Explore the vast range of titles available.

Microbially induced calcium carbonate precipitation (MICP) can be mentioned among the popular approaches to develop a self-healing concrete. The production of dissolved inorganic carbon through microbial activity is the main precursor for MICP in concrete and it is limited by the bioavailability of the nutrients. When nutrients are added to the mortar as admixtures, their bioavailability becomes more significant for crack repair because nutrients disperse in the mortar and considerable fraction stays far from a single crack. Therefore, the determination of bioavailability of nutrients and its variation with the initial nutrient content and crack age is essential to optimize a recipe for bacteria-based self-healing concrete. This study presents the optimum nutrient content defined for nitrate-reduction-based self-healing bioconcrete. In the tests, calcium nitrate (CN) and calcium formate (CF) were combined with a CF:CN w/w ratio of 2.50. Mortar properties and bioavailability of nutrients were analysed at different nutrient doses. Moreover, the bioavailability of nutrients at different crack ages changing between 3 and 56 days was monitored. Finally, resuscitation, microbial activity and the MICP performance of nitrate reducing biogranules were tested at defined nutrient bioavailabilties. The optimum nutrient content was determined as 7.00% (CF 5.00% and CN 2.00%). The leaching rates of formate ions were twice the leaching rate of the nitrate ions at similar initial concentrations, which led to a bioavailable HCOO−/NO3-N ratio of 23 g/g in cracked mortar. Under optimum nutrient conditions, the CaCO3 precipitation yield of nitrate reducing biogranules was recorded as 1.5 g CaCO3/g HCOO− which corresponded to 68% C precipitation efficiency.

Application of self-healing concrete reduces the need for expensive maintenance and repair actions. However, the durability of self-healing concrete has only been scarcely investigated. Here, recent results are presented regarding the resistance of self-healing concrete to chloride ingress. For self-healing concrete with macro-encapsulated polyurethane, chloride profiles and electron probe microanalysis indicated that this mechanism was efficient to reduce the chloride penetration into the crack and from the crack into the concrete matrix [1]. Furthermore, the corrosion behaviour of reinforced concrete specimens subjected to cyclic exposure with a NaCl solution was studied [2]. The electrochemical measurements indicated that autonomous crack healing could significantly reduce the corrosion in the propagation stage. No visual damage could be detected on the rebars after 44 weeks of exposure. On the contrary, cracked specimens without integrated self-healing mechanism, reached a state of active corrosion after 10 weeks of exposure and after 26 weeks clear pitting damage was observed on the rebars. While self-healing by encapsulated polyurethane is complete after one day, bacteria-based products take several weeks to heal a 300 µm crack. Bacterial granules containing denitrifying cultures released nitrite as an intermediate metabolic product which protected the reinforcement during the crack healing process [3].

Chemicals and synthetic coatings are widely used to protect steel against corrosion. Bio-based corrosion inhibition strategies can be an alternative in the arising bioeconomy era. To maintain the good state of steel reinforcement in cracked concrete, microbe-based self-healing cementitious composites (MSCC) have been developed. Yet, proposed strategies involve reasonably slow crack filling by biomineralization and thus risk the possible rebar corrosion during crack healing. Here we upgrade the rebar protection to a higher level by combining MSCC with microbial induced corrosion inhibition. Presented NO 3 − reducing bacterial granules inhibit rebar corrosion by producing the anodic corrosion inhibitor NO 2 − and meanwhile heal a 300-µm-wide crack in 28 days. During 120 days exposure to 0.5 M Cl − solution, the rebars in cracked MSCC keep showing open circuit potentials above the critical value of −250 mV and they lose less than 2% of the total rebar material which corresponds to half the material loss in cracked plain mortar. Overall, the obtained rebar protection performance is comparable with that of uncracked mortar and mortar containing chemical inhibitor, hence the microbe-based system becomes an alternative to the traditional methods.

The beneficial effect of microbially induced carbonate precipitation on building materials has been gradually disclosed in the last decade. After the first applications of on historical stones, promising results were obtained with the respect of improved durability. An extensive study then followed on the application of this environmentally friendly and compatible material on a currently widely used construction material, concrete. This review is focused on the discussion of the impact of the two main applications, bacterial surface treatment and bacteria based crack repair, on concrete durability. Special attention was paid to the choice of suitable bacteria and the metabolic pathway aiming at their functionality in concrete environment. Interactions between bacterial cells and cementitious matrix were also elaborated. Furthermore, recommendations to improve the effectiveness of bacterial treatment are provided. Limitations of current studies, updated applications and future application perspectives are shortly outlined.

Recently, cost-efficient nitrate reducing biogranules were suggested as an alternative to axenic microbial cultures for development of microbial self-healing concrete. In a marine environment, biogranule containing microbial self-healing concrete showed simultaneous self-healing of cracks and immunisation against rebar corrosion. Yet, information about the production strategy of these biogranules and their compatibility with a mortar matrix is limited. This study presents the production of biogranules and their compatibility with mortar specimens when incorporated at dosages between 0.36% to 4.30% w/w cement (0.25% to 3% of bacteria w/w cement). In-house produced biogranules composed of 70% bacteria and 30% of minerals w/w of biogranule were used for the compatibility tests. In test mortars, calcium formate (CF) and calcium nitrate (CN) were used as regular nutrient admixtures, and nutrient content was set identical in every batch. Up to 2.9% incorporation, biogranules had no significant influence on the fresh properties of mortar. More than 2.9% incorporation caused poor workability and a 26% decrease in 3-Day compressive strength of biomortar specimens. Overall, the biogranules produced are compatible with a cementitious matrix up to 2.9% w/w cement, and even up to 3.6% if early age strength is not essential, which makes biogranules one of the most compatible microbial healing agents among the suggested agents in the literature.

Microbially induced carbonate precipitation (MICP) has been proposed as a sustainable approach to solve various environmental, structural, geotechnical and architectural issues. In the last decade, a ubiquitous microbial metabolism, nitrate reduction (also known as denitrification) got attention in MICP research due to its unique added benefits such as simultaneous corrosion inhibition in concrete and desaturation of porous media. The latter even upgraded MICP into a more advanced concept called microbially induced desaturation and precipitation (MIDP) which is being investigated for liquefaction mitigation. In this paper, we present the findings on MICP through denitrification by covering applications under two main titles: (i) applications solely based on MICP, such as soil reinforcement, development of microbial self-healing concrete, restoration of artwork and historical monuments, and industrial wastewater treatment, (ii) an application based on MIDP: liquefaction mitigation. After explaining the denitrification process in detail and describing the MICP and MIDP reaction system occurring through denitrification metabolism, the most recent advances in each potential field of application are collected, addressing the novel findings and limitations, to provide insights toward the practical applications in situ. Finally, the research needs required to deal with the defined challenges in application-oriented upscaling and optimization of MICP through denitrification are suggested. Overall, collected research findings revealed that MICP through denitrification possesses a great potential to replace conventionally used petrochemical-based, labour intensive, destructive and economically unfeasible techniques used in construction industry with a bio-based, labourless, low-carbon technology. This worldwide applicable bio-based technology will facilitate the sustainable development and contribute to the carbon-emission-reduction.

The aim of this master thesis study was improvement of the required operational conditions for aerobic granulation in sequencing batch reactors (SBRs).In the first part of the study, membrane bioreactor sludge (MBS) and conventional activated sludge (CAS), were used to investigate the effect of suspended seed sludge type on granulation in SBRs. The MBS granules were found to be advantageous in terms of size, resistance to toxic effects, stability and recovery compared to CAS granules. During non-inhibitory conditions, sCOD removal efficiencies were 70±13% and 67±11% for MBS and CAS, and total nitrogen (TN) removal efficiencies were 38±8% and 26±8%, respectively.In the second part of the study, the effects of period sequence (anoxic-aerobic and aerobic-anoxic) on aerobic granulation from MBS, and sCOD, N removal efficiencies were investigated. Granules developed in anoxic-aerobic period sequence were more stable and larger (1.8-3.5 mm) than granules developed in aerobic-anoxic sequence.Under steady conditions, almost 95% sCOD, 90% Total Ammonia Nitrogen (TAN) and around 39-47 % of TN removal was achieved. Almost 100% denitrification in anoxic period was achieved in anoxic-aerobic period sequence and it was observed around 40% in aerobic-anoxic period sequence. The effects of influent sulfate (from 35.1 mg/L to 70.2 mg/L) on treatment efficiencies of aerobic granules were also investigated. The influent SO42- concentrations of 52.6 mg/L to 70.2 mg/L promoted sulfate reduction. The produced sulfide (0.24 mg/L to 0.62 mg/L) inhibited the ammonia-oxidizing bacteria (AOB) performance by 10 to 50%.