Explore the vast range of titles available.

Air-stability is one of the most important considerations for the practical application of electrode materials in energy-harvesting/storage devices, ranging from solar cells to rechargeable batteries. The promising P2-layered sodium transition metal oxides (P2-Na x TmO 2 ) often suffer from structural/chemical transformations when contacted with moist air. However, these elaborate transitions and the evaluation rules towards air-stable P2-Na x TmO 2 have not yet been clearly elucidated. Herein, taking P2-Na 0.67 MnO 2 and P2-Na 0.67 Ni 0.33 Mn 0.67 O 2 as key examples, we unveil the comprehensive structural/chemical degradation mechanisms of P2-Na x TmO 2 in different ambient atmospheres by using various microscopic/spectroscopic characterizations and first-principle calculations. The extent of bulk structural/chemical transformation of P2-Na x TmO 2 is determined by the amount of extracted Na + , which is mainly compensated by Na + /H + exchange. By expanding our study to a series of Mn-based oxides, we reveal that the air-stability of P2-Na x TmO 2 is highly related to their oxidation features in the first charge process and further propose a practical evaluating rule associated with redox couples for air-stable Na x TmO 2 cathodes. Air-stability is a critical challenge faced by layered sodium transition metal oxide cathodes. Here, the authors depict a general and in-depth model of the structural/chemical evolution of P2-type layered oxides in air and propose an evaluation rule for the air-stability of layered sodium cathodes.

Layered transition metal oxides are the most important cathode materials for Li/Na/K ion batteries. Suppressing undesirable phase transformations during charge-discharge processes is a critical and fundamental challenge towards the rational design of high-performance layered oxide cathodes. Here we report a shale-like Na x MnO 2 (S-NMO) electrode that is derived from a simple but effective water-mediated strategy. This strategy expands the Na + layer spacings of P2-type Na 0.67 MnO 2 and transforms the particles into accordion-like morphology. Therefore, the S-NMO electrode exhibits improved Na + mobility and near-zero-strain property during charge-discharge processes, which leads to outstanding rate capability (100 mAh g −1 at the operation time of 6 min) and cycling stability (>3000 cycles). In addition, the water-mediated strategy is feasible to other layered sodium oxides and the obtained S-NMO electrode has an excellent tolerance to humidity. This work demonstrates that engineering the spacings of alkali-metal layer is an effective strategy to stabilize the structure of layered transition metal oxides. Suppressing phase transitions is crucial for the layered lithium/sodium transition metal oxide cathodes in batteries. Here, the authors report a water-mediated strategy to mitigate the phase transitions and boost electrochemical performances of manganese-based layered cathodes for cost-effective Na-ion batteries.

The performance of all-solid-state lithium metal batteries (SSLMBs) is affected by the presence of electrochemically inactive (i.e., electronically and/or ionically disconnected) lithium metal and solid electrolyte interphase (SEI), which are jointly termed inactive lithium. However, the differentiation and quantification of inactive lithium during cycling are challenging, and their lack limits the fundamental understanding of SSLMBs failure mechanisms. To shed some light on these crucial aspects, here, we propose operando nuclear magnetic resonance (NMR) spectroscopy measurements for real-time quantification and evolution-tracking of inactive lithium formed in SSLMBs. In particular, we examine four different sulfide-based solid electrolytes, namely, Li 10 GeP 2 S 12 , Li 9.54 Si 1.74 P 1.44 S 11.7 Cl 0.3 , Li 6 PS 5 Cl and Li 7 P 3 S 11 . We found that the chemistry of the solid electrolyte influences the activity of lithium. Furthermore, we demonstrate that electronically disconnected lithium metal is mainly found in the interior of solid electrolytes, and ionically disconnected lithium metal is found at the negative electrode surface. Moreover, by monitoring the Li NMR signal during cell calendar ageing, we prove the faster corrosion rate of mossy/dendritic lithium than flat/homogeneous lithium in SSLMBs. All-solid-state lithium batteries performance is affected by the solid electrolyte interphase (SEI) and electrically disconnected (“dead”) Li metal. Here, via operando NMR measurements, the authors quantify the Li metal in the SEI and “dead” regions using various inorganic solid-state electrolytes.

The misfolding and aggregation of proteins into amyloidogenic assemblies are key features of several metabolic and neurodegenerative diseases. Human insulin has long been known to form amyloid fibrils under various conditions, which affects its bioavailability and function. Clinically, insulin aggregation at recurrent injection sites poses a challenge for diabetic patients who rely on insulin therapy. Furthermore, decreased responsiveness to insulin in type 2 diabetic (T2D) patients may lead to its overproduction and accumulation as aggregates. Earlier reports have reported that various factors such as pH, temperature, agitation, and the presence of lipids or other proteins influence insulin aggregation. Our present study aims to elucidate the effects of non–micellar anionic DMPG (1,2–dimyristoyl–sn–glycero–3–phosphoglycerol) lipids on insulin aggregation. Distinct pathways of insulin aggregation and intermediate formation were observed in the presence of DMPG using a ThT fluorescence assay. The formation of soluble intermediates alongside large insulin fibrils was observed in insulin incubated with DMPG via TEM, DLS, and NMR as opposed to insulin aggregates generated without lipids. 13C magic angle spinning solid–state NMR and FTIR experiments indicated that lipids do not alter the conformation of insulin fibrils but do alter the time scale of motion of aromatic and aliphatic side chains. Furthermore, the soluble intermediates were found to be more cytotoxic than fibrils generated with or without lipids. Overall, our study elucidates the importance of anionic lipids in dictating the pathways and intermediates associated with insulin aggregation. These findings could be useful in determining various approaches to avoid toxicity and enhance the effectiveness of insulin in therapeutic applications.

In 1953, Pauling and Corey predicted that enantiomeric β-sheet peptides would coassemble into so-called “rippled” β-sheets, in which the β-sheets would consist of alternating l- and d-peptides. To date, this phenomenon has been investigated primarily with amphipathic peptide sequences composed of alternating hydrophilic and hydrophobic amino acid residues. Here, we show that enantiomers of a fragment of the amyloid-β (Aβ) peptide that does not follow this sequence pattern, amyloid-β (16–22), readily coassembles into rippled β-sheets. Equimolar mixtures of enantiomeric amyloid-β (16–22) peptides assemble into supramolecular structures that exhibit distinct morphologies from those observed by self-assembly of the single enantiomer pleated β-sheet fibrils. Formation of rippled β-sheets composed of alternating l- and d-amyloid-β (16–22) is confirmed by isotope-edited infrared spectroscopy and solid-state NMR spectroscopy. Sedimentation analysis reveals that rippled β-sheet formation by l- and d-amyloid-β (16–22) is energetically favorable relative to self-assembly into corresponding pleated β-sheets. This work illustrates that coassembly of enantiomeric β-sheet peptides into rippled β-sheets is not limited to peptides with alternating hydrophobic/hydrophilic sequence patterns, but that a broader range of sequence space is available for the design and preparation of rippled β-sheet materials.

The growth of sodium dendrites and the associated solid electrolyte interface (SEI) layer is a critical and fundamental issue influencing the safety and cycling lifespan of sodium batteries. In this work, we use in-situ 23Na magnetic resonance imaging (MRI) and nuclear magnetic resonance (NMR) techniques, along with an innovative analytical approach, to provide space-resolved and quantitative insights into the formation and evolution of sodium metal microstructures (SMSs; that is, dendritic and mossy Na metal) during the deposition and stripping processes. Our results reveal that the growing SMSs give rise to a linear increase in the overpotential until a transition voltage of 0.15 V is reached, at which point violent electrochemical decomposition of the electrolyte is triggered, leading to the formation of mossy-type SMSs and rapid battery failure. In addition, we determined the existence of NaH in the SEI on sodium metal with ex-situ NMR results. The poor electronic conductivity of NaH is beneficial for the growth of a stable SEI on sodium metal.Magnetic resonance imaging and spectroscopy provide quantitative insights into the growth of sodium microstructures in batteries.

The application of biochar to traditional soil and soilless growth media in agriculture has been reported to increase plant production. However, it remains unclear which biochar component drives this process or which biogeochemical process is attributed to better plant productivity. Therefore, this study aims to determine how biochar organic carbon (C) composition and thermal stability influence nitrogen availability and tomato production. Soilless growth media composed of a mixture of 60% and 40% coconut coir (CC) (Cocos nucifera L.) and fine pine bark (PB) (Pinus genus), respectively, was amended with 0, 1, 2, 3, 4, 6, 8, 10, and 12% biochar per dry weight. The amended media were used to grow Red Bounty tomatoes (Lycopersicum esculentum) for three months. After harvesting tomatoes and determining yield, organic C composition and C thermal stability of the biochar amended soilless growth media mixtures were determined using solid-state 13C nuclear magnetic resonance (13C NMR) and multi-elemental scanning thermal analysis (MESTA), respectively. Thermal stability data were used to determine the “R400 index”, and nitrate (NO3−) concentration was determined using the water extractable method. Results showed that biochar-amended media significantly increased pH (p < 0.0001) and NO3− (p = 0.0386) compared to the no-char control. Biochar amended soilless media organic C composition was dominated by O-alkyl-C as a result of a higher fraction of soilless media; however, total C, carboxyl-C, phenolic-C, and aromatic-C increased with increasing biochar content and related negatively to R400, which decreased with increasing biochar content. Nitrate retention and tomato yield increased with increasing total C, carboxyl-C, phenolic-C, and aromatic-C and decreasing R400. This indicates that the stable form of C, carboxyl-C, phenolic-C, aromatic-C, and low R400 enhanced NO3− sorption, reducing leaching and enhancing its availability for tomato growth.

Incorporation of 19F into proteins allows for the study of their molecular interactions via NMR. The study of 19F labeled aromatic amino acids has largely focused on 4-,5-, or 6-fluorotryptophan, 4-fluorophenylalanine, (4,5, or 6FW) or 3-fluorotyrosine (3FY), whereas 2-fluorotyrosine (2FY) has remained largely understudied. Here we report a comparative analysis with different fluorinated amino acids. We first report the NMR chemical shift responsiveness of five aromatic amino acid mimics to changes in solvent polarity and find that the most responsive, a mimic of 3FY, has a 2.9-fold greater change in chemical shift compared to the other amino acid mimics in aprotic solvents including the 2FY mimic. We also probed the utility of 2FY for 19F NMR by measuring its NMR relaxation properties in solution and the chemical shift anisotropy (CSA) of a polycrystalline sample of the amino acid by magic angle spinning. Using protein-observed fluorine NMR (PrOF NMR), we compared the influence of 2FY and 3FY incorporation on stability and pKa perturbation when incorporated into the KIX domain of CBP/p300. Lastly, we investigated the 19F NMR response of both 2FY and 3FY-labeled proteins to a protein–protein interaction partner, MLL, and discovered that 2FY can report on allosteric interactions that are not observed with 3FY-labeling in this protein complex. The reduced perturbation to pKa and similar but reduced CSA of 2FY to 3FY supports 2FY as a suitable alternative amino acid for incorporation into large proteins for 19F NMR analysis.

The SARS-CoV-2 E protein is a transmembrane (TM) protein with its N-terminus exposed on the external surface of the virus. At debate is its oligomeric state, let alone its function. Here, the TM structure of the E protein is characterized by oriented sample and magic angle spinning solid-state NMR in lipid bilayers and refined by molecular dynamics simulations. This protein was previously found to be a pentamer, with a hydrophobic pore that appears to function as an ion channel. We identify only a front-to-front, symmetric helix-helix interface, leading to a dimeric structure that does not support channel activity. The two helices have a tilt angle of only 6°, resulting in an extended interface dominated by Leu and Val sidechains. While residues Val14-Thr35 are almost all buried in the hydrophobic region of the membrane, Asn15 lines a water-filled pocket that potentially serves as a drug-binding site. The E and other viral proteins may adopt different oligomeric states to help perform multiple functions. A combination of oriented sample and magic angle spinning solid-state NMR, molecular modeling, and restrained molecular dynamics simulations reveals the dimeric structure of the SARS-CoV-2 E protein in liquid-crystalline lipid bilayers.

Amantadine is known to block the M2 proton channel of the Influenza A virus. Here, we present a structure of the M2 trans-membrane domain blocked with amantadine, built using orientational constraints obtained from solid-state NMR polarization-inversion-spin-exchange-at-the-magic-angle experiments. The data indicates a kink in the monomer between two helical fragments having 20° and 31° tilt angles with respect to the membrane normal. This monomer structure is then used to construct a plausible model of the tetrameric amantadine-blocked M2 trans-membrane channel. The influence of amantadine binding through comparative cross polarization magic-angle spinning spectra was also observed. In addition, spectra are shown of the amantadine-resistant mutant, S31N, in the presence and absence of amantadine.