCA) for contact prediction. Unlike plmDCA using pseudo-likelihood, i.e., the product of conditional probability of individual residues, our approach uses composite-likelihood, i.e., the product of conditional probability of all residue pairs. Composite likelihood has been theoretically proved as a better approximation to the actual likelihood function than pseudo-likelihood. Meanwhile, composite likelihood is still efficient to maximize, thus ensuring the efficiency of clmDCA. We present comprehensive experiments on popular benchmark datasets, including PSICOV dataset and CASP-11 dataset, to show that: i ) clmDCA alone outperforms the existing MRF-based approaches in prediction accuracy. i i ) When equipped with deep learning technique for refinement, the prediction accuracy of clmDCA was further significantly improved, suggesting the suitability of clmDCA for subsequent refinement procedure. We further present a successful application of the predicted contacts to accurately build tertiary structures for proteins in the PSICOV dataset. Conclusions Composite likelihood maximization algorithm can efficiently estimate the parameters of Markov Random Fields and can improve the prediction accuracy of protein inter-residue contacts.