Explore the vast range of titles available.

CAD/CAM (computer-aided design/computer-aided manufacturing) for indirect restorative materials has been recently introduced in dentistry. The purpose of this study was to evaluate the change of the surface micro-hardness of different restorative CAD/CAM materials after exposure to a carbonated acidic drink (Coca-Cola, Coca-Cola Company, Milan, Italy). One hundred and eighty specimens of identical size (2 mm thickness) were obtained by sectioning each tested CAD/CAM block of four materials: a hybrid ceramic (CERASMART™, GC Corporation, Tokyo, Japan), a resin nano ceramic (Lava™ Ultimate, 3M, Monrovia, CA, USA), a nanohybrid composite (Grandio blocs, VOCO GmbH, Cuxhaven, Germany), and a zirconia-reinforced lithium silicate glass ceramic (VITA SUPRINITY® PC; VITA Zahnfabrik, Bad Sackingen, Germany). Forty-five specimens of each material were tested. Micro-hardness was measured at baseline, after 7 days and after 28 days. The data were analyzed. The micro-hardness of each material varied significantly after immersion in Coca-Cola. The nanohybrid composite had a high initial micro-hardness and the greatest percentage loss after acid exposure. The hybrid ceramic and the resin nano ceramic had similar percentage losses of micro-hardness values even if the second material had higher initial values. The zirconia-reinforced lithium silicate glass ceramic had the highest baseline values and the lowest percentage loss of micro-hardness. The different CAD/CAM materials presented different micro-hardness values before and after acid exposure.

Background. Acidic beverages, such as soft drinks, can produce erosion of resin composites. The purpose of the present study was to investigate mechanical properties of different esthetic restorative materials after exposure to acidic drink. Methods. Nine different composites were tested: nanofilled (Filtek Supreme XTE, 3M ESPE), microfilled hybrid (G-ænial, GC Corporation), nanohybrid Ormocer (Admira Fusion, Voco), microfilled (Gradia Direct, GC Corporation), microfilled hybrid (Essentia, GC Corporation), nanoceramic (Ceram.X Universal, Dentsply De Trey), supranano spherical hybrid (Estelite Asteria, Tokuyama Dental Corporation), flowable microfilled hybrid (Gradia Direct Flo, GC Corporation), and bulk fill flowable (SureFil SDR flow, Dentsply De Trey). Thirty specimens of each esthetic restorative material were divided into 3 subgroups (n=10): specimens of subgroup 1 were used as control, specimens of subgroup 2 were immersed in 50 ml of Coca Cola for 1 week, and specimens of subgroup 3 were immersed in 50 ml of Coca Cola for 1 month. Flexural strength and elastic modulus were measured for each material with an Instron Universal Testing Machine. Data were submitted to statistical analysis. Results. After distilled water immersion, nanofilled composite showed the highest value of both flexural strength and elastic modulus, but its flexural values decreased after acidic drink immersion. No significant differences were reported between distilled water and acidic drink immersion for all other materials tested both for flexural and for elastic modulus values. Conclusions. Even if nanofilled composite showed highest results, acidic drink immersion significantly reduced flexural values.

Background: Dental radiographs are essential for diagnosis and treatment planning in modern dentistry. However, their manual interpretation is time-consuming and subject to variability, highlighting the need for automated tools to improve efficiency and consistency. This study aims to validate ORTHOSEG, a deep learning-based system designed to automate the segmentation of anatomical, pathological, and non-pathological elements in radiographs, including orthopantomograms, bitewings, and periapical images. Methods: ORTHOSEG’s performance was evaluated using a rigorously curated dataset of 150 dental radiographs, including 50 orthopantomograms, 50 bitewings, and 50 periapical images, with manual annotations by expert clinicians serving as the ground truth. The system’s segmentation performance was assessed using standard evaluation metrics, including mean Dice Similarity Coefficient (mDSC) and mean Intersection over Union (mIoU), and inference time was also recorded. Results: The system achieved high accuracy, with mDSC and mIoU values of 0.635 ± 0.233 and 0.576 ± 0.214, respectively. In particular for orthopantomograms, it achieved an mDSC of 0.756 ± 0.174 and an mIoU of 0.684 ± 0.172, surpassing existing benchmarks. Its segmentation capabilities extend to approximately 70 distinct elements, underscoring its comprehensive utility. The system demonstrated efficient computational performance, with processing times of 19.745 ± 3.625 s for orthopantomograms, 8.467 ± 0.903 s for bitewings, and 5.653 ± 0.897 s for periapical radiographs on standard clinical hardware. Conclusions: ORTHOSEG demonstrates efficiency suitable for integration into routine workflows. This study confirms ORTHOSEG’s reliability and potential to improve diagnostic workflows, offering clinicians a valuable tool for faster and more detailed radiograph analysis. Future research will focus on extending validation across diverse clinical scenarios to ensure broader applicability. However, this study has limitations, including the use of a dataset derived from a European population and the absence of usability and clinical workflow evaluation, which should be addressed in future studies.

Introduction Current research points to the importance personality pathology and Major Depression e as relevant psycopathological risk factors for understanding suicidal risk in adolescence. Literature has mainly focused on the role of BPD, however current orientations in personality pathological functioning suggest that BPD may be the representative of a general personality disturbance, a factor of vulnerability underlying diverse psychopathological variants and aspects of maladaptive functioning. However, recent studies seem to have neglected the contributions that other specific personality disorders and personality pathology as a general factor of vulnerability for suicidality; and only marginally investigated the interaction of personality disorder (PD) as an overall diagnosis and individual PDs and major depression (MDD). In this paper, the independent and cumulative effects of MDD and DSM-IV PDs on suicidal risk are investigated in a sample of adolescents observed in a longitudinal window of observation ranging from three months preceding the assessment to a six-month follow up period of clinical monitoring. Methods A sample of 118 adolescents (mean age = 15.48 ± 1.14) referred for assessment and treatment on account of suicidal ideation or behavior were administered the CSSRS, SCID II, Kiddie-SADS at admission at inpatient and outpatient Units. All subjects included in the study had reported suicidal ideation or suicide attempts at the C-SSRS; The CSSRS was applied again to all patients who reported further suicidal episodes during the six-months follow-up period of clinical monitoring. Dimensional diagnoses of PDs was obtained by summing the number of criteria met by each subject at SCID-%-PD 5, In order, to test the significance of the associations between the variables chosen as predictors (categorical and dimensional PDs and MD diagnosis), and the suicidal outcomes variables suicide attempts, number of suicide attempts and potential lethality of suicide attempt, non-parametric bivariate correlations, logistic regression models and mixed-effects Poisson regression were performed PD. Results The categorical and dimensional diagnosis of PD showed to be a significant risk factors for suicide attempt and their recurrence, independently of BPD, that anyway was confirmed to be a specific significant risk factor for suicidal behaviors. Furthermore, PD assessed at a categorical and dimensional level and Major Depression exert an influence on suicidal behaviors and their lethality both as independent and cumulative risk factors. Limitations Besides incorporating dimensional thinking into our approach to assessing psychopathology, our study still relied on traditionally defined assessment of PD. Future studies should include AMPD-defined personality pathology in adolescence to truly represent dimensional thinking. Conclusion These results point to the importance of early identification of the level of severity of personality pathology at large and its co-occurrence with Major Depression for the management of suicidal risk in adolescence.

Direct pulp capping covers the exposed surface of the pulp to maintain its vitality and preserve its functional and biologic activity. The aim of the present study was to compare the biocompatibility effects of seven different pulp-capping materials in vitro: Dycal , Calcicur , Calcimol LC , TheraCal LC , ProRoot MTA , MTA-Angelus , and Biodentine . Using the Transwell insert methodology by Alamar blue test, we evaluated the cytocompatibility of the above mentioned materials towards murine odontoblasts cells (MDPC-23) at three different times (24, 48, and 72 h). For additional control, the cell viability at 72 hours was also assessed by MTT assay. Morphological analysis of murine odontoblasts was assessed by Confocal Laser Scanning Microscope. The results indicate significantly different biocompatibility among materials with different composition. Biodentine and mineral trioxide aggregate (MTA)-based products showed lower cytotoxicity, varying from calcium hydroxide-based materials, which exhibited higher cytotoxicity. Although our findings are limited to in vitro conditions, the observation that Biodentine caused a cytotoxic effect similar to MTA suggests that it may be considered an alternative in pulp-capping treatment, as calcium hydroxide-based materials present higher cytotoxic effects.

[...]patients had two scans before ECT and the authors present the average of the two scans as baseline measures. [...]the authors attribute the increase in volume to a process of neurogenesis, which they consider a positive outcome. [...]the authors bemoan the difficulty with recruiting ‘suitable patients’ and ended up with a very small sample.

Background: Acidic beverages, such as soft drinks (orange juice and cola), can produce erosion of resin composites. The aim of this in vitro study was to evaluate the effect of immersion in acidic drink on the Vickers microhardness (VK) of different esthetic restorative materials (one nanohybrid Ormocer-based composite, one nanoceramic composite, one nanofilled composite, and one microfilled hybrid composite). Materials and Methods: In this in vitro study, thirty specimens of each esthetic restorative material were divided into three subgroups (n = 10): specimens of group 1 were used as control, specimens of group 2 were immersed in 50 ml of acidic drink for 1 day, specimens of group 3 were immersed in 50 ml of acidic drink for 7 days. Data were analyzed by Shapiro-Wilk test to assess the normality of the distributions followed by nonparametric Kruskal-Wallis analysis of variance and Mann-Whitney U-test comparison test among groups. A significant level of α = 0.05 was set for comparison between the groups. Results: Mann-Whitney U-test showed that each material showed lower microhardness values after immersion in acidic solution (P < 0.05). Paired t-test confirmed that microhardness for each composite did not change after immersion in distilled water (Control group) (P > 0.05). Significant changes were registered for all restorative materials after immersion in acidic solution for 1 day and 7 days (P < 0.05). Conclusion: The Filtek Supreme XTE, a nanofilled composite, and Admira Fusion, a nanohybrid ormocer-based composite, showed the best behavior. The Ceram X Universal (nanoceramic composite) although reached lower hardness values than the previous materials, but resisted well to the 1 week immersion in soft-drink. Finally, the Gradia Direct achieved the most disappointing results: Low microhardness values are justified by the nature of its filling (microfilled hybrid composite).

Background The purpose of this study was to evaluate the effect of surface pretreatment with 37% phosphoric acid on the enamel bond strength of different universal adhesives. Methods One hundred and sixty bovine permanent mandibular incisors freshly extracted were used as a substitute for human teeth. The materials tested in this study included 6 universal adhesives, and 2 self-etch adhesives as control. The teeth were assigned into 2 groups: In the first group, etching was performed using 37% phosphoric acid for 30 seconds. In the second group, no pretreatment agent was applied. After adhesive application, a nanohybrid composite resin was inserted into the enamel surface by packing the material into cylindrical-shaped plastic matrices. After storing, the specimens were placed in a universal testing machine. The normality of the data was calculated using the Kolmogorov-Smirnov test. Analysis of variance (ANOVA) was applied to determine whether significant differences in debond strength values existed among the various groups. Results Groups with phosphoric acid pretreatment showed significantly higher shear bond strength values than groups with no enamel pretreatment (p<0.001). No significant variation in shear strength values was detected when comparing the different adhesive systems applied onto enamel after orthophosphoric acid application (p>0.05). Conclusions All adhesives provide similar bond strength values when enamel pretreatment is applied even if compositions are different. Bond strength values are lower than promised by manufacturers.

Consumption of acidic beverages and foods could provoke erosive damage, both for teeth and for restorative materials. Temperatures of consumption could influence the erosive effects of these products. The aim of this in vitro study is to assess the influence of an acidic challenge on the weight loss of different restorative materials. Resin composites and glass-ionomer cements (GIC) were tested. The medium of storage was Coca-Cola (Coca-Cola, Coca-Cola Company, Milano, Italy) at two different temperatures, 4 and 37 °C, respectively for Group A and Group B. For each group, nine specimens were prepared for each material tested. After 7 days, weight was assessed for each sample, and the percentage weight loss was calculated. For all the resin composites (Groups 1–13), no significant weight losses were noticed. (<1%). Conversely, GICs (Groups 14 and 15) showed significant weight loss during the acidic challenge, which was reduced in the case of these materials that included a protective layer applied above. Significant differences were registered with intra-group analysis; weight loss for specimens immersed in Coca Cola at 37 °C was significantly higher for almost all materials tested when compared to specimens exposed to a cooler medium. In conclusion, all the resin composites showed reliable behaviour when exposed to acidic erosion, whereas glass-ionomer cements generally tended to solubilize.