Explore the vast range of titles available.

This study aimed to evaluate the synthesis and application of heterogeneous catalysts based on heteropolyacids for 5-hydroxymethylfurfural (HMF) production from glucose. Initially, assays were carried out in order to establish the most favorable catalyst synthesis conditions. For such purpose, calcination temperature (300 or 500 °C), type of support (Nb2O5 or Al2O3), and active phase (H3PW12O40—HPW or H3PMo12O40—HPMo) were tested and combined based on Taguchi’s L8 orthogonal array. As a result, HPW-Nb2O5 calcined at 300 °C was selected as it presented optimal HMF production performance (9.5% yield). Subsequently, the reaction conditions capable of maximizing HMF production from glucose using the selected catalyst were established. In these experiments, different temperatures (160 or 200 °C), acetone-to-water ratios (1:1 or 3:1 v/v), glucose concentrations (50 or 100 g/L), and catalyst concentrations (1 or 5% w/v) were evaluated according to a Taguchi’s L16 experimental design. The conditions that resulted in the highest HMF yield (40.8%) consisted of using 50 g/L of glucose at 160 °C, 1:1 (v/v) acetone-to-water ratio, and catalyst concentration of 5% (w/v). Recycling tests revealed that the catalyst can be used in four runs, which results in the same HMF yield (approx. 40%).

An increase in global energy demand has caused oil prices to reach record levels in recent times. High oil prices together with concerns over CO2 emissions have resulted in renewed interest in renewable energy. Nowadays, ethanol is the principal renewable biofuel. However, the industrial need for increased productivity, wider substrate range utilization, and the production of novel compounds leads to renewed interest in further extending the use of current industrial strains by exploiting the immense, and still unknown, potential of natural yeast strains. This review seeks to answer the following questions: (a) which characteristics should S. cerevisiae have for the current production of first- and second-generation ethanol? (b) Why are alcohol-tolerance and thermo-tolerance characteristics required? (c) Which genes are related to these characteristics? (d) What are the advances that can be achieved with the isolation of new organisms from the environment?

2,5-Furandicarboxylic acid (FDCA) is a bio-based platform chemical with high potential to replace terephthalic acid in polymer production, particularly for polyethylene furanoate (PEF), a biopolymer with superior thermal and barrier properties. This study investigates the selective oxidation of 5-hydroxymethylfurfural (HMF) into FDCA using nickel-based heterogeneous catalysts, aiming at a cost-effective and sustainable alternative to noble metal catalysts. A series of nickel oxide catalysts were synthesized and screened. The NiOx catalyst synthesized without thermal treatment via Route B showed the best performance, achieving a FDCA yield of 11.77%, selectivity of 27.41%, and concentration of 0.9 g/L under preliminary conditions. Reaction kinetics revealed that the controlled addition of NaClO enhanced FDCA yield by 2.28 times. Optimization using a 23 factorial design identified the optimal conditions as 6% (w/v) catalyst concentration, 25 °C, and a NaClO:HMF molar ratio of 12:1, leading to 34.14% yield and 42.57% selectivity. The NiOx catalyst maintained its activity over five successive cycles, indicating good recyclability. Moreover, NiOx demonstrated catalytic activity with crude HMF derived from glucose dehydration, confirming its practical applicability. These results support the potential of nickel-based catalysts in sustainable FDCA production, contributing to the advancement of bio-based polymer synthesis.

This study aimed to select the best reaction conditions to produce 5-hydroxymethylfurfural (HMF) from cellulose using heterogeneous catalyst based on a heteropolyacid (H3PW12O40—HPW) and Nb2O5. Initially, the influence of the temperature (160 or 200 °C), acetone:water ratio (50:50 or 75:25 v/v), cellulose load (5% or 10% w/v) and catalyst concentration (1% or 5% w/v) on HMF production from cellulose was evaluated through a Taguchi’s L16 screening experimental design. Afterwards, the main variables affecting this process, namely the temperature (160–240 °C) and acetone:water ratio (60:40–90:10 v/v), were optimized using a central composite rotatable design. Next, a kinetic study on HMF production from cellulose was carried out. Finally, HMF production from cellulose obtained from different biomass sources was evaluated. It was found that the reaction conditions able to result in maximum HMF yield, i.e., around 20%, were 200 °C, acetone:water ratio of 75:25 (v/v), 10% w/v of cellulose, and 5% w/v of catalyst concentration. The kinetic study revealed that the Langmuir–Hinshelwood–Hougen–Watson approach fit to the experimental data. Under the optimized conditions, the catalyst HPW/Nb2O5 was also effective in converting different sources of cellulose into HMF.

Doc number: 23 Abstract Background: The use of lignocellulosic constituents in biotechnological processes requires a selective separation of the main fractions (cellulose, hemicellulose and lignin). During diluted acid hydrolysis for hemicellulose extraction, several toxic compounds are formed by the degradation of sugars and lignin, which have ability to inhibit microbial metabolism. Thus, the use of a detoxification step represents an important aspect to be considered for the improvement of fermentation processes from hydrolysates. In this paper, we evaluated the application of Advanced Oxidative Processes (AOPs) for the detoxification of rice straw hemicellulosic hydrolysate with the goal of improving ethanol bioproduction by Pichia stipitis yeast. Aiming to reduce the toxicity of the hemicellulosic hydrolysate, different treatment conditions were analyzed. The treatments were carried out according to a Taguchi L16 orthogonal array to evaluate the influence of Fe+2 , H2 O2 , UV, O3 and pH on the concentration of aromatic compounds and the fermentative process. Results: The results showed that the AOPs were able to remove aromatic compounds (furan and phenolic compounds derived from lignin) without affecting the sugar concentration in the hydrolysate. Ozonation in alkaline medium (pH 8) in the presence of H2 O2 (treatment A3) or UV radiation (treatment A5) were the most effective for hydrolysate detoxification and had a positive effect on increasing the yeast fermentability of rice straw hemicellulose hydrolysate. Under these conditions, the higher removal of total phenols (above 40%), low molecular weight phenolic compounds (above 95%) and furans (above 52%) were observed. In addition, the ethanol volumetric productivity by P. stipitis was increased in approximately twice in relation the untreated hydrolysate. Conclusion: These results demonstrate that AOPs are a promising methods to reduce toxicity and improve the fermentability of lignocellulosic hydrolysates.

Background Electroencephalography (EEG) is a promising tool for identifying the physiological biomarkers of fibromyalgia (FM). Evidence suggests differences in power band and density between individuals with FM and healthy controls. EEG changes appear to be associated with pain intensity; however, their relationship with the quality of pain has not been examined. We aimed to investigate whether abnormal EEG in the frontal and central points of the 10–20 EEG system in individuals with FM is associated with pain’s sensory-discriminative and affective-motivational dimensions. The association between EEG and the two dimensions of emotional disorders (depression and anxiety) was also investigated. Methods In this cross-sectional pilot study, pain experience (pain rating index [PRI]) and two dimensions of emotional disorders (depression and anxiety) were assessed using the McGill Pain Questionnaire (PRI-sensory and PRI-affective) and Hospital Anxiety and Depression Scale (HADS), respectively. In quantitative EEG analysis, the relative spectral power of each frequency band (delta, theta, alpha, and beta) was identified in the frontal and central points during rest. Results A negative correlation was found between the relative spectral power for the delta bands in the frontal ( r = -0.656; p  = 0.028) and central points ( r = -0.624; p  = 0.040) and the PRI-affective scores. A positive correlation was found between the alpha bands in the frontal ( r  = 0.642; p  = 0.033) and central points ( r  = 0.642; p  = 0.033) and the PRI-affective scores. A negative correlation between the delta bands in the central points and the anxiety subscale of the HADS ( r = -0.648; p  = 0.031) was detected. Conclusion The affective-motivational dimension of pain and mood disorders may be related to abnormal patterns of electrical activity in patients with FM. Trial registration Retrospectively registered on ClinicalTrials.gov (NCT05962658).

Most eukaryotic cells contain varying amounts of cytosolic lipidic inclusions termed lipid bodies (LBs) or lipid droplets (LDs). In mammalian cells, such as macrophages, these lipid-rich organelles are formed in response to host-pathogen interaction during infectious diseases and are sites for biosynthesis of arachidonic acid (AA)-derived inflammatory mediators (eicosanoids). Less clear are the functions of LBs in pathogenic lower eukaryotes. In this study, we demonstrated that LBs, visualized by light microscopy with different probes and transmission electron microscopy (TEM), are produced in trypomastigote forms of the parasite Trypanosoma cruzi, the causal agent of Chagas' disease, after both host interaction and exogenous AA stimulation. Quantitative TEM revealed that LBs from amastigotes, the intracellular forms of the parasite, growing in vivo have increased size and electron-density compared to LBs from amastigotes living in vitro. AA-stimulated trypomastigotes released high amounts of prostaglandin E2 (PGE2) and showed PGE2 synthase expression. Raman spectroscopy demonstrated increased unsaturated lipid content and AA incorporation in stimulated parasites. Moreover, both Raman and MALDI mass spectroscopy revealed increased AA content in LBs purified from AA-stimulated parasites compared to LBs from unstimulated group. By using a specific technique for eicosanoid detection, we immunolocalized PGE2 within LBs from AA-stimulated trypomastigotes. Altogether, our findings demonstrate that LBs from the parasite Trypanosoma cruzi are not just lipid storage inclusions but dynamic organelles, able to respond to host interaction and inflammatory events and involved in the AA metabolism. Acting as sources of PGE2, a potent immunomodulatory lipid mediator that inhibits many aspects of innate and adaptive immunity, newly-formed parasite LBs may be implicated with the pathogen survival in its host.

The objective of this study was to evaluate the preoperative anxiety of hospitalized patients exposed to Spiritist \"passe,\" laying on of hand with the intention of healing (Sham) and without laying on of hand. Other variables as depression, pain, physiological parameters, muscle tension, and well-being were assessed. Patients in the Spiritist \"passe\" intervention group showed greater reductions in anxiety (p<0.05) and muscle tension (p<0.01) and increases in well-being (p<0.01). More marked reductions in preoperative anxiety and muscle tension and improvement in wellbeing were observed in patients exposed to Spiritist \"passe\" compared to Sham or standard medical care.

The emergence of the COVID-19 pandemic resulted in an unprecedented need for RT-qPCR-based molecular diagnostic testing, placing a strain on the supply chain and the availability of commercially available PCR testing kits and reagents. The effect of limited molecular diagnostics-related supplies has been felt across the globe, disproportionally impacting molecular diagnostic testing in developing countries where acquisition of supplies is limited due to availability. The increasing global demand for commercial molecular diagnostic testing kits and reagents has made standard PCR assays cost prohibitive, resulting in the development of alternative approaches to detect SARS-CoV-2 in clinical specimens, circumventing the need for commercial diagnostic testing kits while mitigating the high-demand for molecular diagnostics testing. The timely availability of the complete SARS-CoV-2 genome in the beginning of the COVID-19 pandemic facilitated the rapid development and deployment of specific primers and standardized laboratory protocols for the molecular diagnosis of COVID-19. An alternative method offering a highly specific manner of detecting and genotyping pathogens within clinical specimens is based on the melting temperature differences of PCR products. This method is based on the melting temperature differences between purine and pyrimidine bases. Here, RT-qPCR assays coupled with a High Resolution Melting analysis (HRM-RTqPCR) were developed to target different regions of the SARS-CoV-2 genome (RdRp, E and N) and an internal control (human RNAse P gene). The assays were validated using synthetic sequences from the viral genome and clinical specimens (nasopharyngeal swabs, serum and saliva) of sixty-five patients with severe or moderate COVID-19 from different states within Brazil; a larger validation group than that used in the development to the commercially available TaqMan RT-qPCR assay which is considered the gold standard for COVID-19 testing. The sensitivity of the HRM-RTqPCR assays targeting the viral N, RdRp and E genes were 94.12, 98.04 and 92.16%, with 100% specificity to the 3 SARS-CoV-2 genome targets, and a diagnostic accuracy of 95.38, 98.46 and 93.85%, respectively. Thus, HRM-RTqPCR emerges as an attractive alternative and low-cost methodology for the molecular diagnosis of COVID-19 in restricted-budget laboratories.

A transversal study was conducted among 472 vulnerable individuals (recyclable waste pickers, immigrants and refugees, homeless individuals, as well as lesbian, gay, bisexual, and transexual individuals) in Goiânia City, the capital of the State of Goiás, Brazil, to investigate the prevalence of hepatitis E virus (HEV) infection. A total of 459 (97.2%) serum samples were tested for anti-HEV IgG and IgM antibodies using fully automated chemiluminescence immunoassays (Liaison® Murex Anti-HEV IgG and IgM assays, DiaSorin, Saluggia, Italy). Positive samples were tested for the presence of HEV RNA by a real-time polymerase chain reaction. A seroprevalence of 0.87% (95% confidence interval [CI]: 0.34–2.22) was found for anti-HEV IgG. Furthermore, anti-HEV IgM was detected in only one individual (0.22%; 95% CI: 0.04–1.22), who was also negative for HEV RNA. These findings revealed that HEV infection is infrequent in vulnerable individuals in Central Brazil, with low seroprevalence of past and recent HEV infections.