Explore the vast range of titles available.

The aerosol properties of Mount Etna’s passive degassing plume and its short-term processes and radiative impact were studied in detail during the EPL-RADIO campaigns (summer 2016–2017), using a synergistic combination of observations and radiative transfer modelling. Summit observations show extremely high particulate matter concentrations. Using portable photometers, the first mapping of small-scale (within ∼ 20 km from the degassing craters) spatial variability of the average size and coarse-to-fine burden proportion of volcanic aerosols is obtained. A substantial variability of the plume properties is found at these spatial scales, revealing that processes (e.g. new particle formation and/or coarse aerosols sedimentation) are at play, which are not represented with current regional scale modelling and satellite observations. Statistically significant progressively smaller particles and decreasing coarse-to-fine particles burden proportion are found along plume dispersion. Vertical structures of typical passive degassing plumes are also obtained using observations from a fixed LiDAR station constrained with quasi-simultaneous photometric observations. These observations are used as input to radiative transfer calculations, to obtain the shortwave top of the atmosphere (TOA) and surface radiative effect of the plume. For a plume with an ultraviolet aerosol optical depth of 0.12–0.14, daily average radiative forcings of - 4.5 and - 7.0 W/m 2 , at TOA and surface, are found at a fixed location ∼ 7 km downwind the degassing craters. This is the first available estimation in the literature of the local radiative impact of a passive degassing volcanic plume.

Knowledge of aerosol radiative effects in the Tibetan Plateau (TP) is limited due to the lack of reliable aerosol optical properties, especially the single scattering albedo (SSA). We firstly reported in situ measurement of SSA in Lhasa using a cavity enhanced albedometer (CEA) at λ = 532 nm from 22nd May to 11th June 2021. Unexpected strong aerosol absorbing ability was observed with an average SSA of 0.69. Based on spectral absorptions measured by Aethalometer (AE33), black carbon (BC) was found to be the dominated absorbing species, accounting for about 83% at λ = 370 nm, followed by primary and secondary brown carbon (BrCpri and BrCsec). The average direct aerosol radiative forcing at the top of atmosphere (DARFTOA) was 2.83 W/m2, indicating aerosol warming effect on the Earth‐atmosphere system. Even though aerosol loading is low, aerosol heating effect plays a significant role on TP warming due to strong absorbing ability. Plain Language Summary The Tibetan Plateau (TP) has experienced rapid warming over the past decades, but the key factors affecting TP climate change haven't yet been clearly understood. Aerosol single scattering albedo (SSA) is a key optical parameter determining aerosol warming or cooling effect; however, reliable SSA measurement is scarce in TP. This study firstly reported in situ measurement of SSA in Lhasa and explored the direct radiative effect of aerosol on TP warming. Strong aerosol absorption, mainly contributed by black carbon (BC), was observed with an average SSA value of 0.69 in this city. Besides Lhasa, other sites over TP were also reported with low SSA (≤0.77) from surface measurement. The strong aerosol absorption could cause heating effect on the Earth‐atmosphere system. To relieve TP warming, reasonable pollutant emission control strategies should be taken urgently to weaken aerosol absorbing ability. Key Points Unexpected low aerosol single scattering albedo was observed in Lhasa via in situ measurement of multiple optical parameters simultaneously Black carbon was the dominant contributor (∼83%) to aerosol absorption at 370 nm, followed by primary and secondary brown carbon The strong absorption in Lhasa exerted positive direct aerosol radiative forcing (warming effect) at the top of atmosphere

The below-cloud irradiance in The Netherlands increased by over 10 Wm−2 in the past half century. It was hypothesized that this could be due to a decrease in the aerosol serving as cloud condensation nuclei, on which the cloud droplets form, in the following way. With unchanged macrophysics, clouds with a lower number of droplets are less reflective, in other words, they transmit more solar radiation. This hypothesis cannot be substantiated with data because of a generic absence of long-term information on cloud droplet number concentrations (CDNCs) worldwide. To assess the historic trend in CDNC, we used the Boucher and Lohmann (B&L) empirical relationship between CDNC and the mass concentration of the water-attracting hygroscopic aerosol components. The B&L parameterization was tested and validated with observations from the CHIEF cloud chamber, in which the formation of marine stratocumulus, the most frequent cloud type in The Netherlands, is simulated. This study will focus on summer periods because the irradiance governs the yearly average at this latitude. The summer trend of sulfate, the most dominant hygroscopic component of observed aerosol mass concentration, was analyzed with EBAS data from 1972 onwards. The average summer CDNCs were then calculated via the B&L parameterization, showing an upper limit of 380 cm−3 in the 1970s and decreasing to around 200 cm−3 in the 2010s. The associated increase in transmission for thin marine stratocumulus without overlying clouds would be, at most, 3.5 W m−2. Unobstructed stratocumuli occur only part of the time, and the change in irradiance based on the reduction in cloud droplet number is certainly small in comparison to the empirically derived trend of 10 W m−2.

Sea breeze (SB) phenomena may strongly influence air quality and lead to important effects on human health. In order to study the impact of SB dynamics on the properties and toxicity of aerosols, an atmospheric mobile unit was deployed during a field campaign performed in an urbanized and industrialized coastal area in Northern France. This unit combines aerosol samplers, two scanning lidars (Doppler and elastic) and an air-liquid interface (ALI, Vitrocell®) in vitro cell exposure device. Our study highlights that after the passage of an SB front, the top of the atmospheric boundary layer collapses as the thermal internal boundary layer (TIBL) develops, which leads to high aerosol extinction coefficient values (>0.4 km−1) and an increase of PM2.5 and NOx concentrations in the SB current. The number-size distribution of particles indicates a high proportion of fine particles (with diameter below 500 nm), while the volume-size distribution shows a major mode of coarse particles centered on 2–3 µm. Individual particle analyses performed by cryo-transmission scanning electron microscopy (cryo-TSEM)-EDX highlights that submicronic particles contained a high fraction of secondary compounds, which may result from nucleation and/or condensation of condensable species (vapors or gaseous species after photo-oxidation). Secondary aerosol (SA) formation can be enhanced in some areas, by the interaction between the SB flow and the upper continental air mass, particularly due to the effect of both turbulence and temperature/humidity gradients between these two contrasting air masses. Potential areas of SA formation are located near the ground, during the SB front passage and in the vicinity of the SB current top. During the sea breeze event, an increase in the oxidative stress and inflammation processes in exposed lung cells, compared to the unexposed cells, can also be seen. In some instances, short singularity periods are observed during SB, corresponding to a double flow structure. It consists of two adjacent SB currents that induce an important increase of the TIBL top, improving the pollutants dispersion. This is associated with a substantial decrease of aerosol mass concentrations.

Dust, maritime and dust-smoke mixture events observed during SHADOW2 (Sa HA ran D ust Over West Africa) field campaign are selected and analyzed by using Raman and GARRLiC retrievals. The derived aerosol optical and microphysical properties will be shown. Dust absorption profile and on ground level are derived from GARRLiC retrievals and Aethalometer measurements, respectively. Our results provide a closer insight about dust absorbing properties.

The physical and chemical properties of atmospheric aerosol particles are crucial in influencing global climate and ecosystem processes. Given the numerous studies highlighting adverse health effects from exposure to aerosol particulates, particularly Particulate Matter (PM), effective air quality management strategies are under consideration  (Annesi-Maesano et al. Eur Respir Soc 29(3):428–431. 2007 ). Herein, we introduce a predictive model— PmForecast —employing a self-adaptive long short-term memory (LSTM) architecture to predict PM 2.5 values in the real atmosphere. Specifically, we explore adopting a LSTM model to better benefit from temporal dimensions. PmForecast is strategically designed with four key phases: preprocessing, temporal attention, prediction horizon, and LSTM layers. By leveraging LSTM’s significant predictive ability in time-series data, the inclusion of temporal attention enhances the model’s specificity. Temporal dynamics modeling entails generating insights over time, utilizing temporal attention to extract essential characteristics from historical air pollutant concentrations, with the flexibility to adjust the historical data according to the forecasting period. To assess PmForecast , we consider measurements collected from the QameleO network, a sparse network of air-quality micro-stations deployed in Dijon, France. The self-adaptive capabilities of PmForecast allow the model to be dynamically updated, evaluating its performance and continuously tuning hyper-parameters based on the latest data trends. Our empirical evaluation reports that PmForecast outperforms the state of the art, achieving notable accuracy in both short-term and long-term predictions. The PmForecast deployment at scale can serve as a valuable tool for proactive decision-making and targeted interventions to mitigate the health risks associated with air pollution.

Formation of ultrafine particles (UFPs) in the urban atmosphere is expected to be less favored than in the rural atmosphere due to the high existing particle surface area acting as a sink for newly formed particles. Despite large condensation sink (CS) values, previous comparative studies between rural and urban sites reported higher frequency of new particle formation (NPF) events over urban sites in comparison to background sites as well as higher particle formation and growth rates attributed to the higher concentration of condensable species. The present study aims at a better understanding the environmental factors favoring, or disfavoring, atmospheric NPF over Lille, a large city in the north of France, and to analyze their impact on particle number concentration using a 4-year long-term dataset. The results highlight a strong seasonal variation of NPF occurrences with a maximum frequency observed during spring (27 events) and summer (53 events). It was found that high temperature (T>295 K), low relative humidity (RH <45 %), and high solar radiation are ideal to observe NPF events over Lille. Relatively high CS values (i.e., ∼2×10-2 s−1) are reported during event days suggesting that high CS does not inhibit the occurrence of NPF over the ATmospheric Observations in LiLLE (ATOLL) station. Moreover, the particle growth rate was positively correlated with temperatures most probably due to higher emission of precursors. Finally, the nucleation strength factor (NSF) was calculated to highlight the impact of those NPF events on particle number concentrations. NSF reached a maximum of four in summer, evidencing a huge contribution of NPF events to particle number concentration at this time of the year.

The MEGAPOLI (Megacities: Emissions, urban, regional and Global Atmospheric POLlution and climate effects, and Integrated tools for assessment and mitigation) experiment took place in July 2009. The aim of this campaign was to study the aging and reactions of aerosol and gas-phase emissions in the city of Paris. Three ground-based measurement sites and several mobile platforms including instrument equipped vehicles and the ATR-42 aircraft were involved. We present here the variations in particle- and gas-phase species over the city of Paris, using a combination of high-time resolution measurements aboard the ATR-42 aircraft. Particle chemical composition was measured using a compact time-of-flight aerosol mass spectrometer (C-ToF-AMS), giving detailed information on the non-refractory submicron aerosol species. The mass concentration of black carbon (BC), measured by a particle absorption soot photometer (PSAP), was used as a marker to identify the urban pollution plume boundaries. Aerosol mass concentrations and composition were affected by air-mass history, with air masses that spent longest time over land having highest fractions of organic aerosol and higher total mass concentrations. The Paris plume is mainly composed of organic aerosol (OA), BC, and nitrate aerosol, as well as high concentrations of anthropogenic gas-phase species such as toluene, benzene, and NOx. Using BC and CO as tracers for air-mass dilution, we observe the ratio of ΔOA / ΔBC and ΔOA / ΔCO increase with increasing photochemical age (−log(NOx / NOy)). Plotting the equivalent ratios of different organic aerosol species (LV-OOA, SV-OOA, and HOA) illustrate that the increase in OA is a result of secondary organic aerosol (SOA) formation. Within Paris the changes in the ΔOA / ΔCO are similar to those observed during other studies in London, Mexico City, and in New England, USA. Using the measured SOA volatile organic compounds (VOCs) species together with organic aerosol formation yields, we were able to predict ~50% of the measured organics. These airborne measurements during the MEGAPOLI experiment show that urban emissions contribute to the formation of OA and have an impact on aerosol composition on a regional scale.

Carbon monoxide, CO, and fine atmospheric particulate matter, PM2.5, are analyzed over the Guinean Gulf coastal region using the WRF-CHIMERE modeling system and observations during the beginning of the monsoon 2006 (from May to July), corresponding to the Africa Multidisciplinary Monsoon Analysis (AMMA) campaign period. Along the Guinean Gulf coast, the contribution of long-range pollution transport to CO or PM2.5 concentrations is important. The contribution of desert dust PM2.5 concentration decreases from ∼ 38 % in May to ∼ 5 % in July. The contribution of biomass burning PM2.5 concentration from Central Africa increases from ∼ 10 % in May to ∼ 52 % in July. The anthropogenic contribution is ∼ 30 % for CO and ∼ 10 % for PM2.5 during the whole period. When focusing only on anthropogenic pollution, frequent northward transport events from the coast to the Sahel are associated with periods of low wind and no precipitation. In June, anthropogenic PM2.5 and CO concentrations are higher than in May or July over the Guinean coastal region. Air mass dynamics concentrate pollutants emitted in the Sahel due to a meridional atmospheric cell. Moreover, a part of the pollution emitted remotely at the coast is transported and accumulated over the Sahel. Focusing the analysis on the period 8–15 June, anthropogenic pollutants emitted along the coastline are exported toward the north especially at the beginning of the night (18:00 to 00:00 UTC) with the establishment of the nocturnal low level jet. Plumes originating from different cities are mixed for some hours at the coast, leading to high pollution concentration, because of specific disturbed meteorological conditions.

Ambient particle number size distributions were measured in Paris, France, during summer (1–31 July 2009) and winter (15 January to 15 February 2010) at three fixed ground sites and using two mobile laboratories and one airplane. The campaigns were part of the Megacities: Emissions, urban, regional and Global Atmospheric POLlution and climate effects, and Integrated tools for assessment and mitigation (MEGAPOLI) project. New particle formation (NPF) was observed only during summer on approximately 50 % of the campaign days, assisted by the low condensation sink (about 10.7 ± 5.9 × 10−3 s−1). NPF events inside the Paris plume were also observed at 600 m altitude onboard an aircraft simultaneously with regional events identified on the ground. Increased particle number concentrations were measured aloft also outside of the Paris plume at the same altitude, and were attributed to NPF. The Paris plume was identified, based on increased particle number and black carbon concentration, up to 200 km away from the Paris center during summer. The number concentration of particles with diameters exceeding 2.5 nm measured on the surface at the Paris center was on average 6.9 ± 8.7 × 104 and 12.1 ± 8.6 × 104 cm−3 during summer and winter, respectively, and was found to decrease exponentially with distance from Paris. However, further than 30 km from the city center, the particle number concentration at the surface was similar during both campaigns. During summer, one suburban site in the NE was not significantly affected by Paris emissions due to higher background number concentrations, while the particle number concentration at the second suburban site in the SW increased by a factor of 3 when it was downwind of Paris.