Explore the vast range of titles available.

Purpose This study aimed to comprehensively review the existing evidence concerning surgical treatment of inferior pole fractures of the patella and to report the outcomes and complications of different fixation techniques. Method This systematic review was conducted in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Searches of PubMed, Scopus, and Web of Science were conducted in March 2023. Studies were screened against predecided inclusion and exclusion criteria. The extracted data included fracture characteristics, surgical techniques, and radiographic and functional outcomes. The Methodological Index for Non-Randomized Studies (MINORS) quality assessment tool was used to assess the eligible literature. The primary outcome was postoperative range of motion of different surgical methods, and the secondary outcomes were other clinical results and complications. Results A total of 42 studies satisfied all the inclusion criteria and were deemed suitable for review. Fourteen case–control studies and 28 case series were selected, for a total of 1382 patients with a mean age of 51.0 years (range = 11–90). The follow-up period ranged from 6 to 300 months. The surgical techniques were categorized based on the device used as follows: (1) rigid fixation device; (2) tensile fixation device; (3) mixed device; and (4) extra-patella device. Conclusion Regarding the outcomes following surgical treatment of inferior pole fractures of the patella, the postoperative range of motion (ROM) of each technique ranged from 120° to 135°, with the exception of that involving the patellotibial wire which had poorer outcomes. The lowest functional score was also found in those using the patellotibial wire. Complications after surgery are rare, but approximately half of the patients required additional surgery for implant removal, particularly those whose initial surgery involved rigid fixation devices. It's worth noting that bony fragment excision is no longer recommended, and the combined use of multiple surgical devices is now more common.

Background The optimal surgical technique for the fixation of inferior pole patellar fracture remains controversial. The aims of this study were (1) to compare clinical and radiological outcomes following fixation of inferior pole patellar fracture by using tension band wire (TBW) and transosseous reattachment (TOR) without excision of the bony fragment and (2) to determine the risk factors for postoperative radiological loss of reduction. Methods For this retrospective cohort study, consecutive patients with inferior pole patellar fracture between January 2010 and December 2017 were recruited. The patients were grouped according to their fixation method (TBW or TOR), and demographic data, clinical outcomes, and postoperative Insall–Salvati (IS) ratio were analyzed. Then, the patients were grouped according to radiological loss of reduction, the possible risk factors for loss of reduction were identified, and odds ratios were calculated. Result This study included 55 patients with inferior pole patellar fracture; 30 patients were treated using TBW and 25 were treated using TOR. Clinical failure occurred in two patients in the TBW group (7%) and three in the TOR group (12%). The rate of radiological loss of reduction was significant higher in the TOR group, whereas removal of implants was significantly more common in the TBW group. Patella baja was noted immediately after surgery in the TOR group, but the IS ratios of the two groups were similar after 3 months. Fracture displacement of more than 30 mm was the only independent risk factor for postoperative radiological loss of reduction. Conclusion For treating inferior pole patellar fracture, both TWB and TOR were effective and had a low clinical failure rate. In 60% of patients undergoing TBW fixation, however, additional surgery was required to remove the implants. Patella baja occurred immediately following TOR, but the patellar height was similar to that in the TBW group after 3 months. Surgeons should be aware of the high risk of postoperative radiological loss of reduction, especially when the fracture displacement is more than 30 mm.

The relationship between wind and waves has been extensively studied over time. However, understanding the local wind and wave relationship remains crucial for advancing renewable energy development and optimizing ocean management strategies. This study used wind and wave data collected by the ten weather buoys in the waters surrounding Taiwan to analyze regional sea states. The relationship between wind speed and significant wave height (SWH) was examined using regression analysis. Additionally, machine learning techniques were employed to assess the relative importance of features contributing to SWH growth. The regression analysis revealed that SWH in the waters surrounding Taiwan was not fully developed, with notable discrepancies observed between the waters east and west of Taiwan. According to the power law formula describing the relationship between wind speed and SWH, the eastern waters exhibited a larger prefactor coupled with a smaller scaling exponent, while the western waters manifested a converse parametric configuration. Through an evaluation of four machine learning algorithms, it was determined that wind speed is the most influential factor driving these regional differences, especially in the waters west of Taiwan. Beyond wind speed, air pressure or temperature emerged as the secondary feature factor governing wind–wave interactions in the waters east of Taiwan.

Background Poor functional outcome can result from humeral greater tuberosity (GT) fracture if not treated appropriately. A two-screw construct is commonly used for the surgical treatment of such injury. However, loss of reduction is still a major concern after surgery. To improve the biomechanical strength of screw fixation in GT fractures, we made a simple modification of the two-screw construct by adding a cerclage wire to the two-screw construct. The purpose of this biomechanical study was to analyze the effect of this modification for the fixation of GT fractures. Materials and methods Sixteen fresh-frozen human cadaveric shoulders were used in this study. The fracture models were arbitrarily assigned to one of two fixation methods. Group A ( n  = 8) was fixed with two threaded cancellous screws with washers. In group B ( n  = 8), all screws were set using methods identical to group A, with the addition of a cerclage wire. Horizontal traction was applied via a stainless steel cable fixed directly to the myotendinous junction of the supraspinatus muscle. Displacement of the fracture fixation under a pulling force of 100 N/200 N and loading force to construct failure were measured. Results The mean displacements under 100 N and 200 N traction force were both significantly decreased in group B than in group A. (100 N: 1.06 ± 0.12 mm vs. 2.26 ± 0.24 mm, p  < 0.001; 200 N: 2.21 ± 0.25 mm vs. 4.94 ± 0.30 mm, p  < 0.001) Moreover, the failure load was significantly higher in group B compared with group A. (415 ± 52 N vs.335 ± 47 N, p  = 0.01), Conclusions The current biomechanical cadaveric study demonstrated that the two-screw fixation construct augmented with a cerclage wire has higher mechanical performance than the conventional two-screw configuration for the fixation of humeral GT fractures. Trial registration Retrospectively registered.

Objective Schwannomas are benign, slow-growing tumors originating from Schwann cells in peripheral nerves, commonly affecting the median and ulnar nerves in the forearm and wrist. Surgical excision is the gold standard treatment. This study presents our treatment strategies and outcomes for large-sized ulnar and median nerve schwannomas at the forearm and wrist level. Methods From 2012 to 2023, we enrolled 15 patients with schwannomas over 2 cm in size in the median or ulnar nerve at the forearm and wrist. The study included 12 patients with median nerve schwannomas (mean age: 61 years) and 3 with ulnar nerve schwannomas (mean age: 68 years), with a mean follow-up of 26.9 months. Results After surgery, all patients with median nerve schwannomas experienced mild, transient numbness affecting fewer than two digits, resolving within six months without motor deficits. Ulnar nerve schwannoma excision caused mild numbness in two patients, also resolving within six months, but all three developed ulnar claw hand deformity, which persisted but improved at the last follow-up. Despite this, patients were satisfied with the surgery due to relief from severe tingling pain. Conclusions Schwannomas of the median, ulnar, and other peripheral nerves should be removed by carefully dissecting the connecting nerve fascicles to avoid injury to healthy ones. Sensory deficits may occur but are unlikely to significantly impact quality of life. However, in motor-dominant nerves like the ulnar nerve, there is a risk of significant motor deficits that could affect hand function, though not completely. Therefore, thorough preoperative discussion and consideration of interfascicular nerve grafting are essential.

Trapezoid dislocations are extremely uncommon injuries because of the strong intercarpal and carpometacarpal ligaments that provide greater stability to the trapezoid-metacarpal joint compared with the more ulnar carpometacarpal joints. We report a case of trapezoid dislocation, emphasizing the radiographic features essential for diagnosis and the fixation strategy used for management. A 50-year-old woman sustained a sliding fall while riding a scooter, resulting in a trapezoid dislocation from the carpometacarpal joint accompanied by a fracture at the base of the right third metacarpal. The injury was managed with retrograde intramedullary K-wire transfixation of the second metacarpal-trapezoid joint combined with a spanning plate across the thrid metacarpal-capitate joint. The spanning plate maintained the length of the third metacarpal relative to the capitate, thereby indirectly restoring the anatomical alignment of the second metacarpal and stabilizing the reduced trapezoid. The retrograde intramedullary K-wire was easily positioned so that its tip did not extend beyond the trapezoid, thus preventing potential irritation of surrounding vital structures that might result from an obliquely placed K-wire. The 'missing carpal sign' serves as an important radiographic clue suggestive of trapezoid dislocation. Given the strong surrounding interosseous ligaments, it is important to recognize the possible occurrence of trapezoid dislocation in association with fractures or dislocations involving structures adjacent to the trapezoid. We present a retrograde intramedullary K-wire fixation technique for stabilizing the trapezoid-metacarpal joint, which can be easily and effectively applied after anatomical reduction of the trapezoid.

Background Concomitant injuries to the radiocarpal ligaments may occur during episodes of distal radius fractures, which may not cause acute subluxation or dislocation but can lead to radiocarpal instability and progress over time. This study aimed to analyze the occurrence of ulnar carpal translation (UCT) after open reduction and internal fixation of distal radius fractures and evaluate the associated factors of UCT. Methods The retrospective study has been done now and includes patients treated between 2010 and 2020 who had undergone reduction and locking plate fixation of distal radius fractures. We assessed radiographs taken immediately after the operation and at 3 months post-operation, enrolling patients with UCT for evaluation. In addition to demographic data, we evaluated radiographic parameters, including fracture pattern, fragment involvement, and ulnar variance. We also assessed the palmar tilt-lunate (PTL) angle to determine associated rotatory palmar subluxation of the lunate (RPSL). Results Among the 1,086 wrists, 53 (4.9%) had UCT within 3 months post-operation. The majority of wrists with UCT exhibited normal to minus ulnar variance (49 wrists; mean: −1.1 mm), and 24 patients (45.3%) had concomitant RPSL. Fracture classification was as follows: 19 type A3 (35.8%), 5 type C1 (9.4%), 11 type C2 (20.8%), and 18 type C3 (34.0%). Radial styloid was involved in 20 wrists (37.7%), palmar rim in 18 wrists (34.0%), dorsal rim in 25 wrists (47.2%), and die-punch fractures in 3 wrists (5.7%). Concomitant ulnar styloid fractures were present in 29 wrists (54.7%). Conclusion This study highlights the potential for UCT to occur following reduction and fixation of distal radius fractures, particularly in cases with a more severe fracture pattern and combined with ulnar minus variance. The high incidence of concomitant RPSL provides further evidence for the possibility of associated radiocarpal ligament insufficiency after distal radius fracture.

Purpose To compare the anterior translation and internal rotation of tibia on magnetic resonance imaging (MRI) between adult and adolescent patients with anterior cruciate ligament (ACL) tears. Methods Patients who underwent isolated ACL reconstruction from January 2013 to May 2021 were retrospectively reviewed. The exclusion criteria included incomplete data, poor image quality, a prior ACL surgery, and concomitant fractures or other ligament injuries. The enrolled patients were divided into two groups based on their ages: an adult group (age > 19 years) and an adolescent group (15 to 19 years of age). Anterior tibial translation and femorotibial rotation were measured on MRI. A Student’s t-test was used for the statistical analysis comparing the adult and adolescent groups. Results A total of 365 patients (279 adults and 86 adolescents) were enrolled in the present study. The anterior tibial translation in the adult group (4.8 ± 4.4 mm) and the adolescent group (5.0 ± 4.2 mm) was not significantly different ( p  = 0.740). On the other hand, the tibial internal rotation in the adult group (5.6 ± 5.0 degree) was significantly greater compared to the adolescent group (4.2 ± 5.6 degree) ( p  = 0.030). The intraclass correlation coefficients (ICC) of the measured data from two independent observers showed excellent reliability (0.964 and 0.961 for anterior tibial translation and tibial internal rotation, respectively). Conclusion The adult patients with ACL tears exhibited significant greater tibial internal rotation compared to the adolescent patients, whereas the magnitude of the anterior tibial translation was similar in both groups. Care should be taken if clinicians plan to establish the cutoff point values for diagnosis of ACL tears using the femorotibial internal rotation angle.

All-vanadium redox flow batteries (VRBs) are potential energy storage systems for renewable power sources because of their flexible design, deep discharge capacity, quick response time, and long cycle life. To minimize the energy loss due to the shunt current, in a traditional design, a flow field is machined on two electrically insulated frames with a graphite plate in between. A traditional bipolar plate (BP) of a VRB consists of many components, and thus, the assembly process is time consuming. In this study, an integrally molded BP is designed and fabricated to minimize the manufacturing cost. First, the effects of the mold design and injection parameters on frame formability were analyzed by simulation. Second, a new graphite plate design for integral molding was proposed, and finally, two integrally molded BPs were fabricated and compared. Results show that gate position significantly affects air traps and the maximum volume shrinkage occurs at the corners of a BP. The volume shrinkage can be reduced using a large graphite plate embedded within the frame.

There are several options for LHB tenodesis; yet, there is no standard of care. This technical note describes an extramedullary all-suture anchor technique for LHB tenodesis that is similar to the extramedullary cortical button technique. The LHB tenodesis is performed by using the Y-Knot (1.3-mm; ConMed Linvatec, Largo, FL).The biceps tenotomy is completed arthroscopically, and a standard subpectoral approach is used for the tenodesis. A reamer is first used to drill through the anterior cortex of the humerus; subsequently, a 1.3-mm drill bit is used to drill through the posterior cortex. The Y-Knot anchor is passed through the bone tunnel and secured on the posterior cortical bone. A modified rolling hitch suture is placed 10 mm distal to the end of the LHB tendon by using one suture limb of the Y-Knot anchor. The other suture limb is pulled to shuttle the LHB tendon into the humerus, and the construct is fixed by tying down one limb to the other. This technical note describes an alternative method for subpectoral biceps tenodesis and uses a small drill hole, conserves bone, and minimizes trauma to the tendon. Level of evidence V.