Explore the vast range of titles available.

An important application of silver nanoparticles (Ag NPs) is their use as an antimicrobial and wound dressing material. The aim of this study is to investigate the morphological dependence on the antimicrobial activity and cellular response of Ag NPs. Ag NPs of various shapes were synthesized in an aqueous solution using a simple method. The morphology of the synthesized Ag NPs was observed via TEM imaging. The antimicrobial activity of the Ag NPs with different morphologies was evaluated against various microorganisms ( [ ] [ ] [ ]). The antimicrobial activity of the Ag NPs was also examined according to the concentration in terms of the growth rate of . The TEM images indicated that the Ag NPs with different morphologies (sphere, disk and triangular plate) had been successfully synthesized. The antimicrobial activity obtained from the inhibition zone was in the order of spherical Ag NPs > disk Ag NPs > triangular plate Ag NPs. In contrast, fibroblast cells grew well in all types of Ag NPs when the cell viability was evaluated via an MTT assay. An inductively coupled plasma mass assay showed that the difference in the antimicrobial activities of the Ag NPs was closely associated with the difference in the release rate of the Ag ions due to the difference in the surface area of the Ag NPs. The morphological dependence of the antimicrobial activity of the Ag NPs can be explained by the difference in the Ag ion release depending on the shape. Therefore, it will be possible to control the antimicrobial activity by controlling the shape and size of the Ag NPs.

In this study, various shapes of silver nanoparticles (Ag NPs) were synthesized via simple methods in aqueous solution. The size and shape of Ag NPs were measured by TEM image and DLS, and the crystalline form of Ag NPs was confirmed by XRD. From ATR-IR and zeta potential, the Ag NPs were found to be well surrounded by PVP. In addition, the catalytic activity of Ag NPs was evaluated using model dyes. Unlike the conventional catalysts, the model dyes with absorption peaks that did not overlap with the SPR peaks of the Ag NPs were selected to evaluate the catalytic activity without removal of the Ag NPs from the dye solution.

Nanofibers composed of cellulose acetate (CA) and montmorillonite (MMT) were prepared by electrospinning method. MMT was first dispersed in water and mixed with an acetic acid solution of CA. The viscosity and conductivity of the CA/MMT solutions with different MMT contents were measured to compare with those of the CA solution. The CA/MMT solutions were electrospun to fabricate the CA/MMT composite nanofibers. The morphology, thermal stability, and crystalline and mechanical properties of the composite nanofibers were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and tensile test. The average diameters of the CA/MMT composite nanofibers obtained by electrospinning 18 wt% CA/MMT solutions in a mixed acetic acid/water (75/25, w/w) solvent ranged from 150~350 nm. The nanofiber diameter decreased with increasing MMT content. TEM indicated the coexistence of CA nanofibers. The CA/MMT composite nanofibers showed improved tensile strength compared to the CA nanofiber due to the physical protective barriers of the silicate clay layers. MMT could be incorporated into the CA nanofibers resulting in about 400% improvement in tensile strength for the CA sample containing 5 wt% MMT.

In this study, silver chloride nanoparticles (AgCl NPs) were prepared using chitosan oligomer (CHI) and chitosan oligomer derivatives (CHI-FITC). The CHI and CHI-FITC were used as markers to confirm the formation of AgCl NPs using their fluorescence properties as well as stabilizers. The fluorescence properties of CHI and CHI-FITC were monitored by a luminescence spectrophotometer, and the morphology of the AgCl NPs was further confirmed by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The fluorescence of CHI and CHI-FITC was quenched by the formation of AgCl NPs, and the Stern–Volmer equation was used to compare the two types of stabilizer. The CHI and CHI-FITC stabilizer were linear and nonlinear, respectively, with respect to the Stern–Volmer equation, and considered to be usable as fluorescence indicators to confirm the formation behavior of AgCl NPs through fluorescence quenching.

Ag nanoparticles (NPs) were prepared by chemical reduction based on green synthesis in an aqueous poly(vinyl alcohol) (PVA) solution with different temperatures and pHs. The PVA and maltose were used as stabilizing and reducing agents, respectively. Silver nitrate (AgNO 3 ) precursor for Ag NPs was also used by 1 wt% on the base of the weight of PVA. The formation of Ag NPs was examined by UV-Vis spectrophotometer, and their size was measured by transmission electron microscopy (TEM), and nanoparticle size analyzer (NPSA). The formation rate of Ag NPs in the PVA solution increased with increasing temperature and pH, whereas the size of Ag NPs stabilized with PVA increased with increasing temperature, or with decreasing pH. Subsequently, the PVA nanofibrous matrix containing Ag NPs was prepared, by electrospinning PVA solution with Ag NPs, and followed by heat treatment. The morphology and crystalline structure of PVA nanofibers with Ag NPs was observed with field emission scanning electron microscopy (FE-SEM), and X-ray diffractometer (XRD), respectively. From the degradation reaction of methylene blue (MB) using PVA nanofibers web and film, it was found that the catalytic activity of PVA matrices with Ag NPs was strongly dependent on the surface area of the PVA matrices.

This articles reports a simple and green method for preparing uniform silver nanoparticles (AgNPs), for which self-polymerized 3,4-dihydroxy-l-phenylalanine (polyDOPA) is used as the reducing and stabilizing agent in aqueous media. The AgNPs functionalized by polyDOPA were analyzed by UV–Vis spectroscopy, high-resolution transmission electron microscopy (HR-TEM), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), Raman spectrophotometry, and X-ray diffraction (XRD) techniques. The results revealed that the polyDOPA-AgNPs with diameters of 25 nm were well dispersed due to the polyDOPA. It was noted that the polyDOPA-AgNPs showed selectivity for Pb2+ and Cu2+ detection with the detection limits for the two ions as low as 9.4 × 10−5 and 8.1 × 10−5 μM, respectively. Therefore, the polyDOPA-AgNPs can be applied to both Pb2+ and Cu2+ detection in real water samples. The proposed method will be useful for colorimetric detection of heavy metal ions in aqueous media.

Recently, numerous compounds have been studied in order to develop antibacterial agents, which can prevent colonized wounds from infection, and assist the wound healing. For this purpose, novel silver chloride nanoparticles stabilized with chitosan oligomer (CHI-AgCl NPs) were synthesized to investigate the influence of antibacterial chitosan oligomer (CHI) exerted by the silver chloride nanoparticles (AgCl NPs) on burn wound healing in a rat model. The CHI-AgCl NPs had a spherical morphology with a mean diameter of 42 ± 15 nm. The burn wound healing of CHI-AgCl NPs ointment was compared with untreated group, Vaseline ointment, and chitosan ointment group. The burn wound treated with CHI-AgCl NPs ointment was completely healed by 14 treatment days, and was similar to normal skin. Particularly, the regenerated collagen density became the highest in the CHI-AgCl NPs ointment group. The CHI-AgCl NPs ointment is considered a suitable healing agent for burn wounds, due to dual antibacterial activity of the AgCl NPs and CHI.

In order to understand the evolution of the orchid plastome, we annotated and compared 124 complete plastomes of Orchidaceae representing all the major lineages in their structures, gene contents, gene rearrangements, and IR contractions/expansions. Forty-two of these plastomes were generated from the corresponding author's laboratory, and 24 plastomes-including nine genera ( , , , , , , , and )-are new in this study. All orchid plastomes, except and have a quadripartite structure consisting of a large single copy (LSC), two inverted repeats (IRs), and a small single copy (SSC) region. The IR region was completely lost in the plastomes. The SSC is lost in the plastome. The smallest plastome size was 19,047 bp, in and the largest plastome size was 178,131 bp, in . The small plastome sizes are primarily the result of gene losses associated with mycoheterotrophic habitats, while the large plastome sizes are due to the expansion of noncoding regions. The minimal number of common genes among orchid plastomes to maintain minimal plastome activity was 15, including the three subunits of (14, 16, and 36), seven subunits of (2, 3, 4, 7, 8, 11, and 14), three subunits of (5, 16, and 23), C-GCA, and P genes. Three stages of gene loss were observed among the orchid plastomes. The first was gene loss, which is widespread in Apostasioideae, Vanilloideae, Cypripedioideae, and Epidendroideae, but rare in the Orchidoideae. The second stage was the loss of photosynthetic genes ( , and ) and gene subunits, which are restricted to and some species of and . The third stage was gene loss related to prokaryotic gene expression ( , , and others), which was observed in , , and In addition, an intermediate stage between the second and third stage was observed in (Vanilloideae). The majority of intron losses are associated with the loss of their corresponding genes. In some orchid taxa, however, introns have been lost in 16 16, and P(2) without their corresponding gene being lost. A total of 104 gene rearrangements were counted when comparing 116 orchid plastomes. Among them, many were concentrated near the IRa/b-SSC junction area. The plastome phylogeny of 124 orchid species confirmed the relationship of {Apostasioideae [Vanilloideae (Cypripedioideae (Orchidoideae, Epidendroideae))]} at the subfamily level and the phylogenetic relationships of 17 tribes were also established. Molecular clock analysis based on the whole plastome sequences suggested that Orchidaceae diverged from its sister family 99.2 mya, and the estimated divergence times of five subfamilies are as follows: Apostasioideae (79.91 mya), Vanilloideae (69.84 mya), Cypripedioideae (64.97 mya), Orchidoideae (59.16 mya), and Epidendroideae (59.16 mya). We also released the first nuclear ribosomal (nr) DNA unit (18S-ITS1-5.8S-ITS2-28S-NTS-ETS) sequences for the 42 species of Orchidaceae. Finally, the phylogenetic tree based on the nrDNA unit sequences is compared to the tree based on the 42 identical plastome sequences, and the differences between the two datasets are discussed in this paper.

Gastrodia pubilabiata is a nonphotosynthetic and mycoheterotrophic orchid belonging to subfamily Epidendroideae. Compared to other typical angiosperm species, the plastome of G. pubilabiata is dramatically reduced in size to only 30,698 base pairs (bp). This reduction has led to the loss of most photosynthesis-related genes and some housekeeping genes in the plastome, which now only contains 19 protein coding genes, three tRNAs, and three rRNAs. In contrast, the typical orchid species contains 79 protein coding genes, 30 tRNAs, and four rRNAs. This study decoded the entire mitogenome of G. pubilabiata, which consisted of 44 contigs with a total length of 867,349 bp. Its mitogenome contained 38 protein coding genes, nine tRNAs, and three rRNAs. The gene content of G. pubilabiata mitogenome is similar to the typical plant mitogenomes even though the mitogenome size is twice as large as the typical ones. To determine possible gene transfer events between the plastome and the mitogenome individual BLASTN searches were conducted, using all available orchid plastome sequences and flowering plant mitogenome sequences. Plastid rRNA fragments were found at a high frequency in the mitogenome. Seven plastid protein coding gene fragments (ndhC, ndhJ, ndhK, psaA, psbF, rpoB, and rps4) were also identified in the mitogenome of G. pubilabiata. Phylogenetic trees using these seven plastid protein coding gene fragments suggested that horizontal gene transfer (HGT) from plastome to mitogenome occurred before losses of photosynthesis related genes, leading to the lineage of G. pubilabiata. Compared to species phylogeny of the lineage of orchid, it was estimated that HGT might have occurred approximately 30 million years ago.

The Vanilloideae (vanilloids) is one of five subfamilies of Orchidaceae and is composed of fourteen genera and approximately 245 species. In this study, the six new chloroplast genomes (plastomes) of vanilloids (two Lecanorchis, two Pogonia, and two Vanilla species) were decoded, and then the evolutionary patterns of plastomes were compared to all available vanilloid plastomes. Pogonia japonica has the longest plastome, with 158,200 bp in genome size. In contrast, Lecanorchis japonica has the shortest plastome with 70,498 bp in genome size. The vanilloid plastomes have regular quadripartite structures, but the small single copy (SSC) region was drastically reduced. Two different tribes of Vanilloideae (Pogonieae and Vanilleae) showed different levels of SSC reductions. In addition, various gene losses were observed among the vanilloid plastomes. The photosynthetic vanilloids (Pogonia and Vanilla) showed signs of stage 1 degradation and had lost most of their ndh genes. The other three species (one Cyrotsia and two Lecanorchis), however, had stage 3 or stage 4 degradation and had lost almost all the genes in their plastomes, except for some housekeeping genes. The Vanilloideae were located between the Apostasioideae and Cypripedioideae in the maximum likelihood tree. A total of ten rearrangements were found among ten Vanilloideae plastomes when compared to the basal Apostasioideae plastomes. The four sub-regions of the single copy (SC) region shifted into an inverted repeat (IR) region, and the other four sub-regions of the IR region shifted into the SC regions. Both the synonymous (dS) and nonsynonymous (dN) substitution rates of IR in-cooperated SC sub-regions were decelerated, while the substitution rates of SC in-cooperated IR sub-regions were accelerated. A total of 20 protein-coding genes remained in mycoheterotrophic vanilloids. Almost all these protein genes show accelerated base substitution rates compared to the photosynthetic vanilloids. Two of the twenty genes in the mycoheterotrophic species faced strong “relaxed selection” pressure (p-value < 0.05).