Catalogue Search | MBRL
Are you sure you want to remove the book from the shelf?
{{itemTitle}}
41,985
result(s) for
"Guo, Yu"
Sort by:
Boron-doped sodium layered oxide for reversible oxygen redox reaction in Na-ion battery cathodes
Na-ion cathode materials operating at high voltage with a stable cycling behavior are needed to develop future high-energy Na-ion cells. However, the irreversible oxygen redox reaction at the high-voltage region in sodium layered cathode materials generates structural instability and poor capacity retention upon cycling. Here, we report a doping strategy by incorporating light-weight boron into the cathode active material lattice to decrease the irreversible oxygen oxidation at high voltages (i.e., >4.0 V vs. Na
+
/Na). The presence of covalent B–O bonds and the negative charges of the oxygen atoms ensures a robust ligand framework for the NaLi
1/9
Ni
2/9
Fe
2/9
Mn
4/9
O
2
cathode material while mitigating the excessive oxidation of oxygen for charge compensation and avoiding irreversible structural changes during cell operation. The B-doped cathode material promotes reversible transition metal redox reaction enabling a room-temperature capacity of 160.5 mAh g
−1
at 25 mA g
−1
and capacity retention of 82.8% after 200 cycles at 250 mA g
−1
. A 71.28 mAh single-coated lab-scale Na-ion pouch cell comprising a pre-sodiated hard carbon-based anode and B-doped cathode material is also reported as proof of concept.
The irreversible oxygen redox reaction during charging to the high-voltage region causes cathode structural degradation and Na-ion cell capacity fading. Here, the authors report a B-doped cathode active material to mitigate the irreversible oxygen oxidation and increase the cell capacity.
Journal Article
Sodium iron hexacyanoferrate with high Na content as a Na-rich cathode material for Na-ion batteries
Owing to the worldwide abundance and low-cost of Na, room-temperature Na-ion batteries are emerging as attractive energy storage systems for large- scale grids. Increasing the Na content in cathode materials is one of the effective ways to achieve high energy density. Prussian blue and its analogues （PBAs） are promising Na-rich cathode materials since they can theoretically store two Na＋ ions per formula unit. However, increasing the Na content in PBAs cathode materials remains a major challenge. Here we show that sodium iron hexacyanoferrate with high Na content can be obtained by simply controlling the reducing agent and reaction atmosphere during synthesis. The Na content can reach as high as 1.63 per formula, which is the highest value for sodium iron hexacyanoferrate. This Na-rich sodium iron hexacyanoferrate demonstrates a high specific capacity of 150 mAh·g^-1 and remarkable cycling performance with 90% capacity retention after 200 cycles. Furthermore, the Na intercalation/ de-intercalation mechanism has been systematically studied by in situ Raman spectroscopy, X-ray diffraction and X-ray absorption spectroscopy analysis for the first time. The Na-rich sodium iron hexacyanoferrate can function as a plenteous Na reservoir and has great potential as a cathode material for practical Na-ion batteries.
Journal Article
Common knowledge about Chinese culture
Traditional Chinese ideology - Traditional virtues of China - Ancient Chinese literature - Science and technology of ancient China - Traditional Chinese art - Chinese cultural relics - Ancient Chinese architecture - Chinese arts and crafts - Chinese folk customs - Life of the Chinese people.
Book
A Dual‐Salt Gel Polymer Electrolyte with 3D Cross‐Linked Polymer Network for Dendrite‐Free Lithium Metal Batteries
Lithium metal batteries show great potential in energy storage because of their high energy density. Nevertheless, building a stable solid electrolyte interphase (SEI) and restraining the dendrite growth are difficult to realize with traditional liquid electrolytes. Solid and gel electrolytes are considered promising candidates to restrain the dendrites growth, while they are still limited by low ionic conductivity and incompatible interphases. Herein, a dual‐salt (LiTFSI‐LiPF6) gel polymer electrolyte (GPE) with 3D cross‐linked polymer network is designed to address these issues. By introducing a dual salt in 3D structure fabricated using an in situ polymerization method, the 3D‐GPE exhibits a high ionic conductivity (0.56 mS cm−1 at room temperature) and builds a robust and conductive SEI on the lithium metal surface. Consequently, the Li metal batteries using 3D‐GPE can markedly reduce the dendrite growth and achieve 87.93% capacity retention after cycling for 300 cycles. This work demonstrates a promising method to design electrolytes for lithium metal batteries. A 3D cross‐linked gel polymer electrolyte shows effective function in uniform lithium deposition compared with traditional liquid electrolytes. The formation of stable interphase effectively restrains lithium dendrite growth, and contributes greatly to lithium cycling performance, achieving 87.93% capacity retention after cycling for 300 cycles at room temperature.
Journal Article
Tuning wettability of molten lithium via a chemical strategy for lithium metal anodes
Metallic lithium affords the highest theoretical capacity and lowest electrochemical potential and is viewed as a leading contender as an anode for high-energy-density rechargeable batteries. However, the poor wettability of molten lithium does not allow it to spread across the surface of lithiophobic substrates, hindering the production and application of this anode. Here we report a general chemical strategy to overcome this dilemma by reacting molten lithium with functional organic coatings or elemental additives. The Gibbs formation energy and newly formed chemical bonds are found to be the governing factor for the wetting behavior. As a result of the improved wettability, a series of ultrathin lithium of 10–20 μm thick is obtained together with impressive electrochemical performance in lithium metal batteries. These findings provide an overall guide for tuning the wettability of molten lithium and offer an affordable strategy for the large-scale production of ultrathin lithium, and could be further extended to other alkali metals, such as sodium and potassium.
Molten lithium cannot spread onto the lithiophobic substrate, hindering the production and application of lithium metal anodes. Here, the authors show a general chemical strategy to tune the wettability by forming new chemical bonds through the reactions with various organic coatings or elemental additives.
Journal Article
Advanced Micro/Nanostructures for Lithium Metal Anodes
Owning to their very high theoretical capacity, lithium metal anodes are expected to fuel the extensive practical applications in portable electronics and electric vehicles. However, unstable solid electrolyte interphase and lithium dendrite growth during lithium plating/stripping induce poor safety, low Coulombic efficiency, and short span life of lithium metal batteries. Lately, varies of micro/nanostructured lithium metal anodes are proposed to address these issues in lithium metal batteries. With the unique surface, pore, and connecting structures of different nanomaterials, lithium plating/stripping processes have been regulated. Thus the electrochemical properties and lithium morphologies have been significantly improved. These micro/nanostructured lithium metal anodes shed new light on the future applications for lithium metal batteries. Micro/nanostructured lithium metal anodes are proposed to retard the formation of lithium dendrites in lithium metal batteries. With the unique surface, pore, and connecting structures of different nanomaterials, lithium plating/stripping processes have been modulated. The electrochemical properties and lithium morphologies have been significantly regulated.
Journal Article