Explore the vast range of titles available.

Many municipal facilities, such as pools and drinking water treatment facilities, are subject to ongoing maintenance due to the corrosion of their metallic materials caused by chlorine, leading to high costs and a possible risk to public health. A proper study of the employed product’s effect could lead to the use of better materials, which significantly increase the lifetime of metallic equipment more attacked by corrosion, through studies evaluating their cost-effectiveness. This paper was carried out with the objective of studying the degradation of some metallic materials (AISI 316L, AISI 321 and Duplex 14462) used in the referred facilities in order to select the one that possessed a better behavior. It was observed that the introduction of some more adequate materials can drastically reduce maintenance operations, with Duplex 14462 showing the best results, ideal for greater chlorine concentrations, followed by AISI 321, which may be employed for components in less contact with chlorine, since it is more easily affordable.

Due to chlorine’s ability to kill bacteria and fungi through a chemical reaction, chlorine solutions are commonly used to clean and disinfect numerous public facilities, although these actions are also dependent to the equipment present in those facilities. Accordingly, the interest in studying its effect when in contact with different materials is obvious. This study was carried out through accelerated degradation tests and various analysis methods (optical microscope, scanning electron microscope, and tensile tests). The objective was to observe the wear presented by three polymeric materials, polyvinyl chloride (PVC), high-density polyethylene (HDPE), and polypropylene (PP), when exposed to chlorine’s action in swimming pools and drinking water treatment plants. The resulting effect depends on the chlorine content and the type of contact between the chemical agent and the material. The aim was to select the material less likely to be affected by chlorine through tests and analyses, allowing a longer component life. The use of certain more resistant polymeric materials can drastically reduce maintenance, reducing fundamental factors such as costs, the downtime of municipal facilities, and also the risk to public health. It was concluded that PVC has the most stable behaviour overall when in contact with chlorine solutions.

The use of disinfection and cleaning chemicals in several municipal facilities, such as swimming pools and drinking water treatment plants, causes the degradation of various types of wood, which leads to failures in equipment and the corresponding need for maintenance. This degradation creates added costs for municipalities, as well as the closure of certain facilities due to curative or preventive maintenance and, in many cases, public health issues, due to the water being contaminated with deteriorating products. Through a thorough study of the degradation effect on the products, more resistant materials can be found which are able to withstand these adversities and increase the lifespan of wood in regular contact with chemical agents. This is achievable by the determination of the cost-effectiveness of the substitute material to replace these components with alternative ones, with properties that better resist the deterioration effects promoted by aggressive environments. No studies have been found so far strictly focused on this matter. The objective of this study is to evaluate the degradation presented by two types of wood, beech and oak, which are exposed to the action of chlorine in municipal facilities. This degradation varies according to the chlorine content and the materials’ time of contact with the chemical agent, allowing the selection of new materials which will provide an extended lifetime of the components, reducing maintenance drastically, as well as costs for the facilities and the risk to public health. The performed experimental tests have shown that the oak wood has the best results regarding chlorine degradation resistance.

This study aimed to evaluate the effects of fertigation with humic substances, with and without the addition of plant extracts, on the root system of the 'BRS Princesa' banana cultivar. The banana crop was cultivated at a spacing of 2.0 x 2.5 m and fertigated using a drip system in a dystrocohesive Yellow Latosol. The experimental design was randomized blocks, in a split-split-plot scheme with five replicates, for the following factors: humic substance doses and presence of a plant extract formulation. The treatments consisted of five doses of humic substances, based on a reference dose of 14.14 L ha-1 cycle-1, in the presence and absence of plant extract. The variable root length (cm) was subjected to variance analyses to evaluate the effect of the humic substances, either isolated or in interaction with plant extract and soil depth. The use of the plant extract increased the effect of the humic substance on root length but overshadowed its effect for the different doses of humic substance. Root length was not sensitive to increasing humic substance dose with plant extract for doses of up to 42.42 L ha-1at 0 - 0.40 m depth.

This study aimed to evaluate the effects of fertigation with humic substances, with and without the addition of plant extracts, on the root system of the 'BRS Princesa' banana cultivar. The banana crop was cultivated at a spacing of 2.0 x 2.5 m and fertigated using a drip system in a dystrocohesive Yellow Latosol. The experimental design was randomized blocks, in a split-split-plot scheme with five replicates, for the following factors: humic substance doses and presence of a plant extract formulation. The treatments consisted of five doses of humic substances, based on a reference dose of 14.14 L ha-1 cycle-1, in the presence and absence of plant extract. The variable root length (cm) was subjected to variance analyses to evaluate the effect of the humic substances, either isolated or in interaction with plant extract and soil depth. The use of the plant extract increased the effect of the humic substance on root length but overshadowed its effect for the different doses of humic substance. Root length was not sensitive to increasing humic substance dose with plant extract for doses of up to 42.42 L ha-1at 0 - 0.40 m depth.

The impact of nanotechnology on the exponential growth of several research areas, particularly nanomedicine, is undeniable. The ability to deliver active molecules to the desired site could significantly improve the efficiency of medical treatments. One of the nanocarriers developed which has drawn researchers’ attention are cubosomes, which are nanosized dispersions of lipid bicontinuous cubic phases in water, consisting of a lipidic interior and aqueous domains folded in a cubic lattice. They stand out due to their ability to incorporate hydrophobic, hydrophilic, and amphiphilic compounds, their tortuous internal configuration that provides a sustained release, and the capacity to protect and safely deliver molecules. Several approaches can be taken to prepare this structure, as well as different lipids like monoolein or phytantriol. This review paper describes the different methods to prepare nanocarriers. As it is known, the physicochemical properties of nanocarriers are very important, as they influence their pharmacokinetics and their ability to incorporate and deliver active molecules. Therefore, an extensive characterization is essential to obtain the desired effect. As a result, we have extensively described the most common techniques to characterize cubosomes, particularly nanocarriers. The exceptional properties of the cubosomes make them suitable to be used in several applications in the biomedical field, from cancer therapeutics to imaging, which will be described. Taking in consideration the outstanding properties of cubosomes, their application in several research fields is envisaged.

Exercise training is a well-known coadjuvant in heart failure treatment; however, the molecular mechanisms underlying its beneficial effects remain elusive. Despite the primary cause, heart failure is often preceded by two distinct phenomena: mitochondria dysfunction and cytosolic protein quality control disruption. The objective of the study was to determine the contribution of exercise training in regulating cardiac mitochondria metabolism and cytosolic protein quality control in a post-myocardial infarction-induced heart failure (MI-HF) animal model. Our data demonstrated that isolated cardiac mitochondria from MI-HF rats displayed decreased oxygen consumption, reduced maximum calcium uptake and elevated H₂O₂ release. These changes were accompanied by exacerbated cardiac oxidative stress and proteasomal insufficiency. Declined proteasomal activity contributes to cardiac protein quality control disruption in our MI-HF model. Using cultured neonatal cardiomyocytes, we showed that either antimycin A or H₂O₂ resulted in inactivation of proteasomal peptidase activity, accumulation of oxidized proteins and cell death, recapitulating our in vivo model. Of interest, eight weeks of exercise training improved cardiac function, peak oxygen uptake and exercise tolerance in MI-HF rats. Moreover, exercise training restored mitochondrial oxygen consumption, increased Ca²⁺-induced permeability transition and reduced H₂O₂ release in MI-HF rats. These changes were followed by reduced oxidative stress and better cardiac protein quality control. Taken together, our findings uncover the potential contribution of mitochondrial dysfunction and cytosolic protein quality control disruption to heart failure and highlight the positive effects of exercise training in re-establishing cardiac mitochondrial physiology and protein quality control, reinforcing the importance of this intervention as a non-pharmacological tool for heart failure therapy.

To identify the most effective premedication strategies for improving mask acceptance, parental separation acceptance, and intravenous cannulation acceptance in pediatric patients undergoing general anesthesia. A systematic review and Bayesian network meta-analysis of randomized controlled trials. Elective pediatric surgeries under general anesthesia. Children aged 1–12 years, classified as American Society of Anesthesiologists (ASA) I–III, who received premedication with midazolam, dexmedetomidine, ketamine, or other relevant agents and combinations. Two main analyses were conducted using a Bayesian framework to generate comparative efficacy rankings. A primary analysis considered every unique combination of drug, dose, route, and timing as a distinct intervention. A secondary analysis grouped interventions solely by the pharmacological agent(s) used, regardless of dose, route, or timing. This dual approach allowed specific comparisons of route and dose while also providing a broader assessment of each drug or combination. Outcomes were satisfactory acceptance of mask application, parental separation, and intravenous cannulation. Meta-regression, sensitivity analyses, and assessment of risk of bias were also undertaken. Sixty-nine trials encompassing 5794 pediatric patients were included. In the primary analysis, only mask acceptance could be evaluated. Combinations of dexmedetomidine, midazolam, and ketamine demonstrated the highest probabilities of satisfactory mask acceptance, with intranasal administration at shorter premedication intervals (15–30 min) showing greater efficacy. Clonidine, melatonin, and diazepam were comparatively less effective. In the secondary analysis, mask acceptance, intravenous cannulation acceptance, and parental separation acceptance yielded similar findings, with pharmacological combinations based on dexmedetomidine and midazolam ranking highest, while clonidine, melatonin, and diazepam remained less effective. Dexmedetomidine-, midazolam-, and ketamine-based combinations offer superior preoperative cooperation in pediatric patients, as demonstrated by higher success rates of mask acceptance, intravenous cannulation acceptance, and parental separation acceptance. Routes, doses, and timing are critical factors influencing success. •Combining premedications outperformed single-agent approaches across all outcomes.•Dexmedetomidine, midazolam, and ketamine were effective single-agent approaches.•Intranasal and oral premedication regimens showed consistently good outcomes.•Shorter premedication times (eg. 15–30 min) outperformed longer premedication times.•Clonidine and melatonin were the least effective agents across all outcomes.

Clustered regularly interspaced short palindromic repeats (CRISPR) and CRISPR-associated nuclease 9 (Cas9) gene-editing offers exciting new therapeutic possibilities for disease treatment with a genetic etiology such as cancer, cardiovascular, neuronal, and immune disorders. However, its clinical translation is being hampered by the lack of safe, versatile, and effective nonviral delivery systems. Herein we report on the preparation and application of two cationic liposome–DNA systems (i.e., lipoplexes) for CRISPR/Cas9 gene delivery. For that purpose, two types of cationic lipids are used (DOTAP, monovalent, and MVL5, multivalent with +5e nominal charge), along with three types of helper lipids (DOPC, DOPE, and monoolein (GMO)). We demonstrated that plasmids encoding Cas9 and single-guide RNA (sgRNA), which are typically hard to transfect due to their large size (>9 kb), can be successfully transfected into HEK 293T cells via MVL5-based lipoplexes. In contrast, DOTAP-based lipoplexes resulted in very low transfection rates. MVL5-based lipoplexes presented the ability to escape from lysosomes, which may explain the superior transfection efficiency. Regarding gene editing, MVL5-based lipoplexes achieved promising GFP knockout levels, reaching rates of knockout superior to 35% for charge ratios (+/−) of 10. Despite the knockout efficiency being comparable to that of Lipofectamine 3000® commercial reagent, the non-specific gene knockout is more pronounced in MVL5-based formulations, probably resulting from the considerable cytotoxicity of these formulations. Altogether, these results show that multivalent lipid-based lipoplexes are promising CRISPR/Cas9 plasmid delivery vehicles, which by further optimization and functionalization may become suitable in vivo delivery systems.

Given the widespread use of glyphosate (GLY), this agrochemical is becoming a source of contamination in agricultural soils, affecting non-target plants. Therefore, sustainable strategies to increase crop tolerance to GLY are needed. From this perspective and recalling silicon (Si)’s role in alleviating different abiotic stresses, the main goal of this study was to assess if the foliar application of Si, either as bulk or nano forms, is capable of enhancing Solanum lycopersicum L. tolerance to GLY (10 mg kg−1). After 28 day(s), GLY-treated plants exhibited growth-related disorders in both shoots and roots, accompanied by an overproduction of superoxide anion (O2•−) and malondialdehyde (MDA) in shoots. Although plants solely exposed to GLY have activated non-enzymatic antioxidant mechanisms (proline, ascorbate and glutathione), a generalized inhibition of the antioxidant enzymes was found, suggesting the occurrence of great redox disturbances. In response to Si or nano-SiO2 co-application, most of GLY phytotoxic effects on growth were prevented, accompanied with a better ROS removal, especially by an upregulation of the main antioxidant enzymes, including superoxide dismutase (SOD), catalase (CAT) and ascorbate peroxidase (APX). Overall, results pointed towards the potential of both sources of Si to reduce GLY-induced oxidative stress, without major differences between their efficacy.