Explore the vast range of titles available.

We present an automatic aerosol classification method based solely on the European Aerosol Research Lidar Network (EARLINET) intensive optical parameters with the aim of building a network-wide classification tool that could provide near-real-time aerosol typing information. The presented method depends on a supervised learning technique and makes use of the Mahalanobis distance function that relates each unclassified measurement to a predefined aerosol type. As a first step (training phase), a reference dataset is set up consisting of already classified EARLINET data. Using this dataset, we defined 8 aerosol classes: clean continental, polluted continental, dust, mixed dust, polluted dust, mixed marine, smoke, and volcanic ash. The effect of the number of aerosol classes has been explored, as well as the optimal set of intensive parameters to separate different aerosol types. Furthermore, the algorithm is trained with literature particle linear depolarization ratio values. As a second step (testing phase), we apply the method to an already classified EARLINET dataset and analyze the results of the comparison to this classified dataset. The predictive accuracy of the automatic classification varies between 59 % (minimum) and 90 % (maximum) from 8 to 4 aerosol classes, respectively, when evaluated against pre-classified EARLINET lidar. This indicates the potential use of the automatic classification to all network lidar data. Furthermore, the training of the algorithm with particle linear depolarization values found in the literature further improves the accuracy with values for all the aerosol classes around 80 %. Additionally, the algorithm has proven to be highly versatile as it adapts to changes in the size of the training dataset and the number of aerosol classes and classifying parameters. Finally, the low computational time and demand for resources make the algorithm extremely suitable for the implementation within the single calculus chain (SCC), the EARLINET centralized processing suite.

Measurements on 27 June 2011 were performed over the Southern Iberian Peninsula at Granada EARLINET station, using active and passive remote sensing and airborne and surface in-situ data in order to study the entrainment processes between aerosols in the free troposphere and those in the planetary boundary layer (PBL). To this aim the temporal evolution of the lidar depolarisation, backscatter-related Angström exponent and potential temperature profiles were used in combination with the PBL contribution to the aerosol optical depth (AOD). Our results show that the mineral dust entrainment in the PBL was caused by the convective processes which 'trapped' the lofted mineral dust layer, distributing the mineral dust particles within the PBL. The temporal evolution of ground-based in-situ data evidenced the impact of this process at surface level. Finally, the amount of mineral dust in the atmospheric column available to be dispersed into the PBL was estimated by means of POLIPHON (Polarizing Lidar Photometer Networking). The dust mass concentration derived from POLIPHON was compared with the coarse-mode mass concentration retrieved with airborne in-situ measurements. Comparison shows differences below 50 µg/m 3 (30% relative difference) indicating a relative good agreement between both techniques.

The CALIPSO Level 3 (CL3) product is the most recent data set produced by the observations of the Cloud–Aerosol Lidar with Orthogonal Polarization (CALIOP) instrument onboard the Cloud–Aerosol Lidar and Pathfinder Satellite Observations (CALIPSO) space platform. The European Aerosol Research Lidar Network (EARLINET), based mainly on multi-wavelength Raman lidar systems, is the most appropriate ground-based reference for CALIPSO calibration/validation studies on a continental scale. In this work, CALIPSO data are compared against EARLINET monthly averaged profiles obtained by measurements performed during CALIPSO overpasses. In order to mitigate uncertainties due to spatial and temporal differences, we reproduce a modified version of CL3 data starting from CALIPSO Level 2 (CL2) data. The spatial resolution is finer and nearly 2°  ×  2° (latitude  ×  longitude) and only simultaneous measurements are used for ease of comparison. The CALIPSO monthly mean profiles following this approach are called CALIPSO Level 3*, CL3*. We find good agreement on the aerosol extinction coefficient, yet in most of the cases a small CALIPSO underestimation is observed with an average bias of 0.02 km−1 up to 4 km and 0.003 km−1 higher above. In contrast to CL3 standard product, the CL3* data set offers the possibility to assess the CALIPSO performance also in terms of the particle backscatter coefficient keeping the same quality assurance criteria applied to extinction profiles. The mean relative difference in the comparison improved from 25 % for extinction to 18 % for backscatter, showing better performances of CALIPSO backscatter retrievals. Additionally, the aerosol typing comparison yielded a robust identification of dust and polluted dust. Moreover, the CALIPSO aerosol-type-dependent lidar ratio selection is assessed by means of EARLINET observations, so as to investigate the performance of the extinction retrievals. The aerosol types of dust, polluted dust, and clean continental showed noticeable discrepancy. Finally, the potential improvements of the lidar ratio assignment have been examined by adjusting it according to EARLINET-derived values.

Airborne observations have shown high concentrations of ultrafine aerosols in the Amazon upper troposphere (UT), which are key for replenishing the planetary boundary layer (PBL) with cloud condensation nuclei that sustain the “green ocean” clouds. Given their climatic relevance, long-term observations are needed, but aircraft measurements are only available in short-term campaigns. Alternatively, continuous observations of the aerosol vertical structure could be performed by a lidar (acronym for “light detection and ranging”) system in long-term campaigns. Here we assess whether a ground-based tropospheric lidar system could detect these ultrafine UT aerosols. To this aim, we simulated the lidar signal of a real instrument and then varied the instrument’s efficiency and the UT-particle concentration to determine under which conditions the detection is possible. Optical properties were computed with a Mie code based on the size distributions and numerical concentration profiles measured by the aircraft, and on the refractive indexes inverted from AERONET measurements. The aerosol optical depth (AOD) was retrieved by inverting the elastic lidar signal, and a statistical test was applied to evaluate the detection of the UT-aerosol layer. Our results indicate that, for the instrument we simulated, a 55-fold increase in the signal-to-noise ratio (SNR) is required for a 100% detection rate. This could be achieved by simultaneously time averaging over 30 min and spatially averaging to vertical bin lengths of 375 m, or by modifying the hardware. We repeated the analysis for under- and overestimated aerosol lidar ratio (Laer), and found that possible systematic errors did not affect the detection rate. Further studies are necessary to assess whether such long-time averages are feasible in the Amazon region (given the very high cloud cover), and to design a hardware upgrade. Although simulations and analyses here were based on a particular instrument and for the presence of new organic particles in the Amazonian upper troposphere, our methodology and results are general and applicable to other instruments and sites.

The aim of this study was to analyze the potential of the GRASP code to retrieve optical and microphysical properties vertically-resolved using a synergy of polarized Micro-Pulse Lidar and Sun/sky photometer observations. The focus was on the long-range transport of Canadian aged-smoke plumes observed at El Arenosillo/Huelva (Spain) from 7 to 8 September 2017. Both the columnar and height-resolved microphysical and optical properties were assessed in comparison with AERONET data and vertical lidar-retrieved profiles, respectively. In particular, the vertical properties were also derived using the POLIPHON approach, which serves as a comparison for GRASP retrievals. The retrieved columnar aerosol microphysical properties (volume concentration and effective radius) showed an excellent agreement, with negligible differences, and were within the uncertainties. Nevertheless, for the retrieved columnar optical properties, we could only perform an individual comparison, due to the strong AERONET limitations, and although the agreements were generally good, no conclusions were obtained, due to differences in the real refractive index and due to the large uncertainties obtained in the retrievals. For the vertical profiles, however, we present a large advance that permits obtaining aerosol backscatter and extinction coefficients, plus volume concentrations, without the need for internal assumptions (extinction-to-backscatter ratios and depolarization measurements), due to the very good agreement observed between GRASP and the lidar-derived methodologies. However, the separation of the properties into their fine and coarse modes was not feasible using the one-wavelength elastic lidar measurements with the GRASP retrieval configuration used in this work. Therefore, current studies are being addressed to assessing the introduction of lidar depolarization in the GRASP code as an encouraged added-value, for the improvement of the retrieval of vertical aerosol properties.

The atmospheric boundary layer (ABL) defines the volume of air adjacent to the Earth's surface for the dilution of heat, moisture, and trace substances. Quantitative knowledge on the temporal and spatial variations in the heights of the ABL and its sub-layers is still scarce, despite their importance for a series of applications (including, for example, air quality, numerical weather prediction, greenhouse gas assessment, and renewable energy production). Thanks to recent advances in ground-based remote-sensing measurement technology and algorithm development, continuous profiling of the entire ABL vertical extent at high temporal and vertical resolution is increasingly possible. Dense measurement networks of autonomous ground-based remote-sensing instruments, such as microwave radiometers, radar wind profilers, Doppler wind lidars or automatic lidars and ceilometers are hence emerging across Europe and other parts of the world. This review summarises the capabilities and limitations of various instrument types for ABL monitoring and provides an overview on the vast number of retrieval methods developed for the detection of ABL sub-layer heights from different atmospheric quantities (temperature, humidity, wind, turbulence, aerosol). It is outlined how the diurnal evolution of the ABL can be monitored effectively with a combination of methods, pointing out where instrumental or methodological synergy are considered particularly promising. The review highlights the fact that harmonised data acquisition across carefully designed sensor networks as well as tailored data processing are key to obtaining high-quality products that are again essential to capture the spatial and temporal complexity of the lowest part of the atmosphere in which we live and breathe.

In this work, a statistical study of aerosol optical properties retrieved from Raman lidar profiles has been addressed at the EARLINET station of Granada, Spain, during the period 2008-2010. Lidar measurements were performed during day- and night-time. Mean values and variances of the aerosol extinction and backscatter coefficient profiles in the troposphere have been computed. These profiles evidenced that during autumn-winter, most of the particles are confined to the first kilometres above the surface (below 3500 m above sea level), while a major presence of aerosol at higher altitudes is observed during spring-summer. Moreover, a study of the planetary boundary layer (PBL) height and aerosol stratification has been performed for the whole studied period. Monthly mean β-related Angström exponent values have been obtained for aerosols in the PBL and in the free troposphere. Furthermore, monthly mean lidar ratio values at 532 nm have been retrieved from Raman profiles during night-time. A detailed study of these intensive properties has allowed characterizing the aerosol present over our station. The results evidenced a predominance of large and scattering particles during spring and summer and an increase of small and absorbing particles during autumn and winter.

In this work we present an analysis of aerosol microphysical properties during a mineral dust event taking advantage of the combination of different state-of-the-art retrieval techniques applied to active and passive remote sensing measurements and the evaluation of some of those techniques using independent data acquired from in situ aircraft measurements. Data were collected in a field campaign performed during a mineral dust outbreak at the Granada, Spain, experimental site (37.16° N, 3.61° W, 680 m a.s.l.) on 27 June 2011. Column-integrated properties are provided by sun- and star-photometry, which allows for a continuous evaluation of the mineral dust optical properties during both day and nighttime. Both the linear estimation and AERONET (Aerosol Robotic Network) inversion algorithms are applied for the retrieval of the column-integrated microphysical particle properties. In addition, vertically resolved microphysical properties are obtained from a multi-wavelength Raman lidar system included in EARLINET (European Aerosol Research Lidar Network), by using both LIRIC (Lidar Radiometer Inversion Code) algorithm during daytime and an algorithm applied to the Raman measurements based on the regularization technique during nighttime. LIRIC retrievals reveal the presence of dust layers between 3 and 5 km a.s.l. with volume concentrations of the coarse spheroid mode up to 60 µm3 cm−3. The combined use of the regularization and LIRIC methods reveals the night-to-day evolution of the vertical structure of the mineral dust microphysical properties and offers complementary information to that from column-integrated variables retrieved from passive remote sensing. Additionally, lidar depolarization profiles and LIRIC retrieved volume concentration are compared with aircraft in situ measurements. This study presents for the first time a comparison of the total volume concentration retrieved with LIRIC with independent in situ measurements, obtaining agreement within the estimated uncertainties for both methods and quite good agreement for the vertical distribution of the aerosol layers. Regarding the depolarization, the first published data set of the CAS-POL for polarization ratios is presented here and qualitatively compared with the lidar technique.

This work evaluates the Lidar-Radiometer Inversion Code (LIRIC) using sun-sky photometers located at different altitudes in the same atmospheric column. Measurements were acquired during an intensive observational period in summer 2012 at Aerosols, Clouds, and Trace gases Research InfraStructure Network (ACTRIS)/Aerosol Robotic Network (AERONET) Granada (GRA; 37.16°N, 3.61°W, 680 m above sea level (a.s.l.)) and Cerro Poyos (CP; 37.11°N, 3.49°W, 1820 m a.s.l.) sites. Both stations operated AERONET sun-photometry, with an additional lidar system operating at Granada station. The extended database of simultaneous lidar and sun-photometry measurements from this study allowed the statistical analysis of vertically resolved microphysical properties retrieved with LIRIC, with 70% of the analyzed cases corresponding to mineral dust. Consequently, volume concentration values were 46 μm3/cm3 on average, with a value of ~30 μm3/cm3 corresponding to the coarse spheroid mode and concentrations below 10 μm3/cm3 for the fine and coarse spherical modes. According to the microphysical properties’ profiles, aerosol particles reached altitudes up to 6000 m a.s.l., as observed in previous studies over the same region. Results obtained from comparing the LIRIC retrievals from GRA and from CP revealed good agreement between both stations with differences within the expected uncertainties associated with LIRIC (15%). However, larger discrepancies were found for 10% of the cases, mostly due to the incomplete overlap of the lidar signal and/or to the influence of different aerosol layers advected from the local origin located between both stations, which is particularly important in cases of low aerosol loads. Nevertheless, the results presented here demonstrate the robustness and self-consistency of LIRIC and consequently its applicability to large databases such as those derived from ACTRIS-European Aerosol Research Lidar Network (EARLINET) observations.

The interest in the use of ceilometers for optical aerosol characterization has increased in the last few years. They operate continuously almost unattended and are also much less expensive than lidars; hence, they can be distributed in dense networks over large areas. However, due to the low signal-to-noise ratio it is not always possible to obtain particle backscatter coefficient profiles, and the vast number of data generated require an automated and unsupervised method that ensures the quality of the profiles inversions. In this work we describe a method that uses aerosol optical depth (AOD) measurements from the AERONET network that it is applied for the calibration and automated quality assurance of inversion of ceilometer profiles. The method is compared with independent inversions obtained by co-located multiwavelength lidar measurements. A difference smaller than 15 % in backscatter is found between both instruments. This method is continuously and automatically applied to the Iberian Ceilometer Network (ICENET) and a case example during an unusually intense dust outbreak affecting the Iberian Peninsula between 20 and 24 February 2016 is shown. Results reveal that it is possible to obtain quantitative optical aerosol properties (particle backscatter coefficient) and discriminate the quality of these retrievals with ceilometers over large areas. This information has a great potential for alert systems and model assimilation and evaluation.