Explore the vast range of titles available.

Type III secretion systems are used by many Gram-negative bacterial pathogens to inject proteins, known as effectors, into the cytosol of host cells. These virulence factors interfere with a diverse array of host signal transduction pathways and cellular processes. Many effectors have catalytic activities to promote post-translational modifications of host proteins. This review focuses on a family of effectors with glycosyltransferase activity that catalyze addition of N-acetyl-d-glucosamine to specific arginine residues in target proteins, leading to reduced NF-κB pathway activation and impaired host cell death. This family includes NleB from Citrobacter rodentium, NleB1 and NleB2 from enteropathogenic and enterohemorrhagic Escherichia coli, and SseK1, SseK2, and SseK3 from Salmonella enterica. First, we place these effectors in the general framework of the glycosyltransferase superfamily and in the particular context of the role of glycosylation in bacterial pathogenesis. Then, we provide detailed information about currently known members of this family, their role in virulence, and their targets.

Our aims were to identify potential differences in muscle mechanical properties (MMPs) of cervical and lumbar tissues and in spinal range of motion (ROM) between patients with acute low back pain (LBP) or acute neck pain (NP) and healthy controls, and to identify if ROMs and MMPs are able to identify subjects among the three groups. Clinical variables (pain, disability, fear of movement, kinesiophobia, quality of life), MMPs and ROMs were obtained in 33 subjects with acute LBP, 33 with acute NP, and 33 healthy control subjects. Between-groups differences and explanatory models to discriminate groups depending on MMPs and ROMs were calculated. The results showed that cervical tone was higher in patients with acute NP than in controls, while cervical decrement was higher in both spinal pain groups. Patients with acute NP showed reduced cervical flexion when compared to acute LBP and control groups, and also cervical rotation, but just against controls. Furthermore, lumbar flexion was reduced in patients with acute LBP when compared to those with acute NP. Cervical decrement was able to discriminate spinal pain individuals from controls in a multinominal regression (R2: Cox–Snell estimation = 0.533; Nagelkerke estimation = 0.600). Lumbar flexion differentiated patients with acute LBP and controls, whereas cervical flexion differentiated patients with acute NP and controls. This study supports a tendency of the affectation of other spinal regions when only one is affected.

SlrP is a protein with E3 ubiquitin ligase activity that is translocated by Salmonella enterica serovar Typhimurium into eukaryotic host cells through a type III secretion system. A yeast two-hybrid screen was performed to find new human partners for this protein. Among the interacting proteins identified by this screen was SNRPD2, a core component of the spliceosome. In vitro ubiquitination assays demonstrated that SNRPD2 is a substrate for the catalytic activity of SlrP, but not for other members of the NEL family of E3 ubiquitin ligases, SspH1 and SspH2. The lysine residues modified by this activity were identified by mass spectrometry. The identification of a new ubiquitination target for SlrP is a relevant contribution to the understanding of the role of this Salmonella effector.

Different musculoskeletal disorders are a source of pain in the spinal region; most of them can be divided into mechanical, such as low back pain (LBP), or inflammatory origins, as is the case of axial spondyloarthritis (axSpA). Nevertheless, insufficient information is available about the muscle negative consequences of these conditions. Thus, the objective of this study was to identify whether mechanical muscle properties (MMPs) of cervical and lumbar muscles are different between patients with axSpA, subacute LBP (sLBP), and healthy controls. Furthermore, we aimed identify whether MMPs were related to sociodemographic and clinical variables in various study groups. The MMPs, sociodemographic, and clinical variables were obtained in 43 patients with axSpA, 43 subjects with sLBP, and 43 healthy controls. One-way ANOVAs and ROC curves were applied to identify whether the MMPs could differentiate between the study groups. Intra-group Pearson r coefficients to test the associations between MMPs and the rest of the variables were calculated. The results showed that axSpA subjects have a higher tone and stiffness and a lower relaxation and creep than sLBP and healthy ones (p < 0.05). All lumbar and cervical MMPs, except for decrement, could correctly classify axSpA and healthy subjects and axSpA and sLBP patients (in both cases, Area Under the Curve > 0.8). However, no MMP could differentiate between sLBP and healthy subjects. Each group had a different pattern of bivariate correlations between MMPs and sociodemographic and clinical data, with a worse state and progression of the axSpA group associated with a higher tone and stiffness in both spinal regions. This study supports that MMPs are different and show different patterns of correlations depending on the type of spinal pain.

The evaluation and intercomparison of air quality models is key to reducing model errors and uncertainty. The projects AQMEII3 and EURODELTA-Trends, in the framework of the Task Force on Hemispheric Transport of Air Pollutants and the Task Force on Measurements and Modelling, respectively (both task forces under the UNECE Convention on the Long Range Transport of Air Pollution, LTRAP), have brought together various regional air quality models to analyze their performance in terms of air concentrations and wet deposition, as well as to address other specific objectives. This paper jointly examines the results from both project communities by intercomparing and evaluating the deposition estimates of reduced and oxidized nitrogen (N) and sulfur (S) in Europe simulated by 14 air quality model systems for the year 2010. An accurate estimate of deposition is key to an accurate simulation of atmospheric concentrations. In addition, deposition fluxes are increasingly being used to estimate ecological impacts. It is therefore important to know by how much model results differ and how well they agree with observed values, at least when comparison with observations is possible, such as in the case of wet deposition. This study reveals a large variability between the wet deposition estimates of the models, with some performing acceptably (according to previously defined criteria) and others underestimating wet deposition rates. For dry deposition, there are also considerable differences between the model estimates. An ensemble of the models with the best performance for N wet deposition was made and used to explore the implications of N deposition in the conservation of protected European habitats. Exceedances of empirical critical loads were calculated for the most common habitats at a resolution of 100 × 100m2 within the Natura 2000 network, and the habitats with the largest areas showing exceedances are determined. Moreover, simulations with reduced emissions in selected source areas indicated a fairly linear relationship between reductions in emissions and changes in the deposition rates of N and S. An approximate 20% reduction in N and S deposition in Europe is found when emissions at a global scale are reduced by the same amount. European emissions are by far the main contributor to deposition in Europe, whereas the reduction in deposition due to a decrease in emissions in North America is very small and confined to the western part of the domain. Reductions in European emissions led to substantial decreases in the protected habitat areas with critical load exceedances (halving the exceeded area for certain habitats), whereas no change was found, on average, when reducing North American emissions in terms of average values per habitat.

Objective: This study aimed to determine the validity and reliability of Inertial Measurement Units (IMUs) for the assessment of craniocervical range of motion (ROM) in patients with cerebral palsy (CP). Methods: twenty-three subjects with CP and 23 controls, aged between 4 and 14 years, were evaluated on two occasions, separated by 3 to 5 days. An IMU and a Cervical Range of Motion device (CROM) were used to assess craniocervical ROM in the three spatial planes. Validity was assessed by comparing IMU and CROM data using the Pearson correlation coefficient, the paired t-test and Bland–Altman plots. Intra-day and inter-day relative reliability were determined using the Intraclass Correlation Coefficient (ICC). The Standard Error of Measurement (SEM) and the Minimum Detectable Change at a 90% confidence level (MDC90) were obtained for absolute reliability. Results: High correlations were detected between methods in both groups on the sagittal and frontal planes (r > 0.9), although this was reduced in the case of the transverse plane. Bland–Altman plots indicated bias below 5º, although for the range of cervical rotation in the CP group, this was 8.2º. The distance between the limits of agreement was over 23.5º in both groups, except for the range of flexion-extension in the control group. ICCs were higher than 0.8 for both comparisons and groups, except for inter-day comparisons of rotational range in the CP group. Absolute reliability showed high variability, with most SEM below 8.5º, although with worse inter-day results, mainly in CP subjects, with the MDC90 of rotational range achieving more than 20º. Conclusions: IMU application is highly correlated with CROM for the assessment of craniocervical movement in CP and healthy subjects; however, both methods are not interchangeable. The IMU error of measurement can be considered clinically acceptable; however, caution should be taken when this is used as a reference measure for interventions.

Exposure to air particulate matter has been linked with hypertension and blood pressure levels. The metabolic risks of air pollution could vary according to the specific characteristics of each area, and has not been sufficiently evaluated in Spain. We analyzed 1103 individuals, participants in a Spanish nationwide population based cohort study (di@bet.es), who were free of hypertension at baseline (2008–2010) and completed a follow-up exam of the cohort (2016–2017). Cohort participants were assigned air pollution concentrations for particulate matter < 10 μm (PM 10 ) and < 2.5 μm (PM 2.5 ) during follow-up (2008–2016) obtained through modeling combined with measurements taken at air quality stations (CHIMERE chemistry-transport model). Mean and SD concentrations of PM 10 and PM 2.5 were 20.17 ± 3.91 μg/m 3 and 10.83 ± 2.08 μg/m 3 respectively. During follow-up 282 cases of incident hypertension were recorded. In the fully adjusted model, compared with the lowest quartile of PM 10, the multivariate weighted ORs (95% CIs) for developing hypertension with increasing PM 10 exposures were 0.82 (0.59–1.14), 1.28 (0.93–1.78) and 1.45 (1.05–2.01) in quartile 2, 3 and 4 respectively ( p for a trend of 0.003). The corresponding weighted ORs according to PM 2.5 exposures were 0.80 (0.57–1.13), 1.11 (0.80–1.53) and 1.48 (1.09–2.00) ( p for trend 0.004). For each 5-μg/m 3 increment in PM 10 and PM 2.5 concentrations, the odds for incident hypertension increased 1.22 (1.06–1.41) p  = 0.007 and 1.39 (1.07–1.81) p  = 0.02 respectively. In conclusion, our study contributes to assessing the impact of particulate pollution on the incidence of hypertension in Spain, reinforcing the need for improving air quality as much as possible in order to decrease the risk of cardiometabolic disease in the population.

Digital pulse shape analysis (DPSA) techniques are becoming increasingly important for the study of nuclear reactions since the development of fast digitizers. These techniques allow us to obtain the (A, Z) values of the reaction products impinging on the new generation solid-state detectors. In this paper, we present a computationally efficient method to discriminate isotopes with similar energy levels, with the aim of enabling the edge-computing paradigm in future field-programmable gate-array-based acquisition systems. The discrimination of isotope pairs with analogous energy levels has been a topic of interest in the literature, leading to various solutions based on statistical features or convolutional neural networks. Leveraging a valuable dataset obtained from experiments conducted by researchers in the FAZIA Collaboration at the CIME cyclotron in GANIL laboratories, we aim to establish a comparative analysis regarding selectivity and computational efficiency, as this dataset has been employed in several prior publications. Specifically, this work presents an approach to discriminate between pairs of isotopes with similar energies, namely, 12,13C, 36,40Ar, and 80,84Kr, using principal component analysis (PCA) for data preprocessing. Consequently, a linear and cubic machine learning (ML) support vector machine (SVM) classification model was trained and tested, achieving a high identification capability, especially in the cubic one. These results offer improved computational efficiency compared to the previously reported methodologies.

Atmospheric aerosols are one of the main factors that contribute to poor air quality. These aerosols are mostly concentrated within the atmospheric boundary layer (ABL) and mixing layer (ML). The ABL extends from ground level to the lowest level of the troposphere directly affected by surface temperature, solar irradiance, the orography and its proximity to coastal areas, causing turbulence in a daily cycle. This turbulence controls the vertical mixing of aerosols and pollutants and their dispersion in the ML. Therefore, proper characterization of these layers is of crucial importance in numerical weather forecasting and climate models; however, their estimation nowadays presents some spatial and temporal limitations. In order to deal with these limitations and to assess the influence of different meteorological conditions on the temporal evolution of the aforementioned layers, the evolution of the ML over Madrid (Spain) has been studied for the year 2020 by means of ceilometer profiles fed into the STRATfinder algorithm. This algorithm is able to give reliable estimates of the height of the ABL (ABLH) and ML (MLH). The results are compared with the ECMWF-IFS model predictions, which is able to compute the MLH under any meteorological condition. Then, the influence of the meteorology in the estimation of MLHs was established by classifying data based on the season and six different prevalent synoptic meteorological situations defined using ground-level pressure fields, as well as by splitting the days into four periods (morning, daytime, evening and nighttime). Our results show that both datasets, the STRATfinder values and the ECMWF-IFS model computations, are very sensitive to the meteorological conditions that play a main role in the MLH temporal evolution. For instance, high solar irradiance and ground radiation cause high turbulence and convection that lead to a well-developed ML. In cases in which the ML is well developed, both methods show similar results, and there are therefore better correlations between them. On the contrary, the results presented here show that the presence of high relative humidity and low temperatures hamper the growth of the ML, causing different errors in both MLH estimations and poor correlations between them. Furthermore, the ECMWF-IFS model has shown a sharp decrease, identified as an artificial behavior from 16:00 UTC, because of the influence of low solar zenith angles and the temporal interpolation. The STRATfinder algorithm also shows a sharp decrease just before the sunset because of the way the algorithm distinguishes between the ML and the residual layer. Thus, this study concludes that the MLH temporal evolution still needs to be characterized using complementary tools, since the methods presented here are strongly affected by the meteorological conditions and do not show enough reliability to work individually. However, ceilometer measurements offer great potential as a correction tool for ABL heights derived from models involved in air pollution dispersion assessments.

The lumbopelvic muscle mechanical properties (MMPs) are clinically relevant, but their dependence on sex remains unknown. Therefore, this study aimed to identify if lumbopelvic MMPs depend on the sex in a young adult population. Thirty-five healthy nulliparous women and 35 healthy men were analyzed (age range: 18–50). Lumbopelvic MMPs, that is, tone, stiffness, elasticity, relaxation and creep, assessed with MyotonPRO®, and pelvic floor (PF) health questionnaires were compared between-sexes. Intra-group correlations between sociodemographic and clinical data, and MMPs were also determined. The MMPs of PF were different between healthy non-climacteric adults of both sexes, with women showing higher values of tone and stiffness and lower values of elasticity and viscoelastic properties than men (in all cases, p  < 0.03). At lumbar level, tone and stiffness were higher for men at both sides (in all cases, p  < 0.04), and relaxation was lower at left side ( p  = 0.02). The MMPs showed few correlations with sociodemographic data within women. However, within males, there were positive correlations for PF stiffness and viscoelastic parameters with age, BMI and function (0.334 < r < 0.591) and, at lumbar level, negative correlations for tone and stiffness ( − 0.385 < r < −0.590) and positive correlations for viscoelastic properties (0.564 < r < 0.719), with BMI. This indicated that between-sexes differences of lumbopelvic MMPs depend on the specific location of assessment in healthy non-obese young individuals. Women show higher tone and stiffness and lower elasticity and viscoelasticity than men, at PF level.