Explore the vast range of titles available.

The global demand for dietary proteins and protein-derived products are projected to dramatically increase which cannot be met using traditional protein sources. Seafood processing by-products (SPBs) and microalgae are promising resources that can fill the demand gap for proteins and protein derivatives. Globally, 32 million tonnes of SPBs are estimated to be produced annually which represents an inexpensive resource for protein recovery while technical advantages in microalgal biomass production would yield secure protein supplies with minimal competition for arable land and freshwater resources. Moreover, these biomaterials are a rich source of proteins with high nutritional quality while protein hydrolysates and biopeptides derived from these marine proteins possess several useful bioactivities for commercial applications in multiple industries. Efficient utilisation of these marine biomaterials for protein recovery would not only supplement global demand and save natural bioresources but would also successfully address the financial and environmental burdens of biowaste, paving the way for greener production and a circular economy. This comprehensive review analyses the potential of using SPBs and microalgae for protein recovery and production critically assessing the feasibility of current and emerging technologies used for the process development. Nutritional quality, functionalities, and bioactivities of the extracted proteins and derived products together with their potential applications for commercial product development are also systematically summarised and discussed.

Cancer is a primary cause of human fatality and conventional cancer therapies, e.g., chemotherapy, are often associated with adverse side-effects, tumor drug-resistance, and recurrence. Molecularly targeted therapy, composed of small-molecule inhibitors and immunotherapy (e.g., monoclonal antibody and cancer vaccines), is a less harmful alternative being more effective against cancer cells whilst preserving healthy tissues. Drug-resistance, however, caused by negative regulation of cell death signaling pathways, is still a challenge. Circumvention of negative regulators of cell death pathways or development of predictive and response biomarkers is, therefore, quintessential. This review critically discusses the current state of knowledge on targeting negative regulators of cell death signaling pathways including apoptosis, ferroptosis, necroptosis, autophagy, and anoikis and evaluates the recent advances in clinical and preclinical research on biomarkers of negative regulators. It aims to provide a comprehensive platform for designing efficacious polytherapies including novel agents for restoring cell death signaling pathways or targeting alternative resistance pathways to improve the chances for antitumor responses. Overall, it is concluded that nonapoptotic cell death pathways are a potential research arena for drug discovery, development of novel biomarkers and targeted therapies.

Microalgae are ideal candidates for bioremediation and biotechnological applications. However, salinity and nutrient resource availability vary seasonally and between cultivation sites, potentially impacting on biomass productivity. The aim of this study was to screen pollutant-tolerant freshwater microalgae (Desmodesmus armatus, Mesotaenium sp., Scenedesmus quadricauda and Tetraedron sp.), isolated from Tarong power station ash-dam water, for their tolerance to cultivation at a range of salinities. To determine if biochemical composition could be manipulated, the effects of 4-day nutrient limitation were also determined. Microalgae were cultured at 2, 8, 11 and 18 ppt salinity, and nutrient uptake was monitored daily. Growth, total lipid, fatty acid (FA), and amino acid contents were quantified in biomass harvested while nutrient-replete and, after 4 days, nutrient-deplete. D. armatus showed the highest salinity tolerance actively growing in up to 18 ppt while Mesotaenium sp. was the least halotolerant with decreasing growth rates from 11 ppt. However, Mesotaenium sp. at 2 and 8 ppt had the highest biomass productivity and nutrient requirements of the four species, making it ideal for nutrient remediation of eutrophic freshwater effluents. Salinity and nutrient status had minimal influence on total lipid and FA contents in D. armatus and Mesotaenium sp., while nutrient depletion induced an increase of total lipid and FAs in S. quadricauda and Tetraedron sp., which was further increased with increasing salinity. As none of the growth conditions affected amino acid profiles of the species, these findings provide a basis for species selection based on site-specific salinity conditions and nutrient resource availability.

Microalgae are ideal candidates for waste-gas and -water remediation. However, salinity often varies between different sites. A cosmopolitan microalga with large salinity tolerance and consistent biochemical profiles would be ideal for standardised cultivation across various remediation sites. The aims of this study were to determine the effects of salinity on Picochlorum atomus growth, biomass productivity, nutrient uptake and biochemical profiles. To determine if target end-products could be manipulated, the effects of 4-day nutrient limitation were also determined. Culture salinity had no effect on growth, biomass productivity, phosphate, nitrate and total nitrogen uptake at 2, 8, 18, 28 and 36 ppt. 11 ppt, however, initiated a significantly higher total nitrogen uptake. While salinity had only minor effects on biochemical composition, nutrient depletion was a major driver for changes in biomass quality, leading to significant increases in total lipid, fatty acid and carbohydrate quantities. Fatty acid composition was also significantly affected by nutrient depletion, with an increased proportion of saturated and mono-unsaturated fatty acids. Having established that P. atomus is a euryhaline microalga, the effects of culture salinity on the development of the freshwater cyanobacterial contaminant Pseudanabaena limnetica were determined. Salinity at 28 and 36 ppt significantly inhibited establishment of P. limnetica in P. atomus cultures. In conclusion, P. atomus can be deployed for bioremediation at sites with highly variable salinities without effects on end-product potential. Nutrient status critically affected biochemical profiles--an important consideration for end-product development by microalgal industries. 28 and 36 ppt slow the establishment of the freshwater cyanobacterium P. limnetica, allowing for harvest of low contaminant containing biomass.

Physical and chemical properties of biodiesel are influenced by structural features of the fatty acids, such as chain length, degree of unsaturation and branching of the carbon chain. This study investigated if microalgal fatty acid profiles are suitable for biodiesel characterization and species selection through Preference Ranking Organisation Method for Enrichment Evaluation (PROMETHEE) and Graphical Analysis for Interactive Assistance (GAIA) analysis. Fatty acid methyl ester (FAME) profiles were used to calculate the likely key chemical and physical properties of the biodiesel [cetane number (CN), iodine value (IV), cold filter plugging point, density, kinematic viscosity, higher heating value] of nine microalgal species (this study) and twelve species from the literature, selected for their suitability for cultivation in subtropical climates. An equal-parameter weighted (PROMETHEE-GAIA) ranked Nannochloropsis oculata, Extubocellulus sp. and Biddulphia sp. highest; the only species meeting the EN14214 and ASTM D6751-02 biodiesel standards, except for the double bond limit in the EN14214. Chlorella vulgaris outranked N. oculata when the twelve microalgae were included. Culture growth phase (stationary) and, to a lesser extent, nutrient provision affected CN and IV values of N. oculata due to lower eicosapentaenoic acid (EPA) contents. Application of a polyunsaturated fatty acid (PUFA) weighting to saturation led to a lower ranking of species exceeding the double bond EN14214 thresholds. In summary, CN, IV, C18:3 and double bond limits were the strongest drivers in equal biodiesel parameter-weighted PROMETHEE analysis.

Dinoflagellates are important primary producers, crucial in marine food webs. Toxic strains, however, are the main causative agents of non-bacterial seafood poisoning, a major concern for public health worldwide. Despite their importance, taxonomic uncertainty within many genera of dinoflagellates is still high. The genus Coolia includes potentially harmful species and the diversity within the genus is just starting to become apparent. In the current study, cultures were established from strains of Coolia spp. isolated from the central Great Barrier Reef (GBR). Cultures were identified based on thecal plate morphology and analyses of sequences (18S, ITS and 28S) from the nuclear rRNA operon. We report that the central GBR harbors a high diversity of Coolia species, including two species known to be capable of toxin production (C. tropicalis and C. malayensis), as well as the non-toxic C. canariensis. The strain of C. canariensis isolated from the GBR may in fact be a cryptic species, closely related but nevertheless phylogenetically distinct from the strain on which the holotype of C. canariensis was based. We also found evidence of the occurrence of a cryptic species morphologically very similar to both C. malayensis and C. monotis. The consequences of taxonomic confusion within the genus are discussed. The central GBR region harbors a previously unreported high diversity of Coolia spp., including two species known to potentially produce toxins. The presence of a cryptic species of unknown toxicity highlights the importance of cryptic diversity within dinoflagellates.

Many parasitic Apicomplexa, such as Plasmodium falciparum , contain an unpigmented chloroplast remnant termed the apicoplast, which is a target for malaria treatment. However, no close relative of apicomplexans with a functional photosynthetic plastid has yet been described. Here we describe a newly cultured organism that has ultrastructural features typical for alveolates, is phylogenetically related to apicomplexans, and contains a photosynthetic plastid. The plastid is surrounded by four membranes, is pigmented by chlorophyll a , and uses the codon UGA to encode tryptophan in the psbA gene. This genetic feature has been found only in coccidian apicoplasts and various mitochondria. The UGA-Trp codon and phylogenies of plastid and nuclear ribosomal RNA genes indicate that the organism is the closest known photosynthetic relative to apicomplexan parasites and that its plastid shares an origin with the apicoplasts. The discovery of this organism provides a powerful model with which to study the evolution of parasitism in Apicomplexa. An organelle with history The apicomplexans are protozoan parasites of animals, including the pathogens causing malaria, toxoplasmosis and other human diseases. Most apicomplexans contain an unpigmented chloroplast remnant — the apicoplast — that is essential for the parasite's survival. It is thought that photosynthetic genes were lost during organelle evolution, but no descendant of a 'photosynthetic apicomplexan' with a photosynthetic plastid was known. Now an organism isolated from a stony coral in Sydney Harbour comes close to fitting that bill. The alga lives in association with corals, but can be cultivated as a free-living organism. It is phylogenetically related to Apicomplexa and its chloroplast features a genetic novelty — the presence of photosynthetic genes in combination with the use of the UGA codon to encode tryptophan — the latter being characteristic of apicoplasts. The first apicomplexan, Chromera velia , with a functional photosynthetic plastid has been isolated and characterized, providing insight into early apicomplexan evolution.

Highly nutritional microalgal species are extensively used in aquaculture as live feedstock. Due to difficulties in maintaining microalgae in axenic conditions, they represent a potential pathogen carrier and disease vector in aquaculture ponds. Photodynamic therapy (PDT) via singlet oxygen (1O2) production is a promising sterilization technique in aquaculture. Here, we report on the sensitivity of aquaculture-relevant microalgae towards 1O2 generated by the cationic photosensitizer TMPyP. Possible PDT sterilization protocols of contaminated microalgae cultures were evaluated using the luminescent bacterium Vibrio campbellii ISO7 as a model aquaculture pathogen. Species-specific sensitivity of microalgae to TMPyP-mediated PDT was demonstrated and found to be strongly influenced by the nature and architecture of their respective cell wall. While cytotoxicity was not evident against Nannochloropsis oculata, toxicity of 1O2 was dose-, time- and light activation-dependent against Tisochrysis lutea, Tetraselmis chui, Chaetoceros muelleri and Picochlorum atomus. The 1O2-resilient N. oculata was sterilized when incubated under light in the presence of V. campbellii ISO7 (up to 107 CFU mL−1) and 20 μM TMPyP; hence, TMPyP-based PDT sterilization of N. oculata could be suitable for aquaculture hatcheries. This study also suggests that PDT using cationic porphyrins such as TMPyP holds potential as an algicidal treatment in aquaria and aquaculture systems (but more research using opportunistic and toxic species is needed for confirmation).

Low-level methane emissions from coal mine ventilation air (CMV-CH₄; i.e., 1 % CH₄) can significantly contribute to global climate change, and therefore, treatment is important to reduce impacts. To investigate CMV-CH₄ abatement potential, five different mixed methanotrohic consortia (MMCs) were established from soil/sediment sources, i.e., landfill top cover soil, bio-solid compost, vegetated humus soil, estuarine and marine sediments. Enrichment conditions for MMCs were as follows: nitrate mineral salt (NMS) medium, pH ~ 6.8; 25 °C; 20–25 % CH₄; agitation 200 rpm; and culture period 20 days, in mini-bench-top bioreactors. The enriched cultures were supplemented with extra carbon (methanol 0.5–1.5 %, formate 5–15 mM, and acetate 5–15 mM), nitrogen (nitrate 0.5–1.5 g L⁻¹, ammonium 0.1–0.5 g L⁻¹, or urea: 0.1–0.5 g L⁻¹), and trace elements (copper 1–5 μM, iron 1–5 μM, and zinc 1–5 μM) in different batch experiments to improve low-level CH₄ abatement. Average CH₄ oxidation capacities (MOCs) of MMCs varied between 1.712 ± 0.032 and 1.963 ± 0.057 mg g⁻¹DWbᵢₒₘₐₛₛ h⁻¹. Addition of formate improved the MOCs of MMCs, but the dose-response varied for different MMCs. Acetate, nitrate and copper had no significant effect on MOCs, while addition of methanol, ammonium, urea, iron and zinc impacted negatively. Overall, MMCs enriched from marine sediments and landfill top cover soil showed high MOCs which were largely resilient to nutrient supplementation, suggesting a strong potential for biofilter development for industrial low-level CH₄ abatement, such as those present in CMV.

The global dependence on finite fossil fuel-derived energy is of serious concern given the predicted population increase. Over the past decades, bio-refining of woody biomass has received much attention, but data on food waste refining are sorely lacking, despite annual and global deposition of 1.3 billion tons in landfills. In addition to negative environmental impacts, this represents a squandering of valuable energy, water and nutrient resources. The potential of carbohydrate-rich food waste (CRFW) for biofuel (by Rhodotorulla glutinis fermentation) and biogas production (by calculating theoretical methane yield) was therefore investigated using a novel integrated bio-refinery approach. In this approach, hydrolyzed CRFW from three different conditions was used for Rhodotorulla glutinis cultivation to produce biolipids, whilst residual solids after hydrolysis were characterized for methane recovery potential via anaerobic digestion. Initially, CRFW was hydrolysed using thermal- (Th), chemical- (Ch) and Th-Ch combined hydrolysis (TCh), with the CRFW-leachate serving as a control (Pcon). Excessive foaming led to the loss of TCh cultures, while day-7 biomass yields were similar (3.4–3.6 g dry weight (DW) L−1) for the remaining treatments. Total fatty acid methyl ester (FAME) content of R. glutinis cultivated on CRFW hydrolysates were relatively low (~6.5%) but quality parameters (i.e., cetane number, density, viscosity and higher heating values) of biomass extracted biodiesel complied with ASTM standards. Despite low theoretical RS-derived methane potential, further research under optimised and scaled conditions will reveal the potential of this approach for the bio-refining of CRFW for energy recovery and value-added co-product production.