Explore the vast range of titles available.

The flux of high-energy protons slow-extracted from the CERN Super Proton Synchrotron (SPS) is limited by the induced radioactivity caused by the beam loss intrinsic to the extraction process. Methods to substantially increase the efficiency of the extraction process are of great interest to fulfill requests for an increasing flux of 400 GeV protons to the present experiments, located in the North Area of the SPS, and also for potential future experiments with very high demanded protons on target. A crystal shadowing technique to significantly reduce the beam scattered and lost on the electrostatic extraction septum during the third-integer resonant slow extraction process has been developed and a prototype system tested with beam. The technique is based on the use of a thin, bent silicon crystal to coherently channel or volume reflect the portion of beam that would otherwise impinge the wire array of the electrostatic septum and instead eject it into the transfer line toward the production targets of the experiments. In this paper, the concept is described and applied to the SPS machine in order to specify the requirements of the prototype crystal shadowing system. Beam dynamics simulations of the prototype system are compared and benchmarked to the results obtained through beam tests, before being exploited to understand the characteristics of the present system and the potential performance reach of an optimized, future operational configuration. The remaining challenges faced to bring the system into operation, the optimization possibilities and other potential applications are discussed.

The effect of space charge on bunched beams has been the subject of numerous numerical and experimental studies in the first decade of 2000. Experimental campaigns performed at the CERN Proton Synchrotron in 2002 and at the GSI SIS18 in 2008 confirmed the existence of an underlying mechanism in the beam dynamics of periodic resonance crossing induced by the synchrotron motion and space charge. In this article we present an extension of the previous studies to describe the effect of space charge on a controlled coupled (2D) third order resonance. The experimental and simulation results of this latest campaign shed a new light on the difficulties of the 2D particle dynamics. We find striking experimental evidence that space charge and the coupled resonance create an unusual coupling in the phase space, leading to the formation of an asymmetric halo. Moreover, this study demonstrates a clear link between halo formation and fixed-lines.

During the commissioning of the CERN Proton Synchrotron multiturn extraction, tests with different beam intensities were performed in order to probe the behavior of resonance crossing in the presence of possible space charge effects. The initial beam intensity before transverse splitting was varied and the properties of the five beamlets obtained by crossing the fourth-order horizontal resonance were studied. A clear dependence of the beamlets’ parameters on the total beam intensity was found, which is the first direct observation of intensity-dependent effects for such a peculiar beam type. The experimental results are presented and discussed in detail in this paper.

The proton beams used for the fixed target physics at the Super Proton Synchrotron (SPS) are extracted from the Proton Synchrotron (PS) by a multiturn technique called continuous transfer (CT). During the CT extraction, large losses are observed in locations where the machine aperture should be large enough to accommodate the circulating beam. This limits the maximum intensity deliverable due to the induced stray radiation outside the PS tunnel. Scattered particles from the interaction with the electrostatic septum are identified as the possible source of these losses. This article presents a detailed study aiming to understand the origin of losses and propose possible cures. The simulations could reproduce accurately the beam loss pattern measured in real machine operation and determine the beam shaving, intrinsic to the extraction process, as the cause for the unexpected losses. Since these losses are unavoidable, the proposed solution implies a new optics scheme displacing the losses to a region with better shielding. New simulations demonstrate the satisfactory performance of the new extraction optics and its suitability to be implemented in the machine. Finally, beam loss measurements in these new operation conditions confirmed the previous simulation results.

A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders design, physics and detector studies. The aim is to provide a global perspective of the field and to outline directions for future work.

The CERN-MEDICIS (MEDical Isotopes Collected from ISolde) facility has delivered its first radioactive ion beam at CERN (Switzerland) in December 2017 to support the research and development in nuclear medicine using non-conventional radionuclides. Since then, fourteen institutes, including CERN, have joined the collaboration to drive the scientific program of this unique installation and evaluate the needs of the community to improve the research in imaging, diagnostics, radiation therapy and personalized medicine. The facility has been built as an extension of the ISOLDE (Isotope Separator On Line DEvice) facility at CERN. Handling of open radioisotope sources is made possible thanks to its Radiological Controlled Area and laboratory. Targets are being irradiated by the 1.4 GeV proton beam delivered by the CERN Proton Synchrotron Booster (PSB) on a station placed between the High Resolution Separator (HRS) ISOLDE target station and its beam dump. Irradiated target materials are also received from external institutes to undergo mass separation at CERN-MEDICIS. All targets are handled via a remote handling system and exploited on a dedicated isotope separator beamline. To allow for the release and collection of a specific radionuclide of medical interest, each target is heated to temperatures of up to 2,300°C. The created ions are extracted and accelerated to an energy up to 60 kV, and the beam steered through an off-line sector field magnet mass separator. This is followed by the extraction of the radionuclide of interest through mass separation and its subsequent implantation into a collection foil. In addition, the MELISSA (MEDICIS Laser Ion Source Setup At CERN) laser laboratory, in service since April 2019, helps to increase the separation efficiency and the selectivity. After collection, the implanted radionuclides are dispatched to the biomedical research centers, participating in the CERN-MEDICIS collaboration, for Research & Development in imaging or treatment. Since its commissioning, the CERN-MEDICIS facility has provided its partner institutes with non-conventional medical radionuclides such as Tb-149, Tb-152, Tb-155, Sm-153, Tm-165, Tm-167, Er-169, Yb-175, and Ac-225 with a high specific activity. This article provides a review of the achievements and milestones of CERN-MEDICIS since it has produced its first radioactive isotope in December 2017, with a special focus on its most recent operation in 2020.

The FLUKA Monte Carlo code has recently undergone significant enhancements, driven by needs from its user community. Key improvements are discussed, such as a new point-wise treatment for the interactions of low-energy neutrons, the incorporation of a new model for nuclear elastic scattering of protons below 250 MeV, explicit generation of synchrotron radiation photons during charged particle tracking, a revised modeling approach for coherent effects in bent crystals, and the addition of arc-DPA scoring. While improving and extending FLUKA physics performance is essential, it is equally important to ensure the long-term maintainability of the codebase. This paper also outlines the strategy and substantial progress in evolving FLUKA to meet this objective. The FLUKA features are being translated into a new codebase, fulfilling essential criteria such as continuity in the user experience and compatibility with existing inputs, thus laying the foundation for a new FLUKA generation. The codebase makes use of the Geant4 toolkit when appropriate. Additionally, the enhanced collaboration with Geant4 has resulted in the development of an interface, detailed in this paper, that enables access to the FLUKA hadronic models from any Geant4 application.

The experimental setup of the new measurement of 239Pu fission and capture cross-section in the n_TOF time-of-flight facility at CERN is presented. The measurement aims to address the needs and demands of nuclear data users. The experiment incorporates an innovative fast Fission Fragment Detector and the n_TOF Total Absorption Calorimeter, enabling the implementation of the fission tagging technique. Preliminary results exhibit the robust performance of the detector systems, along with the high quality of the new 239Pu samples. These samples were exclusively produced for this measurement by the European Commission’s Joint Research Centre in Geel.

The experimental setup of the new measurement of 239 Pu fission and capture cross-section in the n_TOF time-of-flight facility at CERN is presented. The measurement aims to address the needs and demands of nuclear data users. The experiment incorporates an innovative fast Fission Fragment Detector and the n_TOF Total Absorption Calorimeter, enabling the implementation of the fission tagging technique. Preliminary results exhibit the robust performance of the detector systems, along with the high quality of the new 239 Pu samples. These samples were exclusively produced for this measurement by the European Commission’s Joint Research Centre in Geel.