Explore the vast range of titles available.

This article examines the mediation effect of brand identification and the moderating effect of service quality (SQ) on the effects of corporate social responsibility (CSR) association on service brand performance. A survey of customers of mobile telecommunications services was conducted. The study finds, first, that both CSR and SQ have direct effects on brand identification and customer satisfaction and indirect effects on customer satisfaction (via brand identification) and on service brand loyalty (via customer satisfaction and via \"brand identification/customer satisfaction\"). Second, SQ enhances the effect of CSR on brand identification. This study contributes to the literature by incorporating three perspectives of service brand performance — CSR association, SQ, and brand identification - into one general framework that stresses (a) the mediating role of brand identification in predicting customer satisfaction and service brand loyalty; and (b) the interactive effect of CSR and SQ in predicting brand identification.

Liver fibrosis plays an important role in the progression of liver disease, but there is a severe shortage of direct and efficacious pharmaceutical clinical interventions. Literature research indicates that aspartic acid exhibits hepatoprotective properties. In this paper, 32 target compounds were designed and synthesized utilizing aspartic acid as the lead compound, of which 22 were new compounds not reported in the literature. These compounds were screened for their inhibitory effects on the COL1A1 promoter to assess in vitro anti-liver fibrosis activity and summarized structure–activity relationships. Four compounds exhibited superior potency with inhibition rates ranging from 66.72% to 97.44%, substantially higher than EGCG (36.46 ± 4.64%) and L-Asp (11.33 ± 0.35%). In an LPS-induced inflammation model of LX-2 cells, both 41 and 8a could inhibit the activation of LX-2 cells, reducing the expression of COL1A1, fibronectin, and α-SMA. Upon further investigation, 41 and 8a ameliorated liver fibrosis by inhibiting the IKKβ-NF-κB signaling pathway to alleviate inflammatory response. Overall, the study evaluated the anti-liver fibrosis effects of aspartic acid derivatives, identified the potency of 41, and conducted a preliminary exploration of mechanisms, laying the foundation for the discovery of novel anti-liver fibrosis agents.

This study addresses the issues of prolonged testing cycles and high costs associated with traditional sprayers. Using Computational Fluid Dynamics method, a simulation model of the gas-liquid coupling flow field for multi-duct sprayer was established, and the effects of operational parameters, the air outlet opening angle, interval, and air velocity on droplet deposition and atomization characteristics were systematically investigated. A multi-factor simulation test was conducted by constructing a CFD simulation model, performing multi-polyhedron meshing, and applying the RNG k - ϵ turbulence model along with the Discrete Phase Model. The results demonstrate that as the flow rate increases from 0.03 kg/s to 0.06 kg/s, the mean thickness of the liquid film and the uniformity index of its distribution both increased, from 197.3 μm and 0.7521 to 340.71 μm and 0.8465 respectively. Medium spray angles and small inner diameter nozzles optimize the uniformity of liquid film distribution, indirectly revealing the effects of each parameter on droplet deposition and its distribution uniformity. When the air outlet opening angle increases from 70° to 80° and then to 90°, the effective working height of the airflow field increases by 0.2 m and 0.1 m, respectively. However, increasing the interval leads to a decrease in the uniformity of the end velocity. The droplets undergo two atomization events within the airflow field. Following the first atomization, the particle size increases due to collisions and merging. The secondary atomization, occurring at a distance of 1.2 m from the air outlet, reduces the particle size and enhances deposition efficiency. Furthermore, as the initial air velocity decreases, the particle size of the droplets within the airflow field tends to increase. The reliability of the CFD simulation model developed in this study were validated through a droplet particle size measurement test. The test results demonstrated that the trend of the measurement values aligned with the simulation values, with the relative error ranging from 11.4% to 15.3%. This research reveals the gas-liquid coupling mechanism within the multi-duct spray flow field, providing a theoretical foundation for the further optimization and modification of this sprayer, thereby significantly reducing costs and improving efficiency.

Electrospun (e-spun) nanofiber materials have emerged as a prominent research focus owing to their extensive and promising potential applications across biomedical, energy, and environmental domains. Polyacrylonitrile (PAN) is a commonly used polymer for electrospinning (e-spinning). Due to insufficient hydrophilic properties of nitrile groups of PAN, its e-spun nonwoven membranes had low water absorption and moisture absorption, which limited application in medical and health fields. In this study, it was investigated that the hydrophilic modification of e-spun PAN nanofiber membrane (NFM) was conducted via Ritter reaction to convert nitrile groups into hydrophilic amide ones, thereby improving the hydrophilicity of PAN NFMs. The surface morphologies and structure of the modified e-spun fibers were characterized and verified by SEM, FTIR and XPS. After 60-90 min of Ritter reaction, the fiber diameter of the PAN NFM became thicker, transforming from a hydrophobic membrane to a hydrophilic one, and the water contact angle decreased from 124.2 to 40.7°. The amidated PAN obtained membrane was post-treatment with sodium hypochlorite to make some amide groups change to N-halamine, which took the PAN NFM antibacterial activity or bacteriostasis. This work suggested a strategy that the espun PAN NFMs modified would have a promising application in medical dressings, air filtration, etc.

Neo-actinomycins A and B (1 and 2), two new natural actinomycins featuring an unprecedented tetracyclic 5 H -oxazolo[4,5- b ]phenoxazine chromophore, were isolated from the marine-derived actinomycete Streptomyces sp. IMB094. Their structures were elucidated by spectroscopic analyses. The presence of this ring system was proposed to originate from a condensation between actinomycin D (3) with α-ketoglutarate and pyruvate, respectively. Compound 1 showed potent cytotoxic activities against human cancer HCT116 and A549 cell lines in the nanomolar range (IC 50 : 38.7 and 65.8 nM, respectively) and moderate antibacterial activities against methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococci (VRE) strains.

Twenty 9O-substituted palmatine derivatives were prepared and tested for their biological effect against collagen α1 (I) (COL1A1) promotor in human hepatic stellate LX-2 cells. The structure−activity relationship (SAR) indicated that the introduction of a benzyl motif on the 9O atom was favorable for activity. Among them, compound 6c provided the highest inhibitory effect against COL1A1 with an IC50 value of 3.98 μM, and it also dose-dependently inhibited the expression of fibrogenic COL1A1, α-soomth muscle actin (α-SMA), matrix metalloprotein 2 (MMP2) in both mRNA and protein levels, indicating extensive inhibitory activity against fibrogenesis. A further primary mechanism study indicated that it might repress the hepatic fibrogenesis via inhibiting both canonical transforming growth factor-beta 1 (TGF-β1)/Smads and non-canonical janus-activated kinase 1 (JAK1)/singal transducer and activator of transcription 3 (STAT3) signaling pathways. Additionally, 6c owned a high safety profile with the LD50 value of over 1000 mg·kg−1 in mice. These results identified palmatine derivatives as a novel class of anti-fibrogenic agents, and provided powerful information for further structure optimization.

Twenty-seven novel 12N-substituted aloperine derivatives were synthesized and investigated for their inhibitory effects on collagen α1 (I) (COL1A1) promotor in human hepatic stellate LX-2 cells, taking aloperine (1) as the hit. A structure-activity relationship (SAR) study disclosed that the introduction of suitable substituents on the 12N atom might enhance the activity. Compound 4p exhibited a good promise on down-regulating COL1A1 expression with the IC50 value of 16.5 μM. Its inhibitory activity against COL1A1 was further confirmed on both mRNA and protein levels. Meanwhile, it effectively inhibited the expression of other fibrogenic proteins, such as transforming growth factor β1 (TGF-β1) and smooth muscle actin (α-SMA). It also exhibited good in vivo safety profile with the oral LD50 value of 400 mg kg−1 in mice. The results initiated the anti-liver fibrogenic study of aloperine derivatives, and the key compound 4p was selected as a novel lead for further investigation against liver fibrogenesis.

Along with the rapid development of society, freshwater shortages have become a global concern. Although existing desalination technologies have alleviated this pressure to some extent, their long-term environmental impact and energy consumption are still questionable. Therefore, it is necessary to find a new effective way for seawater desalination with cleaner energy. Solar-driven interfacial water evaporation technology has the advantages of environmental protection, energy saving, high evaporation efficiency, low cost, and strong sustainability, and is considered one of the most effective technologies to relieve water resource stress. This review summarized the recent advances in carbon-based interfacial photothermal converters focused on the preparation methods of 2D and 3D photothermal absorbers, the potential ways to enhance the efficiency of photothermal conversion. Finally, this paper proposed the challenges and future trends of interfacial photothermal converters.

Polylactic acid (PLA) is a biodegradable polymer made from natural sources, and its electrospinning (e-spinning) nanofiber membrane doped with antibacterial ingredients is widely used in the field of medical dressings. In this research, 9 wt% of rosmarinic acid (RosA) and 0.04 wt% of graphite oxide (GO) with synergistic antibacterial activity were introduced into the e-spinning PLA precursor solution, and the obtained PLA nanofiber membrane showed good antibacterial properties and wound healing effects. At the same time, a nonionic amphiphilic polymer, polyethylene glycol (PEG), was also introduced into this system to improve the hydrophilicity of the e-spinning membrane for wound healing application. The morphological characterization showed the RosA/GO and PEG did not affect the e-spinning of PLA. The tests of mechanical performance and wettability demonstrated that PEG and RosA/GO incorporated in PLA have migrated easily to the surface of the fiber. The e-spun PLA/PEG/RosA/GO membrane showed good antibacterial activity and promoted initial wound healing quickly, which would be a promising application in wound dressing.

Bicomponent composite fibers, due to their unique versatility, have attracted great attention in many fields, such as filtration, energy, and bioengineering. Herein, we efficiently fabricated polyvinylidene fluoride/polyimide (PVDF/PI) side-by-side bicomponent nanofibers based on electrospinning, which resulted in the synergism between PVDF and PI, and eventually obtained the effect of 1 + 1 > 2. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) were used to characterize the morphology and chemical structure of nanofibers, indicating that a large number of side-by-side nanofibers were successfully prepared. Further, the thermal stability, mechanical strength, and filtration properties of PVDF/PI were carefully investigated. The results revealed that the bicomponent nanofibers possessed both good mechanical strength and remarkable thermal stability. Moreover, the mechanical properties of PVDF/ PI were strengthened by more than twice after the heat treatment (7.28 MPa at 25 °C, 15.49 MPa at 230 °C). Simultaneously, after the heat treatment at 230 °C for 30 min, the filtration efficiency of PVDF/PI membrane was maintained at about 95.45 ± 1.09%, and the pressure drop was relatively low. Therefore, the prepared PVDF/PI side-by-side bicomponent nanofibers have a favorable prospect of application in the field of medium- and high-temperature filtration, which further expands the application range of electrospun fiber membranes.