Explore the vast range of titles available.

In recent years, the demand for filter media has increased dramatically, driven by the need to manufacture personal protective equipment and for various applications in the industrial and civil sectors. Nanofiber‐based membranes are proposed as potential alternatives to commercial filtration devices. This study presents the design and implementation of an innovative pre‐industrial electrospinning setup, combining a negatively charged spinneret and a positively charged counter‐electrode, capable of producing polyvinylidene fluoride (PVDF) nanofibers with an average diameter of 410 nm and electrostatic surface potential values 3.7 times higher compared to a conventional electrospinning process, eliminating the need for further post‐treatment. These properties are essential for improving mechanical and electrostatic filtration of small particles, including infectious droplets. The surface potential of the membranes is also long‐lasting, as evidenced by tests one year after manufacture. As a case‐study, these filters are used to manufacture surgical masks, reporting excellent performance in terms of bacterial filtration efficiency (BFE) up to 99.9%, and breathability (29.8±4.5 Pa cm−2) when compared to commercially available meltblown polypropylene (PP) face masks, and also complied with the stringent European standard (EN14683:2019) for type‐II surgical masks. Furthermore, the pre‐industrial setup allows for increased production capacity of up to 42 000 m2 per year, suitable for large‐scale production. Herein, an innovative custom‐made pre‐industrial electrospinning setup is designed to produce filters made of nanofibers with small diameters and high surface potential, crucial features for fine particles filtration. As a case study, electrospun surgical masks are produced, demonstrating superior filtering and breathability performances, compared to traditional meltblown face masks, also complying with the European surgical mask standard (EN14683:2019).

Electrospun gelatin nanofibers attract great interest as a natural biomaterial for cartilage and tendon repair despite their high solubility in aqueous solution, which makes them also difficult to crosslink by means of chemical agents. In this work, we explore the efficiency of non-equilibrium atmospheric pressure plasma in stabilizing gelatin nanofibers. We demonstrate that plasma represents an innovative, easy and environmentally friendly approach to successfully crosslink gelatin electrospun mats directly in the solid state. Plasma treated gelatin mats display increased structural stability and excellent retention of fibrous morphology after immersion in aqueous solution. This method can be successfully applied to induce crosslinking both in pure gelatin and genipin-containing gelatin electrospun nanofibers, the latter requiring an even shorter plasma exposure time. A complete characterization of the crosslinked nanofibres, including mechanical properties, morphological observations, stability in physiological solution and structural modifications, has been carried out in order to get insights on the occurring reactions triggered by plasma.

Nerve growth factor (NGF) was the first-discovered member of the neurotrophin family, a class of bioactive molecules which exerts powerful biological effects on the CNS and other peripheral tissues, not only during development, but also during adulthood. While these molecules have long been regarded as potential drugs to combat acute and chronic neurodegenerative processes, as evidenced by the extensive data on their neuroprotective properties, their clinical application has been hindered by their unexpected side effects, as well as by difficulties in defining appropriate dosing and administration strategies. This paper reviews aspects related to the endogenous production of NGF in healthy and pathological conditions, along with conventional and biomaterial-assisted delivery strategies, in an attempt to clarify the impediments to the clinical application of this powerful molecule.

Laccases are oxidative enzymes that could be good candidates for the functionalization of biopolymers with several applications as biosensors for the determination of bioactive amine and alcohols, for bioremediation of industrial wastewater, and for greener catalysts in oxidation reactions in organic synthesis, especially used for non-phenolic compounds in combination with redox mediators in the so-called Laccase Mediator System (LMS). In this work, we describe the immobilization of Laccase from Trametes versicolor (LTv) in poly-L-lactic acid (PLLA) nanofibers and its application in LMS oxidation reactions. The PLLA-LTv catalysts were successfully produced by electrospinning of a water-in-oil emulsion with an optimized method. Different enzyme loadings (1.6, 3.2, and 5.1% w/w) were explored, and the obtained mats were thoroughly characterized. The actual amount of the enzyme in the fibers and the eventual enzyme leaching in different solvents were evaluated. Finally, the PLLA-LTv mats were successfully applied as such in the oxidation reaction of catechol, and in the LMS method with TEMPO as mediator in the oxidation of amines with the advantage of easier work-up procedures by the immobilized enzyme. However, the PLLA-LTv failed the oxidation of alcohols with respect to the free enzyme. A tentative explanation was provided.

Skeletal muscles are considered to date the best existing actuator in nature thanks to their hierarchical multiscale fibrous structure capable to enhance their strength and contractile performances. In recent years, driven by the growing of the soft robotics and tissue-engineering research field, many biomimetic soft actuators and scaffolds were designed by taking inspiration from the biological skeletal muscle. In this work we used the electrospinning technique to develop a hierarchically arranged nanofibrous structure resembling the morphology and passive biomechanical properties of skeletal muscles. To mimic the passive properties of muscle, a low-modulus polyurethane was used. Several electrospun structures (mats, bundles, and a muscle-like assembly) were produced with different internal 3D arrangements of the nanofibers. A thermal characterization through thermogravimetric and differential scanning calorimetry analysis investigated the physico-chemical properties of the material. The multiscale morphological similarities with the biological counterpart were verified by means of scanning electron microscopy investigation. The tensile tests on the different electrospun samples revealed that the muscle-like assembly presented slightly higher strength and stiffness compared to the skeletal muscle ones. Moreover, mathematical models of the mechanical behavior of the nanofibrous structures were successfully developed, allowing to better investigate the relationships between structure and mechanics of the samples. The promising results suggest the suitability of this hierarchical electrospun nanofibrous structure for applications in regenerative medicine and, if combined with active materials, in soft actuators for robotic.

In recent years, there has been an increasing interest in oncolytic adenoviral vectors as an alternative anticancer therapy. The induction of an immune response can be considered as a major limitation of this kind of application. Significant research efforts have been focused on the development of biodegradable polymer poly-gamma-glutamic acid (γ-PGA)-based nanoparticles used as a vector for effective and safe anticancer therapy, owing to their controlled and sustained-release properties, low toxicity, as well as biocompatibility with tissue and cells. This study aimed to introduce a specific destructive and antibody blind polymer-coated viral vector into cancer cells using γ-PGA and chitosan (CH). Adenovirus was successfully encapsulated into the biopolymer particles with an encapsulation efficiency of 92% and particle size of 485 nm using the ionic gelation method. Therapeutic agents or nanoparticles (NPs) that carry therapeutics can be directed specifically to cancerous cells by decorating their surfaces using targeting ligands. Moreover, in vitro neutralizing antibody response against viral capsid proteins can be somewhat reduced by encapsulating adenovirus into γ-PGA-CH NPs, as only 3.1% of the encapsulated adenovirus was detected by anti-adenovirus antibodies in the presented work compared to naked adenoviruses. The results obtained and the unique characteristics of the polymer established in this research could provide a reference for the coating and controlled release of viral vectors used in anticancer therapy.

A wide variety of materials, strategies, and methods have been proposed to face the challenge of wastewater pollution. The most innovative and promising approaches include the hybrid materials made of polymeric nanofibers and photocatalytic nanoparticles. Electrospun nanofibers with unique properties, such as nanosized diameter, large specific surface area, and high aspect ratio, represent promising materials to support and stabilize photocatalytic nanosized semiconductors. Additionally, the role performed by polymer nanofibers can be extended even further since they can act as an active medium for the in situ synthesis of photocatalytic metal nanoparticles or contribute to pollutant adsorption, facilitating their approach to the photocatalytic sites and their subsequent photodegradation. In this paper, we review the state of the art of electrospun polymer/semiconductor hybrid nanofibers possessing photocatalytic activity and used for the remediation of polluted water by light-driven processes (i.e., based on photocatalytic activity). The crucial role of polymer nanofibers and their versatility in these types of procedures are emphasized.

In‐vitro models are fundamental for studying muscular cell contractility and for wide‐screening of therapeutic candidates targeting skeletal muscle diseases, owing to their scalability, reproducibility, and circumvention of ethical concerns. However, in‐vitro assays permitting reliable electrical stimulation of cell contractile activity still require technological development. Here, a novel approach to electrically stimulate differentiated muscular cell contractility is reported exploiting the ionic conductivity and mechanical flexibility of 3D nanofibrous scaffolds. The electrospun poly(L‐lactide‐co‐caprolactone) scaffold allowed for C2C12 murine myoblasts horizontal elongation and myotubes formation. Scaffold porosity enables high ionic conductivity and strong electric field generation, orthogonally oriented to the scaffold surface. Electrically induced cell contractility is determined with atomic force microscopy (AFM) enabling real‐time monitoring of scaffold vibrations in liquid environment. Differentiated cell actuation is found to be linearly correlated to current amplitude and number of current stimuli. Integrating the 3D nanofibrous scaffolds with real‐time AFM monitoring provides highly accurate in‐vitro assays for biomedical research. The induction of electric fields orthogonal to the scaffold surface allows for accurately mimicking the excitation‐contraction coupling mechanism observed in native skeletal muscle tissue. This work paves the way for the quantitative study of muscular cell dynamic behavior and physiology, further evaluating therapy effectiveness for muscular pathologies. A novel in‐vitro method for stimulating muscle cell contractility is introduced using 3D nanofibrous scaffolds with high ionic conductivity. The poly(L‐lactide‐co‐caprolactone) scaffold obtained by electrospinning enables myoblast differentiation and transduces cell contraction into macroscopic vibrations measured with atomic force microscopy (AFM). This approach mimics skeletal muscle excitation‐contraction, offering precise tools for studying muscle physiology and potential therapeutic interventions.

Electrospun regenerated cellulose (RC) nanofiber membranes were prepared starting from cellulose acetate (CA) with different degrees of substitution. The process was optimized to obtain continuous and uniformly sized CA fibers. After electrospinning, the CA membranes were heat-treated to increase their tensile strength before deacetylation to obtain regenerated cellulose (RC). Affinity membranes were obtained by functionalization, exploiting the hydroxyl groups on the cellulose backbone. 1,4-Butanediol-diglycidyl ether was used to introduce epoxy groups onto the membrane, which was further bioconjugated with the anti-CD63 antibody targeting the tetraspanin CD63 on the extracellular vesicle membrane surface. The highest ligand density was obtained with an anti-CD63 antibody concentration of 6.4 µg/mL when bioconjugation was performed in carbonate buffer. The resulting affinity membrane was tested for the adsorption of extracellular vesicles (EVs) from human platelet lysate, yielding a very promising binding capacity above 10 mg/mL and demonstrating the suitability of this approach.

Background: Endothelial dysfunction triggers atherosclerosis pathogenesis. This study aimed at developing a 3D scaffold model able to reproduce in vitro the human vascular intima and study the endothelial damage induced by oxidative low-density lipoproteins (ox-LDLs) and shear stress. (2) Methods: Three-dimensional sandwich-like scaffolds were fabricated using electrospinning technology, functionalized with type I collagen and laminin, and subsequently coated with methacrylated gelatin hydrogel (GelMa) to achieve the final composite structure. Human umbilical vein endothelial cells (HUVECs) were used as the cell model for testing the suitability of 3D supports for cell culture exposed to ox-LDL both under static and shear stress conditions. Cell viability, ultrastructural morphology, and nitric oxide (NO) levels were analyzed. (3) Results: Electrospun mats and their functionalization were optimized to reproduce the chemical and physical properties of the vascular intima tunica. The 3D supports were suitable for the cell culture. Ox-LDL did not affect the HUVEC behavior in the 3D models under a static environment. Conversely, high shear stress (500 µL/min, HSS) significantly decreased the cell viability, also under the ox-LDL treatment. (4) Conclusions: Endothelial cell cultures on electrospun supports exposed to HSS provide a candidate in vitro model for investigating the endothelial dysfunction in atherosclerosis research. Technical improvements to the experimental setting are necessary for validating and standardizing the suggested 3D model.