Explore the vast range of titles available.

The loss of water from Mars to space is thought to result from the transport of water to the upper atmosphere, where it is dissociated to hydrogen and escapes the planet. Recent observations have suggested large, rapid seasonal intrusions of water into the upper atmosphere, boosting the hydrogen abundance. We use the Atmospheric Chemistry Suite on the ExoMars Trace Gas Orbiter to characterize the water distribution by altitude. Water profiles during the 2018–2019 southern spring and summer stormy seasons show that high-altitude water is preferentially supplied close to perihelion, and supersaturation occurs even when clouds are present. This implies that the potential for water to escape from Mars is higher than previously thought.

The atmosphere of Mars is enriched in heavy isotopes with respect to Earth as a result of the escape of the atmosphere to space over billions of years. Estimating this enrichment requires a rigorous understanding of all atmospheric processes that contribute to the evolution of isotopic ratios between the lower and upper atmosphere, where escape processes take place. We combine measurements of CO vertical profiles obtained by the Atmospheric Chemistry Suite on board the ExoMars Trace Gas Orbiter with the predictions of a photochemical model and find evidence of a process of photochemistry-induced fractionation that depletes the heavy isotopes of C and O in CO (δ13C = −160 ± 90‰ and δ18O = −20 ± 110‰). In the upper atmosphere, accounting for this process reduces the escape fractionation factor by ~25%, suggesting that less C has escaped from the atmosphere of Mars than previously thought. In the lower atmosphere, incorporation of this 13C-depleted CO fractionation into the surface could support the abiotic origin of recently found Martian organics.Measurements by the ExoMars Trace Gas Orbiter reveal a depletion of heavy CO isotopes in Mars’s atmosphere caused by photochemistry-induced fractionation. The observed depletion in heavy C has implications for our understanding of C escape to space and the formation of organic material on Mars’s surface.

The current Martian atmosphere is about five times more enriched in deuterium than Earth’s, providing direct testimony that Mars hosted vastly more water in its early youth than nowadays. Estimates of the total amount of water lost to space from the current mean D/H value depend on a rigorous appraisal of the relative escape between deuterated and non-deuterated water. Isotopic fractionation of D/H between the lower and the upper atmospheres of Mars has been assumed to be controlled by water condensation and photolysis, although their respective roles in influencing the proportions of atomic D and H populations have remained speculative. Here we report HDO and H 2 O profiles observed by the Atmospheric Chemistry Suite (ExoMars Trace Gas Orbiter) in orbit around Mars that, once combined with expected photolysis rates, reveal the prevalence of the perihelion season for the formation of atomic H and D at altitudes relevant for escape. In addition, while condensation-induced fractionation is the main driver of variations of D/H in water vapour, the differential photolysis of HDO and H 2 O is a more important factor in determining the isotopic composition of the dissociation products. Three years of observations with the ExoMars TGO Atmospheric Chemistry Suite have clarified the mechanism of atmospheric water loss from Mars, and particularly the fraction of deuterium compared with hydrogen. Analysis of several isotopologues of water in the mid-atmosphere of Mars shows that atomic H and D are produced at perihelion in relative amounts controlled by photolysis. These atoms are able to escape from the atmosphere.

The performance of lithium-ion batteries (LIBs) relies on the characteristics of the cathode material, including both intentionally applied coatings and naturally formed surface layers or binder adhesion. This study investigated the influence of the ion-permeable surface fraction, distribution, and characteristics of the coating on the performance of a lithium iron phosphate (LFP) electrode material. We developed an extended Newman-type half-cell model and examined the impact of coating parameters on the galvanostatic discharge curves of the LFP electrode material. The study found that the ion-permeable surface fraction has a significant influence on the diffusion and charge transfer characteristics of the electrode material. A decrease in the ion-permeable surface fraction leads to a decrease in the measured diffusion coefficients and to an increase in the overall coating resistance of the electrode material. Interestingly, the distribution of the ion-permeable surface also plays a role in the diffusion characteristics, with a coarsely dispersed coating resulting in lower diffusion coefficients. Additionally, the coating characteristics significantly affect the polarization and capacity of the electrode material at different C-rates. The model was used to approximate the experimental discharge curves of the LFP-based composite electrodes with two different compositions, and the simulated data showed satisfactory agreement with the experiment. Thus, we believe that the developed model and its further extension will be useful in numerical simulations that aim to facilitate the search for optimal compositions.

A series of mixed copper (II)—zinc oxide catalysts supported on unmodified and ceria-modified silica supports were synthesized using β-cyclodextrin as a template. The novelty of this work lies in the use of cyclosextrins for the template synthesis of catalyst supports. The obtained samples were analyzed by XRD, SEM-EDX, low-temperature nitrogen physisorption, XPS, and EPR. The magnetic properties of the catalysts were also measured. The thermal decomposition of precursors was analyzed by TGA combined with mass-spectrometric analysis of the evolved gases. The effects of the support pore size, the nature of the active phase and its loading, as well as the sequence of component deposition on the catalyst performance in the CO2 conversion to methanol were studied. The catalysts with cerium added at the gelation stage demonstrated the best performance. The selectivity of these samples reaches values of more than 90% over a fairly ide temperature range, with the productivity reaching 480 g/kg cat·h at 300 °C.

The surname of author Cathy Quantin-Nataf was misspelled ‘Quantin-Nata’, authors Ehouarn Millour and Roland Young were missing from the ACS and NOMAD Science Teams list, and minor changes have been made to the author and affiliation lists; see accompanying Amendment. These errors have been corrected online.

The surname of author Cathy Quantin-Nataf was misspelled ‘Quantin-Nata’ , authors Ehouarn Millour and Roland Young were missing from the ACS Science Team list, and minor changes have been made to the author and affiliation lists; see accompanying Amendment. These errors have been corrected online.

The detection of methane on Mars has been interpreted as indicating that geochemical or biotic activities could persist on Mars today. A number of different measurements of methane show evidence of transient, locally elevated methane concentrations and seasonal variations in background methane concentrations. These measurements, however, are difficult to reconcile with our current understanding of the chemistry and physics of the Martian atmosphere, which—given methane’s lifetime of several centuries—predicts an even, well mixed distribution of methane. Here we report highly sensitive measurements of the atmosphere of Mars in an attempt to detect methane, using the ACS and NOMAD instruments onboard the ESA-Roscosmos ExoMars Trace Gas Orbiter from April to August 2018. We did not detect any methane over a range of latitudes in both hemispheres, obtaining an upper limit for methane of about 0.05 parts per billion by volume, which is 10 to 100 times lower than previously reported positive detections. We suggest that reconciliation between the present findings and the background methane concentrations found in the Gale crater would require an unknown process that can rapidly remove or sequester methane from the lower atmosphere before it spreads globally.

Global dust storms on Mars are rare1,2 but can affect the Martian atmosphere for several months. They can cause changes in atmospheric dynamics and inflation of the atmosphere3, primarily owing to solar heating of the dust3. In turn, changes in atmospheric dynamics can affect the distribution of atmospheric water vapour, with potential implications for the atmospheric photochemistry and climate on Mars4. Recent observations of the water vapour abundance in the Martian atmosphere during dust storm conditions revealed a high-altitude increase in atmospheric water vapour that was more pronounced at high northern latitudes5,6, as well as a decrease in the water column at low latitudes7,8. Here we present concurrent, high-resolution measurements of dust, water and semiheavy water (HDO) at the onset of a global dust storm, obtained by the NOMAD and ACS instruments onboard the ExoMars Trace Gas Orbiter. We report the vertical distribution of the HDO/H2O ratio (D/H) from the planetary boundary layer up to an altitude of 80 kilometres. Our findings suggest that before the onset of the dust storm, HDO abundances were reduced to levels below detectability at altitudes above 40 kilometres. This decrease in HDO coincided with the presence of water-ice clouds. During the storm, an increase in the abundance of H2O and HDO was observed at altitudes between 40 and 80 kilometres. We propose that these increased abundances may be the result of warmer temperatures during the dust storm causing stronger atmospheric circulation and preventing ice cloud formation, which may confine water vapour to lower altitudes through gravitational fall and subsequent sublimation of ice crystals3. The observed changes in H2O and HDO abundance occurred within a few days during the development of the dust storm, suggesting a fast impact of dust storms on the Martian atmosphere.

A series of mixed copper (II)—zinc oxide catalysts supported on unmodified and ceria-modified silica supports were synthesized using β-cyclodextrin as a template. The novelty of this work lies in the use of cyclosextrins for the template synthesis of catalyst supports. The obtained samples were analyzed by XRD, SEM-EDX, low-temperature nitrogen physisorption, XPS, and EPR. The magnetic properties of the catalysts were also measured. The thermal decomposition of precursors was analyzed by TGA combined with mass-spectrometric analysis of the evolved gases. The effects of the support pore size, the nature of the active phase and its loading, as well as the sequence of component deposition on the catalyst performance in the CO[sub.2] conversion to methanol were studied. The catalysts with cerium added at the gelation stage demonstrated the best performance. The selectivity of these samples reaches values of more than 90% over a fairly ide temperature range, with the productivity reaching 480 g/kg cat·h at 300 °C.