Explore the vast range of titles available.

FASER is searching for light, weakly-interacting particles at the Large Hadron Collider. The first search for Axion-like particles (ALPs) decaying to a photon pair using data collected in 2022 and 2023 was performed and successfully excluded regions not previously ruled out. To further reduce neutrino background, a new preshower detector will be installed by the end of 2024. The detector is based on a monolithic active pixel sensor in 130 nm SiGe BiCMOS, which will allow resolving the photon pairs interacting in the preshower detector. The final ASICs have been produced in May 2024 and are currently being validated.

We present a momentum measurement method based on multiple Coulomb scattering (MCS) in the FASERν emulsion detector. The measurement of charged-particle momenta is essential for studying neutrino interactions in the TeV energy range at the FASER experiment. This method exploits the sub-micron spatial resolution and long tracking length of the FASERν detector, enabling momentum determination from a few GeV up to a few TeV. The performance was evaluated using Geant4-based Monte Carlo simulations and validated with muon test beam data in the momentum range 100-300 GeV. As a first probe of the method for higher momentum muons, background muons recorded by the FASERν detector were examined, showing reconstructed momenta consistent with expectations from their angular spread.

The Forward Physics Facility (FPF) is a proposed extension of the HL-LHC program designed to exploit the unique scientific opportunities offered by the intense flux of high energy neutrinos, and possibly new particles, in the far-forward direction. Located in a well-shielded cavern 627 m downstream of one of the LHC interaction points, the facility will support a broad and ambitious physics program that significantly expands the discovery potential of the HL-LHC. Equipped with four complementary detectors -- FLArE, FASER\\(\\)2, FASER2, and FORMOSA -- the FPF will enable breakthrough measurements that will advance our understanding of neutrino physics, quantum chromodynamics, and astroparticle physics, and will search for dark matter and other new particles. With this Letter of Intent, we propose the construction of the FPF cavern and the construction, integration, and installation of its experiments. We summarize the physics case, the facility design, the layout and components of the detectors, as well as the envisioned collaboration structure, cost estimate, and implementation timeline.

This letter presents the measurement of the energy-dependent neutrino-nucleon cross section in tungsten and the differential flux of muon neutrinos and anti-neutrinos. The analysis is performed using proton-proton collision data at a center-of-mass energy of \\(13.6 \\, TeV\\) and corresponding to an integrated luminosity of \\((65.6 1.4) \\, fb^-1\\). Using the active electronic components of the FASER detector, \\(338.1 21.0\\) charged current muon neutrino interaction events are identified, with backgrounds from other processes subtracted. We unfold the neutrino events into a fiducial volume corresponding to the sensitive regions of the FASER detector and interpret the results in two ways: We use the expected neutrino flux to measure the cross section, and we use the predicted cross section to measure the neutrino flux. Both results are presented in six bins of neutrino energy, achieving the first differential measurement in the TeV range. The observed distributions align with Standard Model predictions. Using this differential data, we extract the contributions of neutrinos from pion and kaon decays.

The Forward Physics Facility (FPF) at the High-Luminosity LHC (HL-LHC) will enable high-statistics measurements of TeV-scale neutrinos, but the intense flux of forward muons poses a major challenge for neutrino detectors in the far-forward region. We investigate the suppression of background muons using sweeper magnets with a simulation framework combining SIBYLL event generation, BDSIM beam transport, Geant4 particle tracking, and realistic magnetic field maps. Starting from a muon flux of \\(3.810^3~cm^-2\\) per \\(fb^-1\\) without magnets, a magnet in the LHC tunnel alone achieves the target level of \\(210^3~cm^-2\\) per \\(fb^-1\\). Additional magnets at the TI18 tunnel and FPF entrance further reduce the flux to \\(1.510^3~cm^-2\\) per \\(fb^-1\\) in the optimized configuration. These results demonstrate that a properly optimized multi-stage sweeper magnet system can significantly reduce the forward muon background, while also highlighting the importance of realistic transport simulations and geometrical constraints in achieving further suppression.

We report the first direct observation of neutrino interactions at a particle collider experiment. Neutrino candidate events are identified in a 13.6 TeV center-of-mass energy \\(pp\\) collision data set of 35.4 fb\\(^-1\\) using the active electronic components of the FASER detector at the Large Hadron Collider. The candidates are required to have a track propagating through the entire length of the FASER detector and be consistent with a muon neutrino charged-current interaction. We infer \\(153^+12_-13\\) neutrino interactions with a significance of 16 standard deviations above the background-only hypothesis. These events are consistent with the characteristics expected from neutrino interactions in terms of secondary particle production and spatial distribution, and they imply the observation of both neutrinos and anti-neutrinos with an incident neutrino energy of significantly above 200 GeV.

FASER, the ForwArd Search ExpeRiment, is an experiment dedicated to searching for light, extremely weakly-interacting particles at CERN's Large Hadron Collider (LHC). Such particles may be produced in the very forward direction of the LHC's high-energy collisions and then decay to visible particles inside the FASER detector, which is placed 480 m downstream of the ATLAS interaction point, aligned with the beam collisions axis. FASER also includes a sub-detector, FASER\\(\\), designed to detect neutrinos produced in the LHC collisions and to study their properties. In this paper, each component of the FASER detector is described in detail, as well as the installation of the experiment system and its commissioning using cosmic-rays collected in September 2021 and during the LHC pilot beam test carried out in October 2021. FASER will start taking LHC collision data in 2022, and will run throughout LHC Run 3.

We present methods for electromagnetic shower reconstruction and identification in the FASERnu emulsion detector using 100 GeV and 200 GeV electron test-beam data from the CERN SPS H4 beamline. The reconstruction employs a clustering-based algorithm without energy-dependent tuning to determine shower axes. A multi-level identification chain comprising track pre-selection, a cut-based selection, and a BDT classifier achieves combined background rejection rates of 99.99% (100 GeV) and 99.94% (200 GeV). The method reaches total reconstruction and identification efficiencies of 58.9% (100 GeV) and 70.8% (200 GeV) evaluated from simulated samples. Energy reconstruction using the total number of reconstructed segments as the calorimetric estimator yields relative biases of +0.6% (100 GeV) and -0.8% (200 GeV), with resolutions of 25.4% and 22.6%, respectively. Systematic uncertainties on the energy reconstruction are dominated by variations in emulsion film detection efficiency, contributing (+10.9%/-8.2%) at 100 GeV and (+10.3%/-6.9%) at 200 GeV. The methodology provides a validated framework for electron neutrino identification with the FASERnu detector at the LHC.

Time-of-flight measurement is an important advancement in PET scanners to improve image reconstruction with a lower delivered radiation dose. This article describes the monolithic ASIC for the TT-PET project, a novel idea for a high-precision PET scanner for small animals. The chip uses a SiGe Bi-CMOS process for timing measurements, integrating a fully-depleted pixel matrix with a low-power BJT-based front-end per channel, integrated on the same 100 \\( m\\) thick die. The target timing resolution is 30 ps RMS for electrons from the conversion of 511 keV photons. A novel synchronization scheme using a patent-pending TDC is used to allow the synchronization of 1.6 million channels across almost 2000 different chips at picosecond-level. A full-featured demonstrator chip with a 3x10 matrix of 500x500 \\( m^2\\) pixels was produced to validate each block. Its design and experimental results are presented here.

We present a momentum measurement method based on multiple Coulomb scattering (MCS) in the FASER\\(\\) emulsion detector. The measurement of charged-particle momenta is essential for studying neutrino interactions in the TeV energy range at the FASER experiment. This method exploits the sub-micron spatial resolution and long tracking length of the FASER\\(\\) detector, enabling momentum determination from a few GeV up to a few TeV. The performance was evaluated using Geant4-based Monte Carlo simulations and validated with muon test beam data in the momentum range 100-300 GeV. As a first probe of the method for higher momentum muons, background muons recorded by the FASER\\(\\) detector were examined, showing reconstructed momenta consistent with expectations from their angular spread.