Explore the vast range of titles available.

Measuring atomic-resolution images of materials with x-ray photons during chemical reactions or physical transformations resides at the technological forefront of x-ray science. New x-ray-based experimental capabilities have been closely linked with advances in x-ray sources, a trend that will continue with the impending arrival of x-ray-free electron lasers driven by electron accelerators. We discuss recent advances in ultrafast x-ray science and coherent imaging made possible by linear-accelerator-based light sources. These studies highlight the promise of ultrafast x-ray lasers, as well as the technical challenges and potential range of applications that will accompany these transformative x-ray light sources.

Serial X-ray crystallography allows macromolecular structure determination at both X-ray free electron lasers (XFELs) and, more recently, synchrotron sources. The time resolution for serial synchrotron crystallography experiments has been limited to millisecond timescales with monochromatic beams. The polychromatic, “pink”, beam provides a more than two orders of magnitude increased photon flux and hence allows accessing much shorter timescales in diffraction experiments at synchrotron sources. Here we report the structure determination of two different protein samples by merging pink-beam diffraction patterns from many crystals, each collected with a single 100 ps X-ray pulse exposure per crystal using a setup optimized for very low scattering background. In contrast to experiments with monochromatic radiation, data from only 50 crystals were required to obtain complete datasets. The high quality of the diffraction data highlights the potential of this method for studying irreversible reactions at sub-microsecond timescales using high-brightness X-ray facilities. Serial X-ray crystallography (SX) is used for data collection at X-ray Free Electron Lasers. Here the authors show that a polychromatic “pink” synchrotron X-ray beam can be used for SX, which is useful when crystal supply is limited and will allow time-resolved measurements at synchrotron sources in the future.

Intense, coherent X-ray pulses from a free-electron laser can be used to obtain high-resolution morphology of individual sub-micrometre particles in their native state, while at the same time their composition is analysed by mass spectrometry. Free-electron laser imaging of aerosols Aerosol particles are of importance in fields as diverse as materials engineering, toxicology and climate change, yet it is difficult to analyse the structure and properties of these materials in their native environment. This paper reports an in situ method for imaging individual sub-micrometre-sized particles to nanometre resolution in flight using intense X-ray pulses from the Linac Coherent Light Source free-electron laser. The technique can also simultaneously carry out compositional analysis using time-of-flight mass spectrometry. The morphology of micrometre-size particulate matter is of critical importance in fields ranging from toxicology 1 to climate science 2 , yet these properties are surprisingly difficult to measure in the particles’ native environment. Electron microscopy requires collection of particles on a substrate 3 ; visible light scattering provides insufficient resolution 4 ; and X-ray synchrotron studies have been limited to ensembles of particles 5 . Here we demonstrate an in situ method for imaging individual sub-micrometre particles to nanometre resolution in their native environment, using intense, coherent X-ray pulses from the Linac Coherent Light Source 6 free-electron laser. We introduced individual aerosol particles into the pulsed X-ray beam, which is sufficiently intense that diffraction from individual particles can be measured for morphological analysis. At the same time, ion fragments ejected from the beam were analysed using mass spectrometry, to determine the composition of single aerosol particles. Our results show the extent of internal dilation symmetry of individual soot particles subject to non-equilibrium aggregation, and the surprisingly large variability in their fractal dimensions. More broadly, our methods can be extended to resolve both static and dynamic morphology of general ensembles of disordered particles. Such general morphology has implications in topics such as solvent accessibilities in proteins 7 , vibrational energy transfer by the hydrodynamic interaction of amino acids 8 , and large-scale production of nanoscale structures by flame synthesis 9 .

The entatic state denotes a distorted coordination geometry of a complex from its typical arrangement that generates an improvement to its function. The entatic-state principle has been observed to apply to copper electron-transfer proteins and it results in a lowering of the reorganization energy of the electron-transfer process. It is thus crucial for a multitude of biochemical processes, but its importance to photoactive complexes is unexplored. Here we study a copper complex--with a specifically designed constraining ligand geometry--that exhibits metal-to-ligand charge-transfer state lifetimes that are very short. The guanidine-quinoline ligand used here acts on the bis(chelated) copper(I) centre, allowing only small structural changes after photoexcitation that result in very fast structural dynamics. The data were collected using a multimethod approach that featured time-resolved ultraviolet-visible, infrared and X-ray absorption and optical emission spectroscopy. Through supporting density functional calculations, we deliver a detailed picture of the structural dynamics in the picosecond-to-nanosecond time range.

Reliable sample delivery and efficient use of limited beam time have remained bottlenecks for serial crystallography (SX). Using a high-intensity polychromatic X-ray beam in combination with a newly developed charge-integrating JUNGFRAU detector, we have applied the method of fixed-target SX to collect data at a rate of 1 kHz at a synchrotron-radiation facility. According to our data analysis for the given experimental conditions, only about 3 000 diffraction patterns are required for a high-quality diffraction dataset. With indexing rates of up to 25%, recording of such a dataset takes less than 30 s.

Hundreds of genes have been implicated in autism spectrum disorders (ASDs). In genetically heterogeneous conditions, large families with multiple affected individuals provide strong evidence implicating a rare variant, and replication of the same variant in multiple families is unusual. We previously published linkage analyses and follow-up exome sequencing in seven large families with ASDs, implicating 14 rare exome variants. These included rs200195897, which was transmitted to four affected individuals in one family. We attempted replication of those variants in the MSSNG database. MSSNG is a unique resource for replication of ASD risk loci, containing whole genome sequence (WGS) on thousands of individuals diagnosed with ASDs and family members. For each exome variant, we obtained all carriers and their relatives in MSSNG, using a TDT test to quantify evidence for transmission and association. We replicated the transmission of rs200195897 to four affected individuals in three additional families. rs200195897 was also present in three singleton affected individuals, and no unaffected individuals other than transmitting parents. We identified two additional rare variants (rs566472488 and rs185038034) transmitted with rs200195897 on 1p36.33. Sanger sequencing confirmed the presence of these variants in the original family segregating rs200195897. To our knowledge, this is the first example of a rare haplotype being transmitted with ASD in multiple families. The candidate risk variants include a missense mutation in SAMD11, an intronic variant in NOC2L, and a regulatory region variant close to both genes. NOC2L is a transcription repressor, and several genes involved in transcription regulation have been previously associated with ASDs.

Achromatic focusing systems for hard X-rays are examined which consist of a refractive lens paired with a diffractive lens. Compared with previous analyses, we take into account the behaviour of thick refractive lenses, such as compound refractive lenses and waveguide gradient index refractive lenses, in which both the focal length and the position of the principal planes vary with wavelength. Achromatic systems formed by the combination of such a thick refractive lens with a multilayer Laue lens are found that can operate at a focusing resolution of about 3 nm, over a relative bandwidth of about 1%. With the appropriate distance between the refractive and diffractive lenses, apochromatic systems can also be found, which operate over relative bandwidth greater than 10%. These systems can be used to focus short pulses without distorting them in time by more than several attoseconds. Such systems are suitable for high-flux scanning microscopy and for creating high intensities from attosecond X-ray pulses.

During the past few years, serial crystallography methods have undergone continuous development and serial data collection has become well established at high-intensity synchrotron-radiation beamlines and XFEL radiation sources. However, the application of experimental phasing to serial crystallography data has remained a challenging task owing to the inherent inaccuracy of the diffraction data. Here, a particularly gentle method for incorporating heavy atoms into micrometre-sized crystals utilizing lipidic cubic phase (LCP) as a carrier medium is reported. Soaking in LCP prior to data collection offers a new, efficient and gentle approach for preparing heavy-atom-derivative crystals directly before diffraction data collection using serial crystallography methods. This approach supports effective phasing by utilizing a reasonably low number of diffraction patterns. Using synchrotron radiation and exploiting the anomalous scattering signal of mercury for single isomorphous replacement with anomalous scattering (SIRAS) phasing resulted in high-quality electron-density maps that were sufficient for building a complete structural model of proteinase K at 1.9 Å resolution using automatic model-building tools.

Femtosecond XFEL crystallography is used to identify dynamic changes in the adenine riboswitch aptamer domain, with at least four states identified in real time, two in the apo form before binding and two with the ligand bound. Riboswitch RNA reaction-state structures The potential of nanocrystallography to offer insights into dynamics is now beginning to be realized. Yun-Xing Wang and colleagues have used femtosecond X-ray free-electron laser (XFEL) crystallography to study dynamic changes in the ligand-binding, or aptamer, domain of the Vibrio vulnificus adenine riboswitch. They identify at least four states, two in the apo form before binding and two with ligand bound, in real time. These results allow the modelling of a kinetic scheme that describes how ligand binding transmits a signal through the P1 helix. The large-scale conformational changes captured within the crystal are enabled by the time-resolved serial crystallography. Riboswitches are structural RNA elements that are generally located in the 5′ untranslated region of messenger RNA. During regulation of gene expression, ligand binding to the aptamer domain of a riboswitch triggers a signal to the downstream expression platform 1 , 2 , 3 . A complete understanding of the structural basis of this mechanism requires the ability to study structural changes over time 4 . Here we use femtosecond X-ray free electron laser (XFEL) pulses 5 , 6 to obtain structural measurements from crystals so small that diffusion of a ligand can be timed to initiate a reaction before diffraction. We demonstrate this approach by determining four structures of the adenine riboswitch aptamer domain during the course of a reaction, involving two unbound apo structures, one ligand-bound intermediate, and the final ligand-bound conformation. These structures support a reaction mechanism model with at least four states and illustrate the structural basis of signal transmission. The three-way junction and the P1 switch helix of the two apo conformers are notably different from those in the ligand-bound conformation. Our time-resolved crystallographic measurements with a 10-second delay captured the structure of an intermediate with changes in the binding pocket that accommodate the ligand. With at least a 10-minute delay, the RNA molecules were fully converted to the ligand-bound state, in which the substantial conformational changes resulted in conversion of the space group. Such notable changes in crystallo highlight the important opportunities that micro- and nanocrystals may offer in these and similar time-resolved diffraction studies. Together, these results demonstrate the potential of ‘mix-and-inject’ time-resolved serial crystallography to study biochemically important interactions between biomacromolecules and ligands, including those that involve large conformational changes.

Serial femtosecond crystallography (SFX) uses X-ray pulses from free-electron laser (FEL) sources that can outrun radiation damage and thereby overcome long-standing limits in the structure determination of macromolecular crystals. Intense X-ray FEL pulses of sufficiently short duration allow the collection of damage-free data at room temperature and give the opportunity to study irreversible time-resolved events. SFX may open the way to determine the structure of biological molecules that fail to crystallize readily into large well-diffracting crystals. Taking advantage of FELs with high pulse repetition rates could lead to short measurement times of just minutes. Automated delivery of sample suspensions for SFX experiments could potentially give rise to a much higher rate of obtaining complete measurements than at today's third generation synchrotron radiation facilities, as no crystal alignment or complex robotic motions are required. This capability will also open up extensive time-resolved structural studies. New challenges arise from the resulting high rate of data collection, and in providing reliable sample delivery. Various developments for fully automated high-throughput SFX experiments are being considered for evaluation, including new implementations for a reliable yet flexible sample environment setup. Here, we review the different methods developed so far that best achieve sample delivery for X-ray FEL experiments and present some considerations towards the goal of high-throughput structure determination with X-ray FELs.