Explore the vast range of titles available.

Magnetic skyrmions are small swirling topological defects in the magnetization texture. Their stabilization and dynamics depend strongly on their topological properties. In most cases, they are induced by chiral interactions between atomic spins in non-centrosymmetric magnetic compounds or in thin films with broken inversion symmetry. Skyrmions can be extremely small, with diameters in the nanometre range, and behave as particles that can be moved, created and annihilated, which makes them suitable for ‘abacus’-type applications in information storage and logic technologies. Until recently, skyrmions had been observed only at low temperature and, in most cases, under large applied magnetic fields. An intense research effort has led to the identification of thin-film and multilayer structures in which skyrmions are now stable at room temperature and can be manipulated by electrical currents. The development of skyrmion-based topological spintronics holds promise for applications in the mid-term furure, even though many challenges, such as the achievement of writing, processing and reading functionalities at room temperature and in all-electrical manipulation schemes, still lie ahead. Magnetic skyrmions are topologically protected spin whirls that hold promise for applications because they can be controllably moved, created and annihilated. In this Review, the underlying physics of the stabilization of skyrmions at room temperature and their prospective use for spintronic applications are discussed.

Using first-principles calculations, we demonstrate several approaches to control Dzyaloshinskii-Moriya Interaction (DMI) in ultrathin films with perpendicular magnetic anisotropy. First, we find that DMI is significantly enhanced when the ferromagnetic (FM) layer is sandwiched between nonmagnetic (NM) layers inducing additive DMI in NM1/FM/NM2 structures. For instance, when two NM layers are chosen to induce DMI of opposite chirality in Co, e.g. NM1 representing Au, Ir, Al or Pb, and NM2 being Pt, the resulting DMI in NM1/Co/Pt trilayers is enhanced compared to Co/Pt bilayers. Moreover, DMI can be significantly enhanced further in case of using FM layer comprising Fe and Co layers. Namely, it is found that the DMI in Ir/Fe/Co/Pt structure can be enhanced by 80% compared to that of Co/Pt bilayers reaching a very large DMI amplitude of 5.59 meV/atom. Our second approach for enhancing DMI is to use oxide capping layer. We show that DMI is enhanced by 60% in Oxide/Co/Pt structures compared to Co/Pt bilayers. Moreover, we unveiled the DMI mechanism at Oxide/Co interface due to Rashba effect, which is different to Fert-Levy DMI at FM/NM interfaces. Finally, we demonstrate that DMI amplitude can be modulated using an electric field with an efficiency factor comparable to that of the electric field control of perpendicular magnetic anisotropy in transition metal/oxide interfaces. These approaches of DMI controlling pave the way for skyrmion and domain wall motion-based spintronic applications.

Current-induced spin-orbit torques (SOTs) are of interest for fast and energy-efficient manipulation of magnetic order in spintronic devices. To be deterministic, however, switching of perpendicularly magnetized materials by SOT requires a mechanism for in-plane symmetry breaking. Existing methods to do so involve the application of an in-plane bias magnetic field, or incorporation of in-plane structural asymmetry in the device, both of which can be difficult to implement in practical applications. Here, we report bias-field-free SOT switching in a single perpendicular CoTb layer with an engineered vertical composition gradient. The vertical structural inversion asymmetry induces strong intrinsic SOTs and a gradient-driven Dzyaloshinskii–Moriya interaction (g-DMI), which breaks the in-plane symmetry during the switching process. Micromagnetic simulations are in agreement with experimental results, and elucidate the role of g-DMI in the deterministic switching processes. This bias-field-free switching scheme for perpendicular ferrimagnets with g-DMI provides a strategy for efficient and compact SOT device design. Switching of ferrimagnets by current-induced spin-orbit torque is promising for spintronics, due to their high-speed dynamics and small macroscopic magnetization. Switching of perpendicularly magnetized materials, however, requires a bias field for symmetry breaking. Here, Zheng et al demonstrate field-free current-induced switching of perpendicular ferrimagnets, using a compositional gradient-driven Dzyaloshinskii–Moriya interaction.

Room-temperature skyrmions in ferromagnetic films and multilayers show promise for encoding information bits in new computing technologies. Despite recent progress, ferromagnetic order generates dipolar fields that prevent ultrasmall skyrmion sizes, and allows a transverse deflection of moving skyrmions that hinders their efficient manipulation. Antiferromagnetic skyrmions shall lift these limitations. Here we demonstrate that room-temperature antiferromagnetic skyrmions can be stabilized in synthetic antiferromagnets (SAFs), in which perpendicular magnetic anisotropy, antiferromagnetic coupling and chiral order can be adjusted concurrently. Utilizing interlayer electronic coupling to an adjacent bias layer, we demonstrate that spin-spiral states obtained in a SAF with vanishing perpendicular magnetic anisotropy can be turned into isolated antiferromagnetic skyrmions. We also provide model-based estimates of skyrmion size and stability, showing that room-temperature antiferromagnetic skyrmions below 10 nm in radius can be anticipated in further optimized SAFs. Antiferromagnetic skyrmions in SAFs may thus solve major issues associated with ferromagnetic skyrmions for low-power spintronic devices. Antiferromagnetic skyrmions—which have distinct advantages over skyrmions found in other magnetic systems—are observed at room temperature in synthetic antiferromagnets. These results hold promise for low-power spintronic devices.

Magnetic skyrmions are topologically protected whirling spin textures that can be stabilized in magnetic materials by an asymmetric exchange interaction between neighbouring spins that imposes a fixed chirality. Their small size, together with the robustness against external perturbations, make magnetic skyrmions potential storage bits in a novel generation of memory and logic devices. To this aim, their contribution to the electrical transport properties of a device must be characterized—however, the existing demonstrations are limited to low temperatures and mainly in magnetic materials with a B20 crystal structure. Here we combine concomitant magnetic force microscopy and Hall resistivity measurements to demonstrate the electrical detection of sub-100 nm skyrmions in a multilayered thin film at room temperature. Furthermore, we detect and analyse the Hall signal of a single skyrmion, which indicates that it arises from the anomalous Hall effect with a negligible contribution from the topological Hall effect.

Orbitronics is based on the use of orbital currents as information carriers. Orbital currents can be generated from the conversion of charge or spin currents, and inversely, they could be converted back to charge or spin currents. Here we demonstrate that orbital currents can also be generated by femtosecond light pulses on Ni. In multilayers associating Ni with oxides and nonmagnetic metals such as Cu, we detect the orbital currents by their conversion into charge currents and the resulting terahertz emission. We show that the orbital currents extraordinarily predominate the light-induced spin currents in Ni-based systems, whereas only spin currents can be detected with CoFeB-based systems. In addition, the analysis of the time delays of the terahertz pulses leads to relevant information on the velocity and propagation length of orbital carriers. Our finding of light-induced orbital currents and our observation of their conversion into charge currents opens new avenues in orbitronics, including the development of orbitronic terahertz devices. Several recent works have highlighted the importance of the orbital currents in transferring angular momentum within materials. In combination with spin-orbit coupling, such orbital currents can be used to alter the magnetization of a material. Herein, the authors demonstrate the inverse effect, showing orbital current driven terahertz emission in Nickel based heterostructures.

Perpendicular magnetic tunnel junctions based on MgO/CoFeB structures are of particular interest for magnetic random-access memories because of their excellent thermal stability, scaling potential, and power dissipation. However, the major challenge of current-induced switching in the nanopillars with both a large tunnel magnetoresistance ratio and a low junction resistance is still to be met. Here, we report spin transfer torque switching in nano-scale perpendicular magnetic tunnel junctions with a magnetoresistance ratio up to 249% and a resistance area product as low as 7.0 Ω µm 2 , which consists of atom-thick W layers and double MgO/CoFeB interfaces. The efficient resonant tunnelling transmission induced by the atom-thick W layers could contribute to the larger magnetoresistance ratio than conventional structures with Ta layers, in addition to the robustness of W layers against high-temperature diffusion during annealing. The critical switching current density could be lower than 3.0 MA cm −2 for devices with a 45-nm radius. Perpendicular magnetic tunnel junctions with large tunnel magnetoresistance and low junction resistance are promising for the magnetic random access memories. Here the authors achieve the spin-transfer-torque switching in perpendicular magnetic tunnel junctions with 249% tunnel magnetoresistance and low resistance-area product.

Two-dimensional (2D) ferromagnetic materials with unique magnetic properties have great potential for next-generation spintronic devices with high flexibility, easy controllability, and high heretointegrability. However, realizing magnetic switching with low power consumption at room temperature is challenging. Here, we demonstrate the room-temperature spin-orbit torque (SOT) driven magnetization switching in an all-van der Waals (vdW) heterostructure using an optimized epitaxial growth approach. The topological insulator Bi 2 Te 3 not only raises the Curie temperature of Fe 3 GeTe 2 (FGT) through interfacial exchange coupling but also works as a spin current source allowing the FGT to switch at a low current density of ~2.2×10 6 A/cm 2 . The SOT efficiency is ~2.69, measured at room temperature. The temperature and thickness-dependent SOT efficiency prove that the larger SOT in our system mainly originates from the nontrivial topological origin of the heterostructure. Our experiments enable an all-vdW SOT structure and provides a solid foundation for the implementation of room-temperature all-vdW spintronic devices in the future. Magnetic random access memory (MRAM) exhibits remarkable device endurance, while also offering potential operation speed and energy efficiency improvements compared to conventional random access memory. However, challenges remain, both in terms of efficiency, and miniaturization. Here, Wang et al demonstrate a van der Waals (vdW) based spin-orbit torque switching, in a Fe 3 GeTe 2 /Bi2Te 3 heterostructure, paving the way for thinner and higher efficiency spin-orbit torque based vdW MRAM.

Three-dimensional spin textures emerge as promising quasi-particles for encoding information in future spintronic devices. The third dimension provides more malleability regarding their properties and more flexibility for potential applications. However, the stabilization and characterization of such quasi-particles in easily implementable systems remain a work in progress. Here we observe a three-dimensional magnetic texture that sits in the interior of magnetic thin films aperiodic multilayers and possesses a characteristic ellipsoidal shape. Interestingly, these objects that we call skyrmionic cocoons can coexist with more standard tubular skyrmions going through all the multilayer as evidenced by the existence of two very different contrasts in room temperature magnetic force microscopy. The presence of these novel skyrmionic textures as well as the understanding of their layer resolved chiral and topological properties have been investigated by micromagnetic simulations. Finally, we show that the skyrmionic cocoons can be electrically detected using magneto-transport measurements. Three dimensional topological spin textures, such as hopfions and skyrmion tubes, have seen a surge of interest for their potential technological applications. They offer greater flexibility than their two dimensional counterparts, but have been hampered by the limited material platforms. Here, Grelier et al. look at aperiodic multilayers, and observe a three dimensional skyrmionic cocoon.

We report on spin transport in state-of-the-art epitaxial monolayer graphene based 2D-magnetic tunnel junctions (2D-MTJs). In our measurements, supported by ab-initio calculations, the strength of interaction between ferromagnetic electrodes and graphene monolayers is shown to fundamentally control the resulting spin signal. In particular, by switching the graphene/ferromagnet interaction, spin transport reveals magneto-resistance signal MR > 80% in junctions with low resistance × area products. Descriptions based only on a simple K-point filtering picture (i.e. MR increase with the number of layers) are not sufficient to predict the behavior of our devices. We emphasize that hybridization effects need to be taken into account to fully grasp the spin properties (such as spin dependent density of states) when 2D materials are used as ultimately thin interfaces. While this is only a first demonstration, we thus introduce the fruitful potential of spin manipulation by proximity effect at the hybridized 2D material / ferromagnet interface for 2D-MTJs. 2D materials are foreseen as an opportunity to tailor spintronics devices interfaces, a.k.a spinterfaces. Here, using state-of-the-art large-scale integration in spin-valves, authors demonstrate that hybridization of graphene with a metallic spin source results in strong spin filtering effects.