Explore the vast range of titles available.

Based on the geometry of the codimension-2 surface in general spherically symmetric spacetime, we give a quasi-local definition of a photon sphere as well as a photon surface. This new definition is the generalization of the one provided by Claudel, Virbhadra, and Ellis but without referencing any umbilical hypersurface in the spacetime. The new definition effectively excludes the photon surface in spacetime without gravity. The application of the definition to the Lemaître–Tolman–Bondi (LTB) model of gravitational collapse reduces to a second order differential equation problem. We find that the energy balance on the boundary of the dust ball can provide one of the appropriate boundary conditions to this equation. Based on this crucial investigation, we find an analytic photon surface solution in the Oppenheimer–Snyder (OS) model and reasonable numerical solutions for the marginally bounded collapse in the LTB model. Interestingly, in the OS model, we find that the time difference between the occurrence of the photon surface and the event horizon is mainly determined by the total mass of the system but not the size or the strength of the gravitational field of the system.

Breast cancer is the most common cancer in women worldwide. Accurate early diagnosis of breast cancer is critical in the management of the disease. Although mammogram screening has been widely used for breast cancer screening, high false-positive and false-negative rates and radiation from mammography have always been a concern. Over the last 20 years, the emergence of “omics” strategies has resulted in significant advances in the search for non-invasive biomarkers for breast cancer diagnosis at an early stage. Circulating carcinoma antigens, circulating tumor cells, circulating cell-free tumor nucleic acids (DNA or RNA), circulating microRNAs, and circulating extracellular vesicles in the peripheral blood, nipple aspirate fluid, sweat, urine, and tears, as well as volatile organic compounds in the breath, have emerged as potential non-invasive diagnostic biomarkers to supplement current clinical approaches to earlier detection of breast cancer. In this review, we summarize the current progress of research in these areas.

Rationally constructing atom‐precise active sites is highly important to promote their catalytic performance but still challenging. Herein, this work designs and constructs ZSM‐5 supported Cu and Ag dual single atoms as a proof‐of‐concept catalyst (Ag 1 −Cu 1 /ZSM‐5 hetero‐SAC (single‐atom catalyst)) to boost direct oxidation of methane (DOM) by H 2 O 2 . The Ag 1 −Cu 1 /ZSM‐5 hetero‐SAC synthesized via a modified co‐adsorption strategy yields a methanol productivity of 20,115 µmol g cat −1 with 81% selectivity at 70 °C within 30 min, which surpasses most of the state‐of‐the‐art noble metal catalysts. The characterization results prove that the synergistic interaction between silver and copper facilitates the formation of highly reactive surface hydroxyl species to activate the C−H bond as well as the activity, selectivity, and stability of DOM compared with SACs, which is the key to the enhanced catalytic performance. This work believes the atomic‐level design strategy on dual‐single‐atom active sites should pave the way to designing advanced catalysts for methane conversion.

To ensure the existence of a well defined linearized gravitational wave equation, we show that the spacetimes in the so-called “Einstein–Gauss–Bonnet gravity in four dimension” have to be locally conformally flat.

A bstract We study the P − V criticality and phase transition in the extended phase space of charged Gauss-Bonnet black holes in anti-de Sitter space, where the cosmological constant appears as a dynamical pressure of the system and its conjugate quantity is the thermodynamic volume of the black holes. The black holes can have a Ricci flat ( k  = 0), spherical ( k  = 1), or hyperbolic ( k  = −1) horizon. We find that for the Ricci flat and hyperbolic Gauss-Bonnet black holes, no P − V criticality and phase transition appear, while for the black holes with a spherical horizon, even when the charge of the black hole is absent, the P − V criticality and the small black hole/large black hole phase transition will appear, but it happens only in d  = 5 dimensions; when the charge does not vanish, the P − V criticality and the small black hole/large phase transition always appear in d  = 5 dimensions; in the case of d  ≥ 6, to have the P − V criticality and the small black hole/large black hole phase transition, there exists an upper bound for the parameter , where is the Gauss-Bonnet coefficient and Q is the charge of the black hole. We calculate the critical exponents at the critical point and find that for all cases, they are the same as those in the van der Waals liquid-gas system.

The essential oil of clove has a wide range of pharmacological and biological activities and is widely used in the medicine, fragrance and flavoring industries. In this work, 22 components of the essential oil obtained from clove buds were identified. Eugenol was the major component (76.23%). The essential oil exhibited strong antibacterial activity against Staphylococcus aureus ATCC 25923 with a minimum inhibitory concentration (MIC) of 0.625 mg/mL, and the antibacterial effects depended on its concentration and action time. Kill-time assays also confirmed the essential oil had a significant effect on the growth rate of surviving S. aureus. We hypothesized that the essential oil may interact with the cell wall and membrane first. On the one hand it destroys cell wall and membranes, next causing the losses of vital intracellular materials, which finally result in the bacterial death. Besides, essential oil penetrates to the cytoplasmic membrane or enters inside the cell after destruction of cell structure, and then inhibits the normal synthesis of DNA and proteins that are required for bacterial growth. These results suggested that the effects of the clove essential oil on the growth inhibition of S. aureus may be at the molecular level rather than only physical damage.

The use of anion redox reactions is gaining interest for increasing rechargeable capacities in alkaline ion batteries. Although anion redox coupling of S 2− and (S 2 ) 2− through dimerization of S–S in sulfides have been studied and reported, an anion redox process through electron hole formation has not been investigated to the best of our knowledge. Here, we report an O3-NaCr 2/3 Ti 1/3 S 2 cathode that delivers a high reversible capacity of ~186 mAh g −1 (0.95 Na) based on the cation and anion redox process. Various charge compensation mechanisms of the sulfur anionic redox process in layered NaCr 2/3 Ti 1/3 S 2 , which occur through the formation of disulfide-like species, the precipitation of elemental sulfur, S–S dimerization, and especially through the formation of electron holes, are investigated. Direct structural evidence for formation of electron holes and (S 2 ) n− species with shortened S–S distances is obtained. These results provide valuable information for the development of materials based on the anionic redox reaction. Anionic redox reactions are gaining interest as a means to optimize capacities of alkaline ion batteries. Here, the authors investigate various charge compensation mechanisms and report S–S dimerization and the formation of electron holes on sulfur in a model sulfide cathode.

Industrial application of overall water splitting requires developing readily available, highly efficient, and stable oxygen evolution electrocatalysts that can efficiently drive large current density. This study reports a facile and practical method to fabricate a non‐noble metal catalyst by directly growing a Co‐Fe Prussian blue analogue on a 3D porous conductive substrate, which is further phosphorized into a bifunctional Fe‐doped CoP (Fe‐CoP) electrocatalyst. The Fe‐CoP/NF (nickel foam) catalyst shows efficient electrocatalytic activity for oxygen evolution reaction, requiring low overpotentials of 190, 295, and 428 mV to achieve 10, 500, and 1000 mA cm−2 current densities in 1.0 m KOH solution. In addition, the Fe‐CoP/NF can also function as a highly active electrocatalyst for hydrogen evolution reaction with a low overpotential of 78 mV at 10 mA cm−2 current density in alkaline solution. Thus, the Fe‐CoP/NF electrode with meso/macropores can act as both an anode and a cathode to fabricate an electrolyzer for overall water splitting, only requiring a cell voltage of 1.49 V to afford a 10 mA cm−2 current density with remarkable stability. This performance appears to be among the best reported values and is much better than that of the IrO2‐Pt/C‐based electrolyzer. A gentle and practical pathway is reported to fabricate efficient, non‐noble metal catalyst by directly growing a bimetallic prussian blue analogue 3D conductive substrate, phosphorized into a 3D bifunctional hierarchical‐pore Fe‐CoP electrocatalyst. The as‐obtained Fe‐CoP can drive large‐current‐density oxygen evolution and efficiently catalyze overall water splitting.

Background Long non-coding RNAs (lncRNAs) possess significant regulatory functions in multiple biological and pathological processes, especially in cancer. Dysregulated lncRNAs in hepatocellular carcinoma (HCC) and their therapeutic applications remain unclear. Methods Differentially expressed lncRNA profile in HCC was constructed using TCGA data. LINC00958 expression level was examined in HCC cell lines and tissues. Univariate and multivariate analyses were performed to demonstrate the prognostic value of LINC00958. Loss-of-function and gain-of-function experiments were used to assess the effects of LINC00958 on cell proliferation, motility, and lipogenesis. Patient-derived xenograft model was established for in vivo experiments. RNA immunoprecipitation, dual luciferase reporter, biotin-labeled miRNA pull-down, fluorescence in situ hybridization, and RNA sequencing assays were performed to elucidate the underlying molecular mechanisms. We developed a PLGA-based nanoplatform encapsulating LINC00958 siRNA and evaluated its superiority for systemic administration. Results We identified a lipogenesis-related lncRNA, LINC00958, whose expression was upregulated in HCC cell lines and tissues. High LINC00958 level independently predicted poor overall survival. Functional assays showed that LINC00958 aggravated HCC malignant phenotypes in vitro and in vivo. Mechanistically, LINC00958 sponged miR-3619-5p to upregulate hepatoma-derived growth factor (HDGF) expression, thereby facilitating HCC lipogenesis and progression. METTL3-mediated N 6 -methyladenosine modification led to LINC00958 upregulation through stabilizing its RNA transcript. A PLGA-based nanoplatform loaded with si-LINC00958 was developed for HCC systemic administration. This novel drug delivery system was controlled release, tumor targeting, safe, and presented satisfactory antitumor efficacy. Conclusions Our results delineate the clinical significance of LINC00958 in HCC and the regulatory mechanisms involved in HCC lipogenesis and progression, providing a novel prognostic indicator and promising nanotherapeutic target.

Aqueous zinc-ion batteries (ZIBs) combine the benefits of metallic Zn anodes with those of aqueous electrolytes and are well suited for large-scale energy storage because of their inherent high safety, cost-effectiveness, and eco-friendliness. Currently, the practical application of such batteries is hindered by the poor cycling performance of Zn anodes due to uncontrolled dendrite formation and severe side reactions, although recent reports suggest that these problems can be mitigated through the modification of Zn anodes with metal-based materials. Given that the mechanisms of improving Zn deposition and the structural evolution of metal-based materials have not been systematically reviewed, we herein systematically overview the metal-based materials used to stabilize Zn anodes, starting with a brief summary of the anode working mechanism and the challenges faced by stabilized Zn anodes. Subsequently, the design principles of Zn anodes stabilized by metal-based materials and the related recent progress are reviewed, and the key challenges and perspectives for the future development of such Zn anodes are proposed. Graphical abstract