Explore the vast range of titles available.

Dislocations are usually expected to degrade electrical, thermal and optical functionality and to tune mechanical properties of materials. Here, we demonstrate a general framework for the control of dislocation–domain wall interactions in ferroics, employing an imprinted dislocation network. Anisotropic dielectric and electromechanical properties are engineered in barium titanate crystals via well-controlled line-plane relationships, culminating in extraordinary and stable large-signal dielectric permittivity (≈23100) and piezoelectric coefficient (≈2470 pm V –1 ). In contrast, a related increase in properties utilizing point-plane relation prompts a dramatic cyclic degradation. Observed dielectric and piezoelectric properties are rationalized using transmission electron microscopy and time- and cycle-dependent nuclear magnetic resonance paired with X-ray diffraction. Succinct mechanistic understanding is provided by phase-field simulations and driving force calculations of the described dislocation–domain wall interactions. Our 1D-2D defect approach offers a fertile ground for tailoring functionality in a wide range of functional material systems. Dislocations are often perceived as a culprit for degradation in functionality. Here, the authors introduce a general framework for engineering dislocations and domain walls and demonstrate its full potential on a ferroelectric BaTiO 3 single crystal.

Piezoelectric single crystals based on the perovskite ferroelectric system (K,Na)NbO 3 have been widely investigated over the past 20 years due to large piezoelectric coefficients, high transition temperatures, low density, and the nontoxic chemical composition. Various crystal growth methods were examined, including high-temperature solution growth, solid-state crystal growth, Bridgman–Stockbarger method, and the floating zone method. Increased understanding of the crystal growth process and post-growth treatments resulted in improved crystal quality and larger sizes. Recently, crystals with high piezoelectric and electromechanical coupling coefficients exceeding 1000 pC/N and 0.90, respectively, were reported. Moreover, their large potential for high-frequency ultrasonic medical imaging was demonstrated. This work provides a review of the development of piezoelectric (K,Na)NbO 3 -based single crystals, including their growth, defect chemistry, domain structures, electromechanical properties, and applications. Approaches for reducing growth defects, controlling point defects, and domain engineering are discussed. The remaining open issues are presented and an outlook on the future is provided.

BaTiO 3 single crystals were deformed in compression along the ⟨ 110 ⟩ crystal axis to study the plastic deformability and dislocation structures at high temperatures under different loading conditions. The yield strength is determined from stress–strain curves under strain rate control, load control, strain rate cycling tests, and under step-wise loading conditions to elucidate the impact of measurement approach in yield strength behavior. A comparison between the chosen methods based on stress-dependent strain rate plots indicates that load control measurements are a suitable alternative to the commonly used strain rate-control experiments in metals. This allows avoiding overloading and providing an estimate of the overall achievable strain rates in a ceramic. Activation energies and activation volumes in the temperature range of 1100–1170 °C indicate a similar mechanical deformation behavior to SrTiO 3 . Graphical abstract

Dislocation networks have been demonstrated to substantially enhance functional properties. As-sintered samples are virtually devoid of dislocations, new innovative techniques for introducing sufficiently high dislocation densities into polycrystalline ceramics are needed. While dislocation-based plasticity at high temperatures has been demonstrated for a large range of ceramic single crystals, plasticity in polycrystals is much less understood. Here, we demonstrate plastic strains in excess of several % based on dislocation motion in polycrystalline SrTiO 3 at ≈ 1100 °C with 3.9 µm grain size. Ultra-high voltage electron microscopy reveals an associated increase in dislocation density by three orders of magnitude. Achievable strain rates are comparable to creep-based mechanisms and much less sensitive to applied stress than observed for metals. A specialized testing protocol allows quantification of the deformability via stress exponent, activation volume and activation enthalpy giving additional quantification. In conjunction with TEM images, the mechanical data gives insight into the underlying mechanisms.

Dislocation networks have been demonstrated to substantially enhance functional properties. As-sintered samples are virtually devoid of dislocations, new innovative techniques for introducing sufficiently high dislocation densities into polycrystalline ceramics are needed. While dislocation-based plasticity at high temperatures has been demonstrated for a large range of ceramic single crystals, plasticity in polycrystals is much less understood. Here, we demonstrate plastic strains in excess of several % based on dislocation motion in polycrystalline SrTiO.sub.3 at [almost equal to] 1100 °C with 3.9 [micro]m grain size. Ultra-high voltage electron microscopy reveals an associated increase in dislocation density by three orders of magnitude. Achievable strain rates are comparable to creep-based mechanisms and much less sensitive to applied stress than observed for metals. A specialized testing protocol allows quantification of the deformability via stress exponent, activation volume and activation enthalpy giving additional quantification. In conjunction with TEM images, the mechanical data gives insight into the underlying mechanisms.

BaTiO 3 single crystals were deformed in compression along the$$\\langle 110\\rangle$$⟨ 110 ⟩ crystal axis to study the plastic deformability and dislocation structures at high temperatures under different loading conditions. The yield strength is determined from stress–strain curves under strain rate control, load control, strain rate cycling tests, and under step-wise loading conditions to elucidate the impact of measurement approach in yield strength behavior. A comparison between the chosen methods based on stress-dependent strain rate plots indicates that load control measurements are a suitable alternative to the commonly used strain rate-control experiments in metals. This allows avoiding overloading and providing an estimate of the overall achievable strain rates in a ceramic. Activation energies and activation volumes in the temperature range of 1100–1170 °C indicate a similar mechanical deformation behavior to SrTiO 3 . Graphical abstract

Piezoelectric single crystals based on the perovskite ferroelectric system (K,Na)NbO 3 have been widely investigated over the past 20 years due to large piezoelectric coefficients, high transition temperatures, low density, and the nontoxic chemical composition. Various crystal growth methods were examined, including high-temperature solution growth, solid-state crystal growth, Bridgman–Stockbarger method, and the floating zone method. Increased understanding of the crystal growth process and post-growth treatments resulted in improved crystal quality and larger sizes. Recently, crystals with high piezoelectric and electromechanical coupling coefficients exceeding 1000 pC/N and 0.90, respectively, were reported. Moreover, their large potential for high-frequency ultrasonic medical imaging was demonstrated. This work provides a review of the development of piezoelectric (K,Na)NbO 3 -based single crystals, including their growth, defect chemistry, domain structures, electromechanical properties, and applications. Approaches for reducing growth defects, controlling point defects, and domain engineering are discussed. The remaining open issues are presented and an outlook on the future is provided.