Explore the vast range of titles available.

Dragon fruit (Hylocereus genus) has the potential for the prevention of diseases associated with inflammatory and oxidative processes. We aimed to comprehensively review dragon fruit health effects, economic importance, and possible use in delivery systems. Pubmed, Embase, and Google Scholar were searched, and PRISMA (Preferred Reporting Items for a Systematic Review and Meta-Analysis) guidelines were followed. Studies have shown that pitaya can exert several benefits in conditions such as diabetes, dyslipidemia, metabolic syndrome, cardiovascular diseases, and cancer due to the presence of bioactive compounds that may include vitamins, potassium, betacyanin, p-coumaric acid, vanillic acid, and gallic acid. Moreover, pitaya has the potential to be used in food and nutraceutical products as functional ingredients, natural colorants, ecologically correct and active packaging, edible films, preparation of photoprotective products, and additives. Besides the importance of dragon fruit as a source of bioactive compounds, the bioavailability is low. The development of delivery systems such as gold nanoparticles with these compounds can be an alternative to reach target tissues.

Metabolic-Associated Fatty Liver Disease (MAFLD) is a clinical–pathological scenario that occurs due to the accumulation of triglycerides in hepatocytes which is considered a significant cause of liver conditions and contributes to an increased risk of death worldwide. Even though the possible causes of MAFLD can involve the interaction of genetics, hormones, and nutrition, lifestyle (diet and sedentary lifestyle) is the most influential factor in developing this condition. Polyphenols comprise many natural chemical compounds that can be helpful in managing metabolic diseases. Therefore, the aim of this review was to investigate the impact of oxidative stress, inflammation, mitochondrial dysfunction, and the role of polyphenols in managing MAFLD. Some polyphenols can reverse part of the liver damage related to inflammation, oxidative stress, or mitochondrial dysfunction, and among them are anthocyanin, baicalin, catechin, curcumin, chlorogenic acid, didymin, epigallocatechin-3-gallate, luteolin, mangiferin, puerarin, punicalagin, resveratrol, and silymarin. These compounds have actions in reducing plasma liver enzymes, body mass index, waist circumference, adipose visceral indices, lipids, glycated hemoglobin, insulin resistance, and the HOMA index. They also reduce nuclear factor-KB (NF-KB), interleukin (IL)-1β, IL-6, tumor necrosis factor-α (TNF-α), blood pressure, liver fat content, steatosis index, and fibrosis. On the other hand, they can improve HDL-c, adiponectin levels, and fibrogenesis markers. These results show that polyphenols are promising in the prevention and treatment of MAFLD.

Smallanthus sonchifolius, popularly known as yacon, is a member of the Asteraceae family. Due to its medicinal and edible value, yacon is consumed by different populations. Yacon is unique due to its high fructo-oligosaccharide and inulin content, as well as flavonoids, sesquiterpene lactones, and phenolic acids. Roots can be used to produce flour, which is less perishable and can be applied in various industrial products. This systematic review focuses on the effects of yacon flour on metabolic parameters. PubMed, Cochrane, Embase, Science Direct, Scopus, Web of Science, and Google Scholar databases were consulted, and PRISMA guidelines were followed in the selection of the studies. In total, 526 articles were found in the databases, and of these, only 28 full texts were eligible for inclusion. After applying the inclusion and exclusion criteria, seven studies were finally included. The results showed that the use of yacon flour can reduce glycemia, HbA1c, advanced glycation ends, plasma lipids, body fat mass, body weight, and waist circumference and improve intestinal microbiota and the antioxidant status. Further exploration of the effects of yacon flour is warranted, and additional clinical trials are necessary to determine the optimal daily consumption levels required to assist in improving metabolic parameters.

The ATHENA observatory is the second large class ESA mission to be launched on 2031 at L2 orbit. One of the two onboard instruments is X-IFU, a TES-based kilo-pixel array able to perform simultaneous high-grade energy spectroscopy (FWHM 2.5 eV@7 keV) and imaging over the 5′ field of view. The X-IFU sensitivity is degraded by primary particle background of both solar and galactic cosmic ray (GCR) origins, and by secondary electrons produced by primaries, interacting with the materials surrounding the detector: These particles cannot be distinguished by the scientific photons, thus degrading the instrument performance. Results from studies regarding the GCR component performed by Geant4 simulations address the necessity to use background reduction techniques to enable the study of several key science topics. This is feasible by combining an active Cryogenic AntiCoincidence detector (CryoAC) and a passive electron shielding to reach the required residual particle background of 0.005 cts/cm 2 /s/keV inside the 2–10 keV scientific energy band. The CryoAC is a four-pixel detector made of Si-suspended absorbers sensed by a network of IrAu TESes and placed at a distance < 1 mm below the TES array. Here we will provide an overview of the CryoAC program, starting with some details on the background assessment having impacts on the CryoAC design; then, we continue with its design concept including electronics and the Demonstration Model results, to conclude with programmatic aspects.

We report the detection by the Astrorivelatore Gamma a Immagini Leggero (AGILE) satellite of terrestrial gamma ray flashes (TGFs) obtained with the minicalorimeter (MCAL) detector operating in the energy range 0.3–100 MeV. We select events typically lasting a few milliseconds with spectral and directional selections consistent with the TGF characteristics previously reported by other space missions. During the period 1 June 2008 to 31 March 2009 we detect 34 high‐confidence events showing millisecond durations and a geographical distribution peaked over continental Africa and Southeast Asia. For the first time, AGILE‐MCAL detects photons associated with TGF events up to 40 MeV. We determine the cumulative spectral properties of the spectrum in the range 0.5–40 MeV, which can be effectively described by a Bremsstrahlung spectrum. We find that both the TGF cumulative spectral properties and their geographical distribution are in good agreement with the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) results.

The development of a single-photon detector based on a vacuum tube, transmission photocathode, microchannel plate and CMOS pixelated read-out anode is presented. This imager will be capable of detecting up to 1 billion photons per second over an area of 7 cm 2 , with simultaneous measurement of position and time with resolutions of about 5 microns and few tens of picosecond, respectively. The detector has embedded pulse-processing electronics with data-driven architecture, based on the Timepix4 ASIC, producing up to 160 Gb/s data that will be handled by a high-throughput FPGA-based external electronics and data acquisition system. These performances will enable significant advances in particle physics, life sciences, quantum optics or other emerging fields where the detection of single photons with excellent timing and position resolutions are simultaneously required.

The present article concerns the preparation of poly(methyl methacrylate)/titania nanocomposites by a non-conventional bottom-up approach, as alternative to the conventional mechanical compounding of preformed filler particles. Poly(methyl methacrylate) (PMMA) was modified with in situ generation of titania nanoparticles by means of the so-called non-hydrolytic sol–gel (NHSG) process in the presence of tert -butyl alcohol ( t BuOH) as oxygen donor and polymer solvent. The results showed that the synthetic procedure used permitted the preparation of the highly filled PMMA (up to 20 phr of titania in anatase form) with titania actual content values very close to the nominal ones and with enhanced filler dispersion and homogeneous distribution within the polymeric matrix, avoiding the typical rheological problems related to distributive and dispersive mixing of conventional compounding methods. The presence of titania nanoparticles led to increases in glass transition temperature and E ′ modulus in the rubbery region for all the prepared samples with respect to the pristine PMMA. Finally, the nanocomposites showed an interesting photo-catalytic activity towards organic molecules. The findings led us to conclude that the NHSG process was successfully employed to produce anatase titania in the presence of t BuOH and PMMA. The proposed process seems to offer a very promising method to produce polymer nanocomposites with good filler dispersion and homogeneous distribution and with interesting functional properties such as photo-catalytic activity.

HERMES-Pathfinder is a space-borne mission based on a constellation of six nano-satellites flying in a low-Earth orbit. The 3U CubeSats, to be launched in early 2025, host miniaturized instruments with a hybrid Silicon Drift Detector/scintillator photodetector system, sensitive to both X-rays and gamma-rays. A seventh payload unit is installed onboard SpIRIT, an Australian-Italian nano-satellite developed by a consortium led by the University of Melbourne and launched in December 2023. The project aims at demonstrating the feasibility of Gamma-Ray Burst detection and localization using miniaturized instruments onboard nano-satellites. The HERMES flight model payloads were exposed to multiple well-known radioactive sources for spectroscopic calibration under controlled laboratory conditions. The analysis of the calibration data allows both to determine the detector parameters, necessary to map instrumental units to accurate energy measurements, and to assess the performance of the instruments. We report on these efforts and quantify features such as spectroscopic resolution and energy thresholds, at different temperatures and for all payloads of the constellation. Finally we review the performance of the HERMES payload as a photon counter, and discuss the strengths and the limitations of the architecture.

Serious cartilage lesions (Outerbridge III, IV) may be successfully treated with a three-layered gradient scaffold made by magnesium-doped hydroxyapatite and type I collagen, manufactured through a bio-inspired process and stabilised by a reactive bis-epoxy (1,4-butanediol diglycidyl ether, BDDGE). Each layer was analysed to elucidate the effects of crosslinking variables (concentration, temperature and pH). The chemical stabilisation led to an homogeneous and aligned collagenous matrix: the fibrous structures switched to a laminar foils-based arrangement and organic phases acquired an highly coordinated 3D-organization. These morphological features were strongly evident when crosslinking occurred in alkaline solution, with BDDGE concentration of at least 1 wt%. The optimised crosslinking conditions did not affect the apatite nano-crystals nucleated into self-assembling collagen fibres. The present work allowed to demonstrate that acting on BDDGE reaction parameters might be an useful tool to control the chemical–physical properties of bio-inspired scaffold suitable to heal wide osteochondral defects, even through arthroscopic procedure.

Despite several efforts to find suitable alternatives to autologous bone, no bone substitute currently available provides the same characteristics and properties. Nevertheless, among the wide range of materials proposed as bone substitutes, calcium phosphate materials represent the most promising category and the present study is aimed at improving the knowledge on non-stoichiometric magnesium-doped hydroxyapatite substitutes (Mg-HA), tested in two different formulations: Mg-HA Putty and Mg-HA Granules. These bone substitutes were implanted bilaterally into iliac crest bone defects in healthy sheep and comparative histological, histomorphometric, microhardness and ultrastructural assessments were performed 9, 12, 18 and 24 months after surgery to elucidate bone tissue apposition, mineralization and material degradation in vivo. The results confirmed that the biomimetic bone substitutes provide a histocompatible and osteoconductive structural support, during the bone formation process, and give essential information about the in vivo resorption process and biological behavior of biomimetic bone substitutes.