Explore the vast range of titles available.

Desiccants play vital roles in dehumidification and atmospheric water harvesting; however, current desiccants have mediocre hygroscopicity, limited recyclability, and high energy consumption. Herein, we report a wood-inspired moisture pump based on electrospun nanofibrous membrane for solar-driven continuous indoor dehumidification. The developed moisture pump with multilayer wood-like cellular networks and interconnected open channels is composed of a desiccant layer and a photothermal layer. The desiccant layer exhibits an unprecedented moisture absorption capacity of 3.01 g g −1 at 90% relative humidity (RH), fast moisture absorption and transport rates, enabling atmospheric water harvesting. The photothermal layer shows a high solar absorption of 93%, efficient solar thermal conversion, and good moisture permeability, thus promoting water evaporation. The moisture pump efficiently reduces the indoor relative humidity to a comfort level (40‒60% RH) under one-sun illumination. This work opens the way to develop new-generation, high-performance nanofibrous membrane-based desiccants for energy-efficient humidity control and atmospheric water harvesting. Desiccants are important for dehumidification, but application is hindered by limited hygroscopicity, recyclability, and energy efficiency. Here, the authors report a moisture pump comprised of an electrospun nanofibrous memebrane for solar-driven continuous indoor dehumidification.

Ceramic aerogels are often used when thermal insulation materials are desired; however, they are still plagued by poor mechanical stability under thermal shock. Here, inspired by the dactyl clubs of mantis shrimp found in nature, which form by directed assembly into hierarchical, chiral and Bouligand (twisted plywood) structure exhibiting superior mechanical properties, we present a compositional and structural engineering strategy to develop strong, superelastic and fatigue resistance ceramic aerogels with chiral fibers array resembling Bouligand architecture. Benefiting from the stress dissipation, crack torsion and mechanical reinforcement of micro-/nano-scale Bouligand array, the tensile strength of these aerogels (170.38 MPa) is between one and two orders of magnitude greater than that of state-of-the-art nanofibrous aerogels. In addition, the developed aerogels feature low density and thermal conductivity, good compressive properties with rapid recovery from 80 % strain, and thermal stability up to 1200 °C, making them ideal for thermal insulation applications. Ceramic aerogels are limited by poor mechanical stability under thermal shock. Here, the authors report a compositional and structural engineering strategy to develop strong and superelastic ceramic aerogel with chiral fibers array resembling biomimetic Bouligand structures.

Background: The protective effect of quercetin on nonalcoholic fatty liver disease (NAFLD) has been reported, but its mechanism remains poorly understood. Recently, quercetin was reported to be capable of inhibiting ferroptosis, which is a recognized type of regulated cell death. Moreover, hepatic ferroptosis plays an important role in the progression of NAFLD, but experimental evidence is limited. Hence, our study aimed to investigate the effect of quercetin on hepatic ferroptosis in high-fat diet (HFD)-induced NAFLD and further elucidate the underlying molecular mechanism. Methods: C57BL/6J mice were fed either a normal diet (ND), an HFD, or an HFD supplemented with quercetin for 12 weeks. Hepatic lipid peroxidation, steatosis, ferroptosis and iron overload were examined. In vitro , steatotic L-02 cells was used to study the potential mechanism. Results: We found that the HFD caused lipid peroxidation, lipid accumulation and ferroptosis in the liver, which were rescued by quercetin supplementation. Consistent with the in vivo results, quercetin alleviated lipid droplet accumulation and reduced the levels of lipid reactive oxygen species (ROS) and ferroptosis in steatotic L-02 cells. Using a mitochondrial ROS (MtROS) scavenger (Mito-TEMPO) and ferroptosis specific inhibitor (Fer-1), we found that quercetin remarkably alleviated lipid droplet accumulation and lipid peroxidation by reducing MtROS-mediated ferroptosis in steatotic L-02 cells. Conclusion: Our data showed that HFD consumption induced lipid accumulation and triggered ferroptosis in liver, ultimately leading to hepatic lipotoxicity, which can be alleviated by quercetin. Findings from this study provide new insight into the mechanism by which quercetin can be used for the prevention and treatment of NAFLD.

Two-dimensional network-structured carbon nanoscale building blocks, going beyond graphene, are of fundamental importance, and creating such structures and developing their applications have broad implications in environment, electronics and energy. Here, we report a facile route, based on electro-spraying/netting, to self-assemble two-dimensional carbon nanostructured networks on a large scale. Manipulation of the dynamic ejection, deformation and assembly of charged droplets by control of Taylor cone instability and micro-electric field, enables the creation of networks with characteristics combining nanoscale diameters of one-dimensional carbon nanotube and lateral infinity of two-dimensional graphene. The macro-sized (meter-level) carbon nanostructured networks show extraordinary nanostructural properties, remarkable flexibility (soft polymeric mechanics having hard inorganic matrix), nanoscale-level conductivity, and outstanding performances in distinctly different areas like filters, separators, absorbents, and wearable electrodes, supercapacitors and cells. This work should make possible the innovative design of high-performance, multi-functional carbon nanomaterials for various applications. Creating two-dimensional carbon nanoscale building blocks is of fundamental importance, but is extremely challenging. Here, the authors report a facile electro-spraying/netting technique for self-assembly of two-dimensional carbon nanostructured networks with superflexibility and multi-functionality.

Chemical warfare agents (CWAs) significantly threaten human peace and global security. Most personal protective equipment (PPE) deployed to prevent exposure to CWAs is generally devoid of self-detoxifying activity. Here we report the spatial rearrangement of metal-organic frameworks (MOFs) into superelastic lamellar-structured aerogels based on a ceramic network-assisted interfacial engineering protocol. The optimized aerogels exhibit efficient adsorption and decomposition performance against CWAs either in liquid or aerosol forms (half-life of 5.29 min, dynamic breakthrough extent of 400 L g −1 ) due to the preserved MOF structure, van-der-Waals barrier channels, minimized diffusion resistance (~41% reduction), and stability over a thousand compressions. The successful construction of the attractive materials offers fascinating perspectives on the development of field-deployable, real-time detoxifying, and structurally adaptable PPE that could be served as outdoor emergency life-saving devices against CWAs threats. This work also provides a guiding toolbox for incorporating other critical adsorbents into the accessible 3D matrix with enhanced gas transport properties. Personal protective equipment used to prevent exposure to chemical warfare agents are devoid of detoxifying activity. Here, the authors report MOF aerogels via a hydrogen bonding-assisted interfacial engineering strategy for nerve agent decomposition.

α-L-rhamnosidases play a key role in the metabolism and biodegradation of dietary flavonoid glycosides. We have developed a novel microplate spectrophotometric method to rapidly evaluate the conversion rates and substrate selectivities of mesophilic α-L-rhamnosidases towards citrus flavanone diglycosides by combining with a high-active and thermophilic β-D-glucosidase based on UV-visible spectral differences between citrus flavanone diglycosides and the corresponding aglycones under alkaline conditions. Furthermore, catalytic activities and enzyme kinetics of four α-L-rhamnosidases from human gut bacteria on various dietary flavonoid glycosides with different glycosidic bonds from various subclasses have been explored by HPLC. The α-L-rhamnosidase BtRha78A specifically removed the rhamnose group from the flavones, flavanones and flavonols diglycosides with the α-1,6 glycosidic bonds. Moreover, BtRha78A displayed higher catalytic activities on the rutinose group at 7-OH of the aglycones than at 3-OH. HFM-RhaA preferred to catalyze the flavones, flavanones and dihydrochalcones diglycosides with the α-1,2 glycosidic linkages at the 7-OH. However, this enzyme also showed high catalytic activity on the flavonol diglycoside rutin with the α-1,6 glycosidic bonds at the 3-OH. HFM-RhaC exhibited certain hydrolytic abilities towards all flavonoid diglycosides, and displayed higher activities on the flavonoid diglycosides with the α-1,6 glycosidic bonds. HFM-Rha78 weakly hydrolyzed the flavones, flavanones and dihydrochalcones diglycosides with the α-1,2 glycosidic bonds, and the flavonols diglycosides with α-1,6 glycosidic bonds. All four α-L-rhamnosidases from human gut bacteria did not exhibit catalytic activity towards the flavonoid glycosides with the α-1 glycosidic bonds. It was revealed that the α-L-rhamnosidases from human gut bacteria possessed diverse substrate selectivity on dietary flavonoid diglycosides. The structural basis for the specificity of BtRha78A on the flavonoid diglycosides with α-1,6 glycosidic bonds and the preference of HFM-RhaA on the flavonoid diglycosides with α-1,2 glycosidic bonds have been analyzed by molecular docking.

The black phase of formamidinium lead iodide (FAPbI 3 ) perovskite shows huge promise as an efficient photovoltaic, but it is not favoured energetically at room temperature, meaning that the undesirable yellow phases are always present alongside it during crystallization 1 – 4 . This problem has made it difficult to formulate the fast crystallization process of perovskite and develop guidelines governing the formation of black-phase FAPbI 3 (refs. 5 , 6 ). Here we use in situ monitoring of the perovskite crystallization process to report an oriented nucleation mechanism that can help to avoid the presence of undesirable phases and improve the performance of photovoltaic devices in different film-processing scenarios. The resulting device has a demonstrated power-conversion efficiency of 25.4% (certified 25.0%) and the module, which has an area of 27.83 cm 2 , has achieved an impressive certified aperture efficiency of 21.4%. The black phase of formamidinium lead iodide perovskite is used to make highly efficient solar cells, and a technique to improve its purity and stability by controlling crystal nucleation could make them even better.

Ceramic aerogels are attractive for many applications due to their ultralow density, high porosity, and multifunctionality but are limited by the typical trade-off relationship between mechanical properties and thermal stability when used in extreme environments. In this work, we design and synthesize ceramic nanofibrous aerogels with three-dimensional (3D) interwoven crimped-nanofibre structures that endow the aerogels with superior mechanical performances and high thermal stability. These ceramic aerogels are synthesized by a direct and facile route, 3D reaction electrospinning. They display robust structural stability with structure-derived mechanical ultra-stretchability up to 100% tensile strain and superior restoring capacity up to 40% tensile strain, 95% bending strain and 60% compressive strain, high thermal stability from −196 to 1400 °C, repeatable stretchability at working temperatures up to 1300 °C, and a low thermal conductivity of 0.0228 W m −1 K −1 in air. This work would enable the innovative design of high-performance ceramic aerogels for various applications. Ceramic aerogels are generally brittle and often tend to structurally collapse under large external tensile strain. Here the authors synthesize large-scale stretchable ceramic aerogels with interwoven crimped nanofibers by combining electrohydrodynamic method and 3D reaction electrospinning.

Although the composition of the board of directors has important implications for different aspects of firm performance, prior studies tend to focus on financial performance. The effects of board composition on corporate social responsibility (CSR) performance remain an under-researched area, particularly in the period following the enactment of the Sarbanes-Oxley Act of 2002 (SOX). This article specifically examines two important aspects of board composition (i.e., the presence of outside directors and the presence of women directors) and their relationship with CSR performance in the Post-SOX era. With data covering over 500 of the largest companies listed on the U.S. stock exchanges and spanning 64 different industries, we find empirical evidence showing that greater presence of outside and women directors is linked to better CSR performance within a firm's industry. Treating CSR performance as the reflection of a firm's moral legitimacy, our study suggests that deliberate structuring of corporate boards may be an effective approach to enhance a firm's moral legitimacy.

There is an increasing demand worldwide on advanced two-dimensional (2D) nanofibrous networks with applications ranging from environmental protection and electrical devices to bioengineering. Design of such nanoarchitectured materials has been considered a long-standing challenge. Herein, we report a direct electronetting technology for the fabrication of self-assembled 2D nanoarchitectured networks (nano-nets) from various materials. Tailoring of the precursor solution and of the microelectric field allows charged droplets, which are ejected from a Taylor cone, to levitate, deform and phase separate before they self-assemble a 2D nanofibre network architecture. The fabricated nano-nets show mechanical robustness and benefit from nanostructural properties such as enhanced surface wettability, high transparency, separation and improved air filtration properties. Calcination of the nano-nets results in the formation of carbon nano-nets with electric conductivity and titanium dioxide nano-nets with bioprotective properties. Nanofibrous networks are applied in environmental protection and electrical or bioengineering and experience a great demand, but the design of these functional materials is challenging. Here the authors demonstrate an electronetting technology for fabricating self-assembled nanonets from various materials.