Explore the vast range of titles available.

Five nearly identical fragments of specialized bone tools, interpreted as lissoirs (French for “smoothers”), have been found at two Middle Paleolithic sites in southwest France. The finds span three separate archaeological deposits, suggesting continuity in the behavior of late Neandertals. Using standard morphological assessments, we determined that the lissoirs were produced on ribs of medium-sized ungulates. However, since these bones are highly fragmented and anthropogenically modified, species determinations were challenging. Also, conservative curation policy recommends minimizing destructive sampling of rare, fragile, or small artifacts for molecular identification methods. To better understand raw material selection for these five lissoirs , we reassess their taxonomy using a non-destructive ZooMS methodology based on triboelectric capture of collagen. We sampled four storage containers and obtained identifiable MALDI-TOF MS collagen fingerprints, all indicative of the same taxonomic clade, which includes aurochs and bison ( Bos sp. and Bison sp.). The fifth specimen, which was stored in a plastic bag, provided no useful MALDI-TOF MS spectra. We show that the choice of large bovid ribs in an archaeological layer dominated by reindeer ( Rangifer tarandus ) demonstrates strategic selection by these Neandertals. Furthermore, our results highlight the value of a promising technique for the non-destructive analysis of bone artifacts.

Modern humans replaced Neandertals ∼40,000 y ago. Close to the time of replacement, Neandertals show behaviors similar to those of the modern humans arriving into Europe, including the use of specialized bone tools, body ornaments, and small blades. It is highly debated whether these modern behaviors developed before or as a result of contact with modern humans. Here we report the identification of a type of specialized bone tool, lissoir , previously only associated with modern humans. The microwear preserved on one of these lissoir is consistent with the use of lissoir in modern times to obtain supple, lustrous, and more impermeable hides. These tools are from a Neandertal context proceeding the replacement period and are the oldest specialized bone tools in Europe. As such, they are either a demonstration of independent invention by Neandertals or an indication that modern humans started influencing European Neandertals much earlier than previously believed. Because these finds clearly predate the oldest known age for the use of similar objects in Europe by anatomically modern humans, they could also be evidence for cultural diffusion from Neandertals to modern humans.

About 10 years ago, a new experimental design, based on a mechanical flaking apparatus, allowed complete control over several independent variables essential to flintknapping. This experimental setting permitted the investigation of more fundamental aspects of stone technology, including the effect of particular platform attributes, core surface morphology, and the application of force on flake size and shape. These experiments used cores made of glass that were molded to exact configurations. Here we set out to investigate whether results obtained from experiments on glass cores can be extended to other materials, in this case varieties of basalt, flint, and obsidian that were cut to the exact core configurations. We focused on the relationships between the independent variables of exterior platform angle and platform depth and dependent variables of overall size (weight or mass), volume, and linear dimensions. It was found that in almost every comparison, all four materials show similar relationships in nature and degree. What differs instead is the amount of force needed to detach a flake. In other words, given the same core morphology and platform attributes the resulting flakes will be the same, but harder materials require more force to remove the flake. These results were additionally verified on Middle Paleolithic archeological materials made mostly on Late Cretaceous flints. Our results demonstrate that experiments using glass cores are valid and can be generalized and extended to other materials.

To understand the ways in which past stone knappers controlled the morphology of the flakes they produced, archaeologists have focused on examining the effects of striking platform attributes on flake size and shape. Among the variables commonly considered, platform width has routinely been noted to correlate with flake size and hence used to explain past knapping behaviors. Yet, the influence of platform width on flake variation remains equivocal due to the fact that the attribute is not under the direct control of the knapper. Instead, platform width tends to be treated as a by-product of other independent knapping parameters, such as platform depth. In this study, we hypothesize that platform width acts as an intermediary that intervenes the effect of other independent variables on flake attributes. By analyzing experimental flakes produced under both controlled and replicative settings, the results support the hypothesis that platform width mediates the effect of platform depth on flake width, such that flakes with relatively larger platform widths are generally wider but no longer. This finding provides a way to incorporate platform width into discussions of the interrelationships among knapping variables, and highlights the importance of platform width for investigating how past knappers controlled flake production through platform manipulation.

Four ways archaeologists have tried to gain insights into how flintknapping creates lithic variability are fracture mechanics, controlled experimentation, replication and attribute studies of lithic assemblages. Fracture mechanics has the advantage of drawing more directly on first principles derived from physics and material sciences, but its relevance to controlled experimentation, replication and lithic studies more generally has been limited. Controlled experiments have the advantage of being able to isolate and quantify the contribution of individual variables to knapping outcomes, and the results of these experiments have provided models of flake formation that when applied to the archaeological record of flintknapping have provided insights into past behavior. Here we develop a linkage between fracture mechanics and the results of previous controlled experiments to increase their combined explanatory and predictive power. We do this by documenting the influence of Herztian cone formation, a constant in fracture mechanics, on flake platforms. We find that the platform width is a function of the Hertzian cone constant angle and the geometry of the platform edge. This finding strengthens the foundation of one of the more influential models emerging from the controlled experiments. With additional work, this should make it possible to merge more of the experimental results into a more comprehensive model of flake formation.

Blank size and form represent one of the main sources of variation in lithic assemblages. They reflect economic properties of blanks and factors such as efficiency and use life. These properties require reliable measures of size, namely edge length and surface area. These measures, however, are not easily captured with calipers. Most attempts to quantify these features employ estimates; however, the efficacy of these estimations for measuring critical features such as blank surface area and edge length has never been properly evaluated. In addition, these parameters are even more difficult to acquire for retouched implements as their original size and hence indication of their previous utility have been lost. It has been suggested, in controlled experimental conditions, that two platform variables, platform thickness and exterior platform angle, are crucial in determining blank size and shape meaning that knappers can control the interaction between size and efficiency by selecting specific core angles and controlling where fracture is initiated. The robustness of these models has rarely been tested and confirmed in context other than controlled experiments. In this paper, we evaluate which currently employed caliper measurement methods result in the highest accuracy of size estimations of blanks, and we evaluate how platform variables can be used to indirectly infer aspects of size on retouched artifacts. Furthermore, we investigate measures of different platform management strategies that control the shape and size of artifacts. To investigate these questions, we created an experimental lithic assemblage, we digitized images to calculate 2D surface area and edge length, which are used as a point of comparison for the caliper measurements and additional analyses. The analysis of aspects of size determinations and the utility of blanks contributes to our understanding of the technological strategies of prehistoric knappers and what economic decisions they made during process of blank production.

Archaeologists have explored a wide range of topics regarding archaeological stone tools and their connection to past human lifeways through experimentation. Controlled experimentation systematically quantifies the empirical relationships among different flaking variables under a controlled and reproducible setting. This approach offers a platform to generate and test hypotheses about the technological decisions of past knappers from the perspective of basic flaking mechanics. Over the past decade, Harold Dibble and colleagues conducted a set of controlled flaking experiments to better understand flake variability using mechanical flaking apparatuses and standardized cores. Results of their studies underscore the dominant impact of exterior platform angle and platform depth on flake size and shape and have led to the synthesis of a flake formation model, namely the EPA-PD model. However, the results also illustrate the complexity of the flake formation process through the influence of other parameters such as core surface morphology and force application. Here we review the work of Dibble and colleagues on controlled flaking experiments by summarizing their findings to date. Our goal is to synthesize what was learned about flake variability from these controlled experiments to better understand the flake formation process. With this paper, we are including all of the data produced by these prior experiments and an explanation of the data in the Supplementary Information.

The fossil record suggests that at least two major human dispersals occurred across the Eurasian steppe during the Late Pleistocene. Neanderthals and Modern Humans moved eastward into Central Asia, a region intermittently occupied by the enigmatic Denisovans. Genetic data indicates that the Denisovans interbred with Neanderthals near the Altai Mountains (South Siberia) but where and when they met H. sapiens is yet to be determined. Here we present archaeological evidence that document the timing and environmental context of a third long-distance population movement in Central Asia, during a temperate climatic event around 45,000 years ago. The early occurrence of the Initial Upper Palaeolithic, a techno-complex whose sudden appearance coincides with the first occurrence of H. sapiens in the Eurasian steppes, establishes an essential archaeological link between the Siberian Altai and Northwestern China . Such connection between regions provides empirical ground to discuss contacts between local and exogenous populations in Central and Northeast Asia during the Late Pleistocene.

To understand the ways in which past stone knappers controlled the morphology of the flakes they produced, archaeologists have focused on examining the effects of striking platform attributes on flake size and shape. Among the variables commonly considered, platform width has routinely been noted to correlate with flake size and hence used to explain past knapping behaviors. Yet, the influence of platform width on flake variation remains equivocal due to the fact that the attribute is not under the direct control of the knapper. Instead, platform width tends to be treated as a by-product of other independent knapping parameters, such as platform depth. In this study, we hypothesize that platform width acts as an intermediary that intervenes the effect of other independent variables on flake attributes. By analyzing experimental flakes produced under both controlled and replicative settings, the results support the hypothesis that platform width mediates the effect of platform depth on flake width, such that flakes with relatively larger platform widths are generally wider but no longer. This finding provides a way to incorporate platform width into discussions of the interrelationships among knapping variables, and highlights the importance of platform width for investigating how past knappers controlled flake production through platform manipulation.