Explore the vast range of titles available.

The Goddard Earth Observing System composition forecast (GEOS-CF) system is a high-resolution (0.25 degree) global constituent prediction system from NASA’s Global Modeling and Assimilation Office (GMAO). GEOS-CF offers a new tool for atmospheric chemistry research, with the goal to supplement NASA’s broad range of space-based and in-situ observation sand to support flight campaign planning, support of satellite observations, and air quality research. GEOS-CF expands on the GEOS weather and aerosol modeling system by introducing the GEOS-Chem chemistry module to provide analyses and 5-day forecasts of atmospheric constituents including ozone (O3), carbon monoxide (CO), nitrogen dioxide (NO2), and fine particulate matter (PM2.5). The chemistry module integrated in GEOS-CF is identical to the offline GEOS-Chem model and readily benefits from the innovations provided by the GEOS-Chem community.Evaluation of GEOS-CF against satellite, ozone sonde and surface observations show realistic simulated concentrations of O3, NO2, and CO, with normalized mean biases of -0.1 to -0.3, normalized root mean square errors (NRMSE) between 0.1-0.4, and correlations between 0.3-0.8. Comparisons against surface observations highlight the successful representation of air pollutants under a variety of meteorological conditions, yet also highlight current limitations, such as an over prediction of summertime ozone over the Southeast United States. GEOS-CFv1.0 generally overestimates aerosols by 20-50% due to known issues in GEOS-Chem v12.0.1 that have been addressed in later versions.The 5-day hourly forecasts have skill scores comparable to the analysis. Model skills can be improved significantly by applying a bias-correction to the surface model output using a machine-learning approach.

Despite its importance for the global oxidative capacity, spatially resolved trends and variability of the hydroxyl radical (OH) are poorly constrained. We demonstrate the utility of a tropospheric column OH (TCOH) product, created from machine learning and satellite proxy data, in determining the spatial variability in trends of tropical OH over the oceans during September through November. While OH increases domain‐wide by 2.1%/decade from 2005–2019, we find significant spatial heterogeneity in regional trends, with decreases in some areas of 2.5%/decade. Our analysis of the trends in the proxy data indicate anthropogenic‐driven changes in emissions of OH drivers as well as increasing temperatures cause these trends. This OH product is potentially a significant advance in constraining OH spatial variability and serves as a useful complement to existing tools in understanding the atmospheric oxidative capacity. Comprehensive observations of TCOH are required to assess the fidelity of this method. Plain Language Summary Hydroxyl is a chemical that removes many gases from the atmosphere, including methane, an important greenhouse gas. To understand recent trends in methane, we must also understand recent trends in hydroxyl. Because of various limitations, we unfortunately do not have long‐term, direct observations of hydroxyl. To address this problem, we have developed a machine learning model that uses satellite observations of variables relevant to hydroxyl chemistry and variability to calculate hydroxyl. We demonstrate that this product can be used to understand trends and variability of hydroxyl over the tropical oceans. While, on average, hydroxyl increases from 2005–2019, we show that this is not a universal trend and that hydroxyl actually decreases in multiple regions over the same time period. Using satellite observations of various chemicals, we demonstrate that changes in emissions due to human activity and increases in temperature cause many of these trends. This product is potentially a significant advance in understanding changes in hydroxyl and could be a useful complement to more traditional methods in understanding atmospheric methane. Key Points Satellite proxies can constrain the spatial distribution of trends and variability of the hydroxyl radical in the tropics Changes in biomass burning, temperature, and other emissions lead to large spatial heterogeneity in hydroxyl radical trends More direct observations of the hydroxyl radical and its drivers are needed to further validate the fidelity of our methodology

Satellite observations of formaldehyde (HCHO) columns provide top-down constraints on emissions of highly reactive volatile organic compounds (HRVOCs). This approach has been used previously in the US to estimate isoprene emissions from vegetation, but application to anthropogenic emissions has been stymied by lack of a discernable HCHO signal. Here we show that temporal oversampling of HCHO data from the Ozone Monitoring Instrument (OMI) for 2005-2008 enables detection of urban and industrial plumes in eastern Texas including Houston, Port Arthur, and Dallas Fort Worth. By spatially integrating the HCHO enhancement in the Houston plume observed by OMI we estimate an anthropogenic HCHO source of 250 140 kmol h−1. This implies that anthropogenic HRVOC emissions in Houston are 4.8 2.7 times higher than reported by the US Environmental Protection Agency inventory, and is consistent with field studies identifying large ethene and propene emissions from petrochemical industrial sources.

We present a methodology that uses gradient-boosted regression trees (a machine learning technique) and a full-chemistry simulation (i.e., training dataset) from a chemistry–climate model (CCM) to efficiently generate a parameterization of tropospheric hydroxyl radical (OH) that is a function of chemical, dynamical, and solar irradiance variables. This surrogate model of OH is designed to be integrated into a CCM and allow for computationally efficient simulation of nonlinear feedbacks between OH and tropospheric constituents that have loss by reaction with OH as their primary sinks (e.g., carbon monoxide (CO), methane (CH4), volatile organic compounds (VOCs)). Such a model framework is advantageous for studies that require multi-decadal simulations of CH4 or multi-year sensitivity simulations to understand the causes of trends and variations of CO and CH4. To allow the user to easily target the training dataset towards a desired application, we are outlining a methodology to generate a parameterization of OH and not presenting an “off-the-shelf” version of a parameterization to be incorporated into a CCM. This provides for the relatively easy creation of a new parameterization in response to, for example, changes in research goals or the underlying CCM chemistry and/or dynamics schemes. We show that a sample parameterization of OH generated from a CCM simulation is able to reproduce OH concentrations with a normalized root-mean-square error of approximately 5 % and capture the global mean methane lifetime within approximately 1 %. Our calculated accuracy of the parameterization assumes inputs being within the bounds of the training dataset. Large excursions from these bounds will likely decrease the overall accuracy. However, we show that the sample parameterization predicts large deviations in OH for an El Niño event that was not part of the training dataset and that the spatial distribution and strength of these deviations are consistent with the event. This result gives confidence in the fidelity of a parameterization developed with our methodology to simulate the spatial and temporal responses of OH to perturbations from large variations in the chemical, dynamical, and solar irradiance drivers of OH. In addition, we discuss how two machine learning metrics, Gain feature importance and Shapley additive explanations values, indicate that the behavior of a parameterization of OH generally accords with our understanding of OH chemistry, even though there are no physics- or chemistry-based constraints on the parameterization.

Ozone (O3) precursor emissions influence regional and global climate and air quality through changes in tropospheric O3 and oxidants, which also influence methane (CH4) and sulfate aerosols (SO42−). We examine changes in the tropospheric composition of O3, CH4, SO42− and global net radiative forcing (RF) for 20% reductions in global CH4 burden and in anthropogenic O3 precursor emissions (NOx, NMVOC, and CO) from four regions (East Asia, Europe and Northern Africa, North America, and South Asia) using the Task Force on Hemispheric Transport of Air Pollution Source‐Receptor global chemical transport model (CTM) simulations, assessing uncertainty (mean ± 1 standard deviation) across multiple CTMs. We evaluate steady state O3responses, including long‐term feedbacks via CH4. With a radiative transfer model that includes greenhouse gases and the aerosol direct effect, we find that regional NOx reductions produce global, annually averaged positive net RFs (0.2 ± 0.6 to 1.7 ± 2 mWm−2/Tg N yr−1), with some variation among models. Negative net RFs result from reductions in global CH4 (−162.6 ± 2 mWm−2 for a change from 1760 to 1408 ppbv CH4) and regional NMVOC (−0.4 ± 0.2 to −0.7 ± 0.2 mWm−2/Tg C yr−1) and CO emissions (−0.13 ± 0.02 to −0.15 ± 0.02 mWm−2/Tg CO yr−1). Including the effect of O3 on CO2 uptake by vegetation likely makes these net RFs more negative by −1.9 to −5.2 mWm−2/Tg N yr−1, −0.2 to −0.7 mWm−2/Tg C yr−1, and −0.02 to −0.05 mWm−2/Tg CO yr−1. Net RF impacts reflect the distribution of concentration changes, where RF is affected locally by changes in SO42−, regionally to hemispherically by O3, and globally by CH4. Global annual average SO42− responses to oxidant changes range from 0.4 ± 2.6 to −1.9 ± 1.3 Gg for NOxreductions, 0.1 ± 1.2 to −0.9 ± 0.8 Gg for NMVOC reductions, and −0.09 ± 0.5 to −0.9 ± 0.8 Gg for CO reductions, suggesting additional research is needed. The 100‐year global warming potentials (GWP100) are calculated for the global CH4 reduction (20.9 ± 3.7 without stratospheric O3 or water vapor, 24.2 ± 4.2 including those components), and for the regional NOx, NMVOC, and CO reductions (−18.7 ± 25.9 to −1.9 ± 8.7 for NOx, 4.8 ± 1.7 to 8.3 ± 1.9 for NMVOC, and 1.5 ± 0.4 to 1.7 ± 0.5 for CO). Variation in GWP100 for NOx, NMVOC, and CO suggests that regionally specific GWPs may be necessary and could support the inclusion of O3 precursors in future policies that address air quality and climate change simultaneously. Both global net RF and GWP100 are more sensitive to NOx and NMVOC reductions from South Asia than the other three regions. Key Points Radiative forcing of ozone precursor depends on location of emissions CH4, CO, and NMVOC reductions reduce climate forcing better than NOx reductions Regionally specific forcings support ozone precursors in climate policy

The Ozone Monitoring Instrument (OMI) onboard NASA's Aura satellite has been providing global observations of the ozone layer and key atmospheric pollutant gases, such as nitrogen dioxide (NO2) and sulfur dioxide (SO2), since October 2004. The data products from the same instrument provide consistent spatial and temporal coverage and permit the study of anthropogenic and natural emissions on local-to-global scales. In this paper, we examine changes in SO2 and NO2 over some of the world's most polluted industrialized regions during the first decade of OMI observations. In terms of regional pollution changes, we see both upward and downward trends, sometimes in opposite directions for NO2 and SO2, for different study areas. The trends are, for the most part, associated with economic and/or technological changes in energy use, as well as regional regulatory policies. Over the eastern US, both NO2 and SO2 levels decreased dramatically from 2005 to 2015, by more than 40 and 80 percent, respectively, as a result of both technological improvements and stricter regulations of emissions. OMI confirmed large reductions in SO2 over eastern Europe's largest coal-fired power plants after installation of flue gas desulfurization devices. The North China Plain has the world's most severe SO2 pollution, but a decreasing trend has been observed since 2011, with about a 50 percent reduction in 2012-2015, due to an economic slowdown and government efforts to restrain emissions from the power and industrial sectors. In contrast, India's SO2 and NO2 levels from coal power plants and smelters are growing at a fast pace, increasing by more than 100 and 50 percent, respectively, from 2005 to 2015. Several SO2 hot spots observed over the Persian Gulf are probably related to oil and gas operations and indicate a possible underestimation of emissions from these sources in bottom-up emission inventories. Overall, OMI observations have proved valuable in documenting rapid changes in air quality over different parts of the world during last decade. The baseline established during the first 11 years of OMI is indispensable for the interpretation of air quality measurements from current and future satellite atmospheric composition missions.

We present a method to infer CO2 emissions from individual power plants based on satellite observations of co-emitted nitrogen dioxide (NO2), which could serve as complementary verification of bottom-up inventories or be used to supplement these inventories. We demonstrate its utility on eight large and isolated US power plants, where accurate stack emission estimates of both gases are available for comparison. In the first step of our methodology, we infer nitrogen oxides (NOx) emissions from US power plants using Ozone Monitoring Instrument (OMI) NO2 tropospheric vertical column densities (VCDs) averaged over the ozone season (May–September) and a “top-down” approach that we previously developed. Second, we determine the relationship between NOx and CO2 emissions based on the direct stack emissions measurements reported by continuous emissions monitoring system (CEMS) programs, accounting for coal quality, boiler firing technology, NOx emission control device type, and any change in operating conditions. Third, we estimate CO2 emissions for power plants using the OMI-estimated NOx emissions and the CEMS NOx∕CO2 emission ratio. We find that the CO2 emissions estimated by our satellite-based method during 2005–2017 are in reasonable agreement with the US CEMS measurements, with a relative difference of 8 %±41 % (mean ± standard deviation). The broader implication of our methodology is that it has the potential to provide an additional constraint on CO2 emissions from power plants in regions of the world without reliable emissions accounting. We explore the feasibility by comparing the derived NOx∕CO2 emission ratios for the US with those from a bottom-up emission inventory for other countries and applying our methodology to a power plant in South Africa, where the satellite-based emission estimates show reasonable consistency with other independent estimates. Though our analysis is limited to a few power plants, we expect to be able to apply our method to more US (and world) power plants when multi-year data records become available from new OMI-like sensors with improved capabilities, such as the TROPOspheric Monitoring Instrument (TROPOMI), and upcoming geostationary satellites, such as the Tropospheric Emissions: Monitoring Pollution (TEMPO) instrument.

The 2018 NASA Health and Air Quality Applied Science Team (HAQAST) “Indicators” Tiger Team collaboration between NASA‐supported scientists and civil society stakeholders aimed to develop satellite‐derived global air pollution and climate indicators. This Commentary shares our experience and lessons learned. Together, the team developed methods to track wildfires, dust storms, pollen counts, urban green space, nitrogen dioxide concentrations and asthma burdens, tropospheric ozone concentrations, and urban particulate matter mortality. Participatory knowledge production can lead to more actionable information but requires time, flexibility, and continuous engagement. Ground measurements are still needed for ground truthing, and sustained collaboration over time remains a challenge. Plain Language Summary Recent advances in satellite remote sensing enable observation‐based tracking of climate change and air pollution with relatively high spatial resolution globally. The 2018 NASA Health and Air Quality Applied Science Team (HAQAST) “Indicators” Tiger Team launched a collaboration between ~20 NASA‐supported scientists and civil society stakeholders to develop satellite‐derived global air pollution and climate indicators. This Commentary demonstrates the range of air quality and climate change tracking uses for satellite data and shares our experience and lessons learned, which can inform future problem‐driven science‐stakeholder collaborative efforts. Together, the team developed methods to track wildfires, dust storms, pollen, urban green space, nitrogen dioxide concentrations and asthma burdens, tropospheric ozone concentrations, and urban fine particulate matter mortality. Lessons learned include that participatory knowledge production can lead to more actionable information for stakeholders but requires time and dedicated attention. Stakeholder engagement is valuable at each stage, from developing more nascent data sets to operationalizing mature data sets. Flexibility is critical, since stakeholder needs evolve and new synergies emerge when there are engagements across a wide range of stakeholders and teams. However, additional ground measurements are needed to ground truth satellite observations, and sustained collaboration between the researchers and stakeholders after extramural support ends remains a challenge. Key Points The NASA Health and Air Quality Applied Science Team “Indicators” Tiger Team developed satellite‐based air quality and climate indicators Participatory knowledge production can lead to more useful information for stakeholders but requires continuous engagement and flexibility Ground measurements are still needed, and sustained collaboration between the researchers and stakeholders over time remains a challenge

Model studies typically estimate intercontinental influence on surface ozone by perturbing emissions from a source continent and diagnosing the ozone response in the receptor continent. Since the response to perturbations is non‐linear due to chemistry, conclusions drawn from different studies may depend on the magnitude of the applied perturbation. We investigate this issue for intercontinental transport between North America, Europe, and Asia with sensitivity simulations in three global chemical transport models. In each region, we decrease anthropogenic emissions of NOx and nonmethane volatile organic compounds (NMVOCs) by 20% and 100%. We find strong nonlinearity in the response to NOx perturbations outside summer, reflecting transitions in the chemical regime for ozone production. In contrast, we find no significant nonlinearity to NOx perturbations in summer or to NMVOC perturbations year‐round. The relative benefit of decreasing NOx vs. NMVOC from current levels to abate intercontinental pollution increases with the magnitude of emission reductions.

The combination of air quality (AQ) data from satellites and low‐cost sensor systems, along with output from AQ models, have the potential to augment high‐quality, regulatory‐grade data in countries with in situ monitoring networks and provide much needed AQ information in countries without them, including Low and Moderate Income Countries (LMICs). We demonstrate the potential of free and publicly available USA National Aeronautics and Space Administration (NASA) resources, which include capacity building activities, satellite data, and global AQ forecasts, to provide cost‐effective, and reliable AQ information to health and AQ professionals around the world. We provide illustrative case studies that highlight how global AQ forecasts along with satellite data may be used to characterize AQ on urban to regional scales, including to quantify pollution concentrations, identify pollution sources, and track the long‐range transport of pollution. We also provide recommendations to data product developers to facilitate and broaden usage of NASA resources by health and AQ stakeholders. Plain Language Summary We demonstrate that free and publicly available USA National Aeronautics and Space Administration (NASA) resources, which include capacity building activities, satellite data, and global air quality (AQ) forecasts, have the potential to augment air pollution data from surface monitors and low‐cost sensors. These resources are valuable for health and air quality stakeholders who have no or little access to air pollution data for their communities. For instance, they are a viable and cost‐effective option for stakeholders in Low and Moderate Income Countries (LMICs) to acquire the data necessary for monitoring air quality trends, assessing the efficacy of emission controls, daily risk communication and local health studies. Such an approach to air quality monitoring combines the strengths of these monitoring technologies (i.e., regulatory‐grade stationary monitors, satellite data, low‐cost sensors, and air quality forecast models). We also provide recommendations to data product developers to facilitate and broaden usage of NASA resources by health and AQ stakeholders. Key Points Satellite data and global air quality models can augment data from surface monitors for health and air quality applications These resources provide much needed, cost‐effective air quality information for many Low and Moderate Income Countries With case studies, we show that an effective approach to monitoring combines the strengths of these resources with surface monitors