Explore the vast range of titles available.

Although the body of scientific publications on energy efficiency and climate mitigation from buildings has been growing quickly in recent years, very few previous bibliometric analysis studies exist that analyze the literature in terms of specific content (trends or options for zero-energy buildings) or coverage of different scientific databases. We evaluate the scientific literature published since January 2013 concerning alternative methods for improving the energy efficiency and mitigating climate impacts from buildings. We quantify and describe the literature through a bibliometric approach, comparing the databases Web of Science (WoS) and Scopus. A total of 19,416 (Scopus) and 17,468 (WoS) publications are analyzed, with only 11% common documents. The literature has grown steadily during this time period, with a peak in the year 2017. Most of the publications are in English, in the area of Engineering and Energy Fuels, and from institutions from China and the USA. Strong links are observed between the most published authors and institutions worldwide. An analysis of keywords reveals that most of research focuses on technologies for heating, ventilation, and air-conditioning, phase change materials, as well as information and communication technologies. A significantly smaller segment of the literature takes a broader perspective (greenhouse gas emissions, life cycle, and sustainable development), investigating implementation issues (policies and costs) or renewable energy (solar). Knowledge gaps are detected in the areas of behavioral changes, the circular economy, and some renewable energy sources (geothermal, biomass, small wind). We conclude that (i) the contents of WoS and Scopus are radically different in the studied fields; (ii) research seems to focus on technological aspects; and (iii) there are weak links between research on energy and on climate mitigation and sustainability, the latter themes being misrepresented in the literature. These conclusions should be validated with further analyses of the documents identified in this study. We recommend that future research focuses on filling the above identified gaps, assessing the contents of several scientific databases, and extending energy analyses to their effects in terms of mitigation potentials.

Electrical energy storage systems have a fundamental role in the energy transition process supporting the penetration of renewable energy sources into the energy mix. Compressed air energy storage (CAES) is a promising energy storage technology, mainly proposed for large-scale applications, that uses compressed air as an energy vector. Although the first document in literature on CAES appeared in 1976 and the first commercial plant was installed in 1978, this technology started to gain attention only in the decade 2000–2010, with remarkable scientific production output and the realization of other pre-commercial demonstrators and commercial plants. This study applies bibliometric techniques to draw a picture of the current status of the scientific progress and analyze the trend of the research on CAES and identify research gaps that can support researchers and manufacturers involved in this entering technology. Recent trends of research include aspects related to the off-design, the development of thermal energy storage for adiabatic CAES, and the integration of CAES with combined heating and cooling systems.

Concentrating solar power plants use sensible thermal energy storage, a mature technology based on molten salts, due to the high storage efficiency (up to 99%). Both parabolic trough collectors and the central receiver system for concentrating solar power technologies use molten salts tanks, either in direct storage systems or in indirect ones. But even though this is a mature technology, it still shows challenges in its implementation and operation. This paper underscores the critical importance of stringent design criteria for molten salt tanks in thermal storage technology. Focusing on the potential ramifications of design failures, the study explores various dimensions where an inadequate design can lead to severe consequences, even jeopardizing the viability of the entire technology. Key areas discussed include structural integrity, corrosion, thermal shock, thermal expansions, and others. By elucidating the multifaceted risks associated with design shortcomings, this paper aims to emphasize the necessity of thorough reviews and adherence to robust design principles for ensuring the success, safety, and sustainability of thermal storage technology.

In recent years, the urgent necessity and tremendous opportunity to accelerate the transition to a low-carbon competitive economy has resulted in growth of long-term targets for renewable energy and energy efficiency, which are coming from policy bodies worldwide. The inherent distributed nature of renewable energies, together with the modularity of those technologies, brings opportunities for consumer empowerment in terms of participation. Nevertheless, there is still the need for increasing global awareness and enabling policies, to strengthen the citizen role in the energy system, facilitating their proactive participation as renewable energy purchasers, investors, and clean energy producers. Drawing from research interviews and the academic literature, this article conceptualizes the understanding of the need for improving public attitudes and explores the factors influencing the acceptance in terms of misconceptions, best communication practices, activities addressing public concerns, and potential actions to bolster public support towards renewable energy. Research interviews were conducted at a technical workshop on social acceptance of renewable energy, held in Abu Dhabi in October 2013, and the findings show that despite detecting an increasing trend towards greater and more active participation of citizens, many misconceptions together with insufficient and inefficient awareness and communication initiatives on renewable energies persist. The main conclusions can be used as a basis for formulating sustainable energy communication and awareness campaigns in order to enhance public acceptance and increase active participation in renewable energy technologies.

This book presents a fully updated comprehensive analysis of thermal energy storage systems (TES) including all major advances and developments since the first edition published. This very successful publication provides readers with all the information related to TES in one resource, along with a variety of applications across the energy/power and construction sectors, as well as, new to this edition, the transport industry. After an introduction to TES systems, editor and her team of expert authors consider the source, design and operation of the use of water, molten salts, concrete, aquifers, boreholes and a variety of phase-change materials for TES systems, before analyzing and simulating underground TES systems. This edition benefits from 5 new chapters covering the most advanced technologies including sorption systems, thermodynamic and dynamic modelling as well as applications to the transport industry and the environmental and economic aspects of TES.

Thermal energy storage (TES) technologies store thermal energy (both heat and cold) for later use as required, rather than at the time of production. They are therefore important counterparts to various intermittent renewable energy generation methods and also provide a way of valorising waste process heat and reducing the energy demand of buildings. This book provides an authoritative overview of this key area. Part one reviews sensible heat storage technologies. Part two covers latent and thermochemical heat storage respectively. The final section addresses applications in heating and energy systems.

According to the Intergovernmental Panel on Climate Change (IPCC) 5th Assessment report, energy-efficient appliances can reduce global electricity consumption even though there is an expected increase in the number and ownership of appliances. The International Energy Agency (IEA) expects a high increase in energy efficiency in traditional appliances (refrigerators, washing machines, television, etc.), and in the number of new appliances installed (also called plug loads). The bibliometric study of publications related to energy-efficient appliances carried out in this paper shows that research on this topic is growing in developed regions (North America and Europe) and even more in some developing regions (Asia Pacific) with a high emphasis on China and India. The results indicate that, in general, policies are always implemented before the core of publications on the topic, with time spans ranging from 3 to 30 years. However, the trend seems to be changing with publications related to new appliances where the core research happens shortly after or in parallel to the establishment of policies.

In order to reduce greenhouse gas emissions, current and future energy systems need to be made more efficient and sustainable. This change can be accomplished by increasing the penetration of renewable energy sources and using efficient technologies in energy generation systems. One way to improve the operation of the whole energy system is through the generation and end-use sector coupling. Power-to-heat energy conversion and storage technologies, in this view, are enabling technologies that can help in balancing and improving the efficiency of both thermal and electric grids. In the present paper, a comprehensive analysis of the role of heat pumps and thermal energy storage for sector coupling is presented. The main features of the analyzed technologies are presented in the context of smart electric grid, district heating and cooling and multi-carrier energy systems, and recent findings and developments are highlighted. Finally, the technical, social, and economic challenges in the adoption of investigated technologies are discussed.

The implementation of thermal energy storage systems using phase change materials to support the integration of renewable energies is a key element that allows reducing the energy consumption in buildings by increasing self-consumption and system efficiency. The selection of the most suitable phase change material is an important part of the successful implementation of the thermal energy storage system. The aim of this paper is to present the methodology used to assess the suitability of potential phase change materials to be used in two innovative energy storage systems, one of them being mainly intended to provide cooling, while the other provides heating and domestic hot water to residential buildings. The selection methodology relies on a qualitative decision matrix, which uses some common features of phase change materials to assign an overall score to each material that should allow comparing the different options. Experimental characterization of the best candidates was also performed to help in making a final decision. The results indicate some of the most suitable candidates for both systems, with RT4 being the most promising commercial phase change material for the system designed to provide cooling, while for the system designed to provide heating and domestic hot water, the most promising candidate is RT64HC, another commercial product.

The increasing penetration of renewable energy has led electrical energy storage systems to have a key role in balancing and increasing the efficiency of the grid. Liquid air energy storage (LAES) is a promising technology, mainly proposed for large scale applications, which uses cryogen (liquid air) as energy vector. Compared to other similar large-scale technologies such as compressed air energy storage or pumped hydroelectric energy storage, the use of liquid air as a storage medium allows a high energy density to be reached and overcomes the problem related to geological constraints. Furthermore, when integrated with high-grade waste cold/waste heat resources such as the liquefied natural gas regasification process and hot combustion gases discharged to the atmosphere, LAES has the capacity to significantly increase the round-trip efficiency. Although the first document in the literature on the topic of LAES appeared in 1974, this technology has gained the attention of many researchers around the world only in recent years, leading to a rapid increase in a scientific production and the realization of two system prototype located in the United Kingdom (UK). This study aims to report the current status of the scientific progress through a bibliometric analysis, defining the hotspots and research trends of LAES technology. The results can be used by researchers and manufacturers involved in this entering technology to understand the state of art, the trend of scientific production, the current networks of worldwide institutions, and the authors connected through the LAES. Our conclusions report useful advice for the future research, highlighting the research trend and the current gaps.