Explore the vast range of titles available.

Borosilicate glass is an important material used in various industries due to its chemical durability, such as for the immobilization of high-level nuclear waste. However, it is susceptible to aqueous corrosion, recognizable by the formation of surface alteration layers (SALs). Here, we report in situ fluid-cell Raman spectroscopic experiments providing real-time insights into reaction and transport processes during the aqueous corrosion of a borosilicate glass. The formation of a several-micrometre-thick water-rich zone between the SAL and the glass, interpreted as an interface solution, is detected, as well as pH gradients at the glass surface and within the SAL. By replacing the solution with a deuterated solution, it is observed that water transport through the SAL is not rate-limiting. The data support an interface-coupled dissolution–reprecipitation process for SAL formation. Fluid-cell Raman spectroscopic experiments open up new avenues for studying solid–water reactions, with the ability to in situ trace specific sub-processes in real time by using stable isotopes.In situ Raman spectroscopic experiments reveal the real-time aqueous corrosion process of silicate glasses, providing insights into dynamics and mechanisms of glass dissolution reaction.

The co-precipitation of sulphate minerals such as celestine and barite is widely studied because their formation is ubiquitous in natural and anthropogenic systems. Co-precipitation in porous media results in crystallization of solid solutions yielding characteristics such as oscillatory zoning that are rarely observed in bulk solution or in batch experiments. In the past, the precipitation of compositionally-zoned (Ba,Sr)SO 4 crystals was observed post-mortem in macroscopic silica gel counter-diffusion experiments. Their formation was originally explained by the difference in the solubility products of the end-members combined with diffusion-limited transport of solutes to the mineral-fluid interface, while a later study favored the idea of kinetically controlled reactions. With recent advances combining in-operando microfluidic experiments and reactive transport modelling, it is now possible to verify hypotheses on the driving forces of transport-coupled geochemical processes. We developed a “lab on a chip” experiment that enabled the systematic study of the nucleation and growth of oscillatory-zoned (Ba,Sr)SO 4 crystals in a microfluidic reactor. The compositions of the solid solutions were determined by in-situ Raman spectroscopy. Our investigation shows (1) that the composition of the nucleating phases can be approximated using classical nucleation theory, (2) that the oscillatory zoning is not solely controlled by the limited diffusional transport of solutes, and (3) that nucleation kinetics plays a major role in the switch between different stoichiometric compositions. The zoning phenomena is governed by the complex interplay between the diffusion of reactants and the crystallization kinetics as well as other factors, e.g. surface tension and lattice mismatch.

Fluid-cell Raman spectroscopy is a space and time-resolving application allowing in operando studies of dynamic processes during solution–solid interactions. A currently heavily debated example is the corrosion mechanism of borosilicate glasses, which are the favoured material for the immobilization of high-level nuclear waste. With an upgraded fluid-cell lid design made entirely from the glass sample itself, we present the polymerization of the surface alteration layer over time in an initially acidic environment, including the differentiation between pore and surface-adsorbed water within it. Our results support an interface-coupled dissolution-precipitation model, which opposes traditional ion-exchange models for the corrosion mechanism. A sound description of the corrosion mechanism is essential for reliable numerical models to predict the corrosion rate of nuclear waste glasses during long-term storage in a geological repository.

Serpentinization-fueled systems in the cool, hydrated forearc mantle of subduction zones may provide an environment that supports deep chemolithoautotrophic life. Here, we examine serpentinite clasts expelled from mud volcanoes above the Izu–Bonin–Mariana subduction zone forearc (Pacific Ocean) that contain complex organic matter and nanosized Ni–Fe alloys. Using time-of-flight secondary ion mass spectrometry and Raman spectroscopy, we determined that the organic matter consists of a mixture of aliphatic and aromatic compounds and functional groups such as amides. Although an abiotic or subduction slab-derived fluid origin cannot be excluded, the similarities between the molecular signatures identified in the clasts and those of bacteria-derived biopolymers from other serpentinizing systems hint at the possibility of deep microbial life within the forearc. To test this hypothesis, we coupled the currently known temperature limit for life, 122 °C, with a heat conduction model that predicts a potential depth limit for life within the forearc at ∼10,000 m below the seafloor. This is deeper than the 122 °C isotherm in known oceanic serpentinizing regions and an order of magnitude deeper than the downhole temperature at the serpentinized Atlantis Massif oceanic core complex, Mid-Atlantic Ridge. We suggest that the organic-rich serpentinites may be indicators for microbial life deep within or below the mud volcano. Thus, the hydrated forearc mantle may represent one of Earth’s largest hidden microbial ecosystems. These types of protected ecosystems may have allowed the deep biosphere to thrive, despite violent phases during Earth’s history such as the late heavy bombardment and global mass extinctions.

Fossilization processes and especially the role of bacterial activity during the preservation of organic material has not yet been well understood. Here, we report the results of controlled taphonomic experiments with crayfish in freshwater and sediment. 16S rRNA amplicon analyzes showed that the development of the bacterial community composition over time was correlated with different stages of decay and preservation. Three dominating genera, Aeromonas , Clostridium and Acetobacteroides were identified as the main drivers in the decomposition of crayfish in freshwater. Using micro-computed tomography (µ-CT), scanning electron microscopy (SEM) and confocal Raman spectroscopy (CRS), calcite clusters were detected after 3–4 days inside crayfish carcasses during their decomposition in freshwater at 24 °C. The precipitation of calcite clusters during the decomposition process was increased in the presence of the bacterial genus Proteocatella . Consequently, Proteocatella might be one of the bacterial genera responsible for fossilization.

Vertebrate fossils embedded in amber represent a particularly valuable paleobiological record as amber is supposed to be a barrier to the environment, precluding significant alteration of the animals' body over geological time. The mode and processes of amber preservation are still under debate, and it is questionable to what extent original material may be preserved. Due to their high value, vertebrates in amber have never been examined with analytical methods, which means that the composition of bone tissue in amber is unknown. Here, we report our results of a study on a left forelimb from a fossil Anolis sp. indet. (Squamata) that was fully embedded in Miocene Dominican amber. Our results show a transformation of the bioapatite to fluorapatite associated with a severe alteration of the collagen phase and the formation of an unidentified carbonate. These findings argue for a poor survival potential of macromolecules in Dominican amber fossils.

Borosilicate glasses are currently used for the immobilization of highly radioactive waste and are materials of choice for many biomedical and research industries. They are metastable materials that corrode in aqueous solutions, reflected by the formation of silica-rich surface alteration layers (SAL). Until now, there is no consensus in the scientific community about the reaction and transport mechanism(s) and the rate-limiting steps involved in the formation of SALs. Here we report the results of multi-isotope tracer ( 2 H, 18 O, 10 B, 30 Si, 44 Ca) corrosion experiments that were performed with precorroded and pristine glass monoliths prepared from the six-component international simple glass and a quaternary aluminum borosilicate glass. Results of transmission electron microscopy and nanoscale analyses by secondary ion mass spectrometry reveal a nanometer-sharp interface between the SAL and the glass, where decoupling of isotope tracer occurs, while proton diffusion and ion exchange can be observed within the glass. We propose a unifying mechanistic model that accounts for all critical observations so far made on naturally and experimentally corroded glasses. It is based on an interface-coupled glass dissolution-silica precipitation reaction as the main SAL forming process. However, a diffusion-controlled ion exchange front may evolve in the glass ahead of the dissolution front if SAL formation at the reaction interface significantly slows down due to transport limitations. Alteration layer formation: model me this A unifying mechanistic model has been developed for silicate glass corrosion that can explain all critical observations made to-date. Borosilicate glasses are often used in biomedical devices and to store and dispose of radioactive waste. They decay in aqueous solution via the generation of a porous ‘surface alteration layer’ (SAL), the structure of which is different to the bulk. How the SAL forms is still not clear, however, an international team lead by Thorsten Geislern at the University of Bonn, Germany, has now used multi-isotope tracer experiments, to provide detailed insight into the distinct chemical and transport steps occurring during SAL formation. Their results suggest that an ‘interface-coupled dissolution-precipitation’ reaction is the main mechanism at play during SAL formation, but that, if slowed by transport limitations, it may be replaced by an ‘interdiffusion’ process.

The deposition of mineral phases on the heat transfer surfaces of brown coal power plants may have a negative effect on power plant boilers. The paragenesis of these deposits contains information about the actual temperature prevailed during the combustion of lignite, if the temperature-dependences of distinct mineral transformations or reactions are known. Here, we report results of a sintering study (to ~ 1100 °C) with samples containing anhydrite, quartz, and gehlenite, which are typical components of Rhenish lignite ashes. Thermal decompositions and solid-state reactions were analyzed (1) in situ and (2) both in situ and after quenching using confocal hyperspectral Raman imaging. This novel application of confocal Raman spectroscopy provides temperature- and time-resolved, 2-dimensional information about sintering processes with a micrometer-scale resolution. In the course of the sintering experiments with anhydrite and quartz with a weight ratio of 2:1 both polymorphs wollastonite and pseudowollastonite were identified in situ at about 920 and 1000 °C, respectively. The formation of pseudowollastonite was thus observed about 120 °C below the phase transition temperature, demonstrating that it can form metastably. In addition, α L ′ -Ca 2 SiO 4 was identified at about 1100 °C. In samples containing equal weight fractions of anhydrite and quartz that were quenched after firing for 9 h at about 1100 °C, β -Ca 2 SiO 4 (larnite) crystallized as rims around anhydrite grains and in direct contact to wollastonite. We furthermore observed that, depending on the ratio between quartz and anhydrite, wollastonite replaced quartz grains between 920 and 1100 °C., i.e., the higher the quartz content, the lower the formation temperature of wollastonite.

A natural, altered zircon crystal from an alkaline pegmatite from the Zomba–Malosa Complex of the Chilwa Alkaline Province in Malawi has been studied by a wide range of analytical techniques to understand the alteration process. The investigated zircon shows two texturally and chemically different domains. Whereas the central parts of the grain (zircon I) appear homogeneous in backscattered electron images and are characterised by high concentrations of trace elements, particularly Th, U, and Y, the outer regions (zircon II) contain significantly less trace elements, numerous pores, and inclusions of thorite, ytttrialite, and fergusonite. Zircon II contains very low or undetectable concentrations of non-formula elements such as Ca, Al, and Fe, which are commonly observed in high concentrations in altered radiation-damaged zircon. U–Pb dating of both zircon domains by LA-ICPMS and SHRIMP yielded statistically indistinguishable U–Pb weighted average ages of 119.3 ± 2.1 (2σ) and 118 ± 1.2 (2σ) Ma, respectively, demonstrating that the zircon had not accumulated a significant amount of self-irradiation damage at the time of the alteration event. Electron microprobe dating of thorite inclusions in zircon II yielded a Th–U-total Pb model age of 122 ± 5 (2σ) Ma, supporting the age relationship between both zircon domains. The hydrothermal solution responsible for the alteration of the investigated zircon was alkaline and rich in CO 3 2− , as suggested by the occurrence of REE carbonates and CO 2 -bearing fluid inclusions. The alteration of the crystalline, trace element-rich zircon is explained by an interface-coupled dissolution-reprecipitation mechanism. During such a process, the congruent dissolution of the trace element-rich parent zircon I was spatially and temporally coupled to the precipitation of the trace element-poor zircon II at an inward moving dissolution-precipitation front. The driving force for such a process was merely the difference between the solubility of the trace element-rich and -poor zircon in the hydrothermal solution. The replacement process and the occurrence of mineral inclusions and porosity in the product zircon II is explained by the thermodynamics of solid solution-aqueous solution systems.

Borosilicate glasses are key materials for immobilizing high-level nuclear waste. The effect of self-irradiation damage on the structural integrity of the glass and its aqueous corrosion resistance is not yet fully understood. This study investigates a ternary Na borosilicate glass irradiated with ~950 MeV gold ions, producing severe damage within a ~ 50 µm layer, and subsequently corroded in a 0.5 M NaHCO₃ solution at 81.2 °C for 12.5 days. Using operando Fluid-cell Raman spectroscopy and D 2 O as a tracer for water transport through the surface alteration layer (SAL), we observed (i) a 2.5-fold increased initial forward dissolution rate of the irradiated glass, (ii) a further increase of the dissolution rate at the irradiated/non-irradiated interface, (iii) elevated residual dissolution rates, and (iv) variations in the silica ring structures correlating with the changes in the rates. These findings confirm that irradiation enhances glass reactivity and support the interface-coupled dissolution–precipitation model for SAL formation.