Explore the vast range of titles available.

Background Open burning of anthropogenic sources can release hazardous emissions and has been associated with increased prevalence of cardiopulmonary health outcomes. Exposure to smoke emitted from burn pits in military bases has been linked with respiratory illness among military and civilian personnel returning from war zones. Although the composition of the materials being burned is well studied, the resulting chemistry and potential toxicity of the emissions are not. Methods Smoke emission condensates from either flaming or smoldering combustion of five different types of burn pit-related waste: cardboard; plywood; plastic; mixture; and mixture/diesel, were obtained from a laboratory-scale furnace coupled to a multistage cryotrap system. The primary emissions and smoke condensates were analyzed for a standardized suite of chemical species, and the condensates were studied for pulmonary toxicity in female CD-1 mice and mutagenic activity in Salmonella (Ames) mutagenicity assay using the frameshift strain TA98 and the base-substitution strain TA100 with and without metabolic activation (S9 from rat liver). Results Most of the particles in the smoke emitted from flaming and smoldering combustion were less than 2.5 µm in diameter. Burning of plastic containing wastes (plastic, mixture, or mixture/diesel) emitted larger amounts of particulate matter (PM) compared to other types of waste. On an equal mass basis, the smoke PM from flaming combustion of plastic containing wastes caused more inflammation and lung injury and was more mutagenic than other samples, and the biological responses were associated with elevated polycyclic aromatic hydrocarbon levels. Conclusions This study suggests that adverse health effects of burn pit smoke exposure vary depending on waste type and combustion temperature; however, burning plastic at high temperature was the most significant contributor to the toxicity outcomes. These findings will provide a better understanding of the complex chemical and combustion temperature factors that determine toxicity of burn pit smoke and its potential health risks at military bases.

The P2Y12 receptor inhibitors clopidogrel and prasugrel are widely used. Clopidogrel and prasugrel have different metabolic pathways, but whether their adverse event (AE) profiles differ significantly is unclear. This study aimed to compare the possible AEs induced by clopidogrel and prasugrel and to assess the rank-order of their AEs submitted to a spontaneous reporting database. Data were extracted from the Japanese Adverse Drug Event Report database (JADER). Reports of AEs associated with clopidogrel and prasugrel were analyzed to calculate the reporting odds ratios (RORs) and 95% confidence intervals (CIs). Based on 5869 reports for clopidogrel (69.6%, men) and 513 reports for prasugrel (74.1%, men), 703 and 135 different AEs were identified, respectively. Bleeding complications including hemorrhage were commonly reported for both clopidogrel and prasugrel. As for AEs related to clopidogrel, unexpected AEs such as interstitial lung disease (227 reports; ROR, 1.77; 95% CI, 1.49-2.10), abnormal hepatic function (137 reports; ROR, 1.27; 95% CI, 1.07-1.51), and hepatocellular injury (96 reports; ROR, 120.0; 95% CI, 94.9-151.8) ranked at relatively high positions based on the number of occurrences, unlike prasugrel. This analysis of the national pharmacovigilance database highlights distinct AE profiles for clopidogrel and prasugrel. Unexpected AEs associated with clopidogrel were identified, providing valuable insights for clinical monitoring and patient safety.

The aim of the study was to determine the association between coronavirus disease 2019 (COVID-19) infection and diabetes management indices in patients with type 2 diabetes mellitus. A single-center, retrospective, observational study of patients with type 2 diabetes mellitus at Kenwakai Hospital (Nagano, Japan) was conducted. Data of 95 patients (mean age, 72 ± 12 years; men, 67.4%) who visited between March 1, 2019 and February 28, 2022 were obtained from the hospital's electronic information system. COVID-19 was diagnosed by a chemiluminescent enzyme immunoassay (CLEIA). There was no association between COVID-19 infection and age, sex, hemodialysis treatment status, or the Charlson Comorbidity Index. After adjustment for possible confounding factors, the incidence of COVID-19 infection was significantly correlated with HbA1c ≥7.0% (odds ratio [OR], 5.51; 95% confidence interval [CI], 1.30-23.26). The results suggest an association between high HbA1c levels and COVID-19 infection in patients with type 2 diabetes mellitus. Appropriate management of diabetes mellitus, focusing on HbA1c levels, may help prevent COVID-19 infection and severe disease after infection.

The potential for future energy crises is a problem the world is currently facing. Many countries are switching from fossil to renewable energy to prevent an energy crisis. One of the most developed renewable energy today is solar energy. Easy installation makes solar energy installation not only on a large scale but also on a home scale. Urban areas will be very suitable for building solar photovoltaic (PV) roofs due to minimal open areas. In installing rooftop solar PV, sound planning is needed to predict the energy potential that can be provided by solar energy on the rooftop of a building. Spatial modeling can be done to determine the energy potential and suitable location for rooftop solar PV installation. In building rooftop solar PV modeling, the level of detail of the building will affect the results of the model. The rooftop's shape and the building's height will affect the amount of solar radiation going into the building. However, the higher the level of detail of the building, the higher the cost and processing time will be. This study will review the differences in modeling the potential of rooftop solar PV using different levels of detail. This research will integrate solar radiation data from remote sensing to determine the energy potential of solar radiation and digital surface model data from photogrammetry to create a level of detail for buildings. Integration of solar radiation data and the level of detail of the building will use hillshade analysis. Hillshade analysis can review the shadow effect on the rooftop of a building which will be directly related to the potential of solar energy on the rooftop of the building. This study determines the energy potential on the rooftop of the building with different levels of detail, namely 0, 1, and actual shape, to determine the difference in energy potential in the three scenarios. Hopefully, this research will determine the best level of detail for modeling rooftop solar PV. The best model that can show high accuracy value but at a lower price. Hopefully, this research can also assist policymakers and the public in planning for rooftop solar PV installations to develop renewable energy.

Background Although functional end-to-end anastomosis (FEEA) using a stapler in the colorectal field has been recognised worldwide, the technique varies by surgeon, and the safety of anastomosis using different techniques is unknown. Methods This multicentre prospective observational cohort study was conducted by the KYCC Study Group in Yokohama, Japan, and included patients who underwent colonic resection at seven centres between April 2020 and March 2022. This study compared the incidence of surgery-related abdominal complications (SAC: anastomotic leakage [AL], anastomotic bleeding, intra-abdominal abscess, enteritis, ileus, surgical site infection, and other abdominal complications) between two different methods of FEEA (one-step [OS] method: simultaneous anastomosis and bowel resection; two-step [TS] method: anastomosis after bowel resection). Complications of Clavien–Dindo classification grade 2 or higher were assessed. Results Among 293 eligible cases, the OS and TS methods were used in 194 (66.2%) and 99 (33.8%) patients, respectively. The baseline characteristics were similar between the groups. The OS method used fewer staplers (three vs. four staplers, p  < 0.00001). There were no significant differences in SAC rate between the OS (19.1%) and the TS (16.2%) groups ( p  = 0.44). The OS group had four cases (2.1%) of AL (two patients; grade 3, two patients; grade 2) while the TS group had one case (1.0%) of grade 2 AL ( p  = 0.67). Multivariate logistic regression analysis showed that male sex (odds ratio [OR] 3.95; p  < 0.00001), an open surgical approach (OR 2.36; p  = 0.03), and longer operative duration (OR,2.79; p  = 0.002) were independent predictors of complications, whereas the OS method was not an independent predictor (OR 1.17; p  = 0.66). Conclusions The OS and the TS technique for stapled colonic anastomosis in a FEEA had a similar postoperative complication rate. Trial registration number UMIN000039902 (registration date 23 March 2020).

Pore‐fluid pressure is a critical parameter that governs geodynamic processes including seismic activities. Its evaluation through geophysical observations provides us insights into these processes. The quantitative evaluation requires a thorough understanding of the influence of pore‐fluid pressure on geophysical parameters, such as seismic velocity and electrical conductivity. To study the influence of pore‐fluid pressure on these parameters, we have built a new apparatus with a pore‐fluid pressure control system, which is capable of simultaneously measuring elastic wave velocity and electrical conductivity. Our new apparatus employs two sets of plastic piston–cylinders for the electrical insulation and pore‐fluid pressure transmission. The pore fluid is electrically isolated from the metal work, and its pressure can be precisely controlled without significant contribution of the friction between the piston and cylinder. Our new apparatus was used for a simultaneous measurement of velocity and conductivity in a brine‐saturated Berea sandstone. Elastic wave velocity and electrical conductivity changed in response to the change in confining and pore‐fluid pressures, showing the usefulness of the new apparatus. In order to study the influence of pore‐fluid pressure on elastic wave velocity and electrical conductivity, we have built a new apparatus with a pore‐fluid pressure control system, which is capable of simultaneously measuring velocity and conductivity. Our new apparatus employs plastic piston‐cylinders for the electrical insulation and pore‐fluid pressure transmission. The pore‐fluid is electrically isolated from the metal work, and its pressure can be precisely controlled without significant contribution of the friction between the piston and cylinder.

Background/aims: The conjunctival epithelial cell line, CCL20.2 (CCL), requires the presence of 10% fetal calf serum (FCS) in the medium to survive. To elucidate the molecular mechanism underlying such cell death, including the death signal for these cells, the activities of several caspases in the CCL were measured, and the effects of caspase inhibitors and serum components on cell death were examined. Methods: CCL was grown in Medium 199 containing 10% FCS, and the medium was changed to Medium 199 with or without 10% FCS, or medium without 10% FCS but containing caspase inhibitors or serum components. After 24 hours’ incubation, the enzyme activities of caspases 1, 3, 8, and 9 in the culture supernatants were measured, and the effects of caspase inhibitors and serum components—for example, growth factors, lactoferrin, retinoic acid, were investigated. Results: DNA fragmentation was induced by serum deprivation, confirming that serum deprivation induces apoptosis in CCL. While the activities of caspases 3 and 8 were found to be increased, those of caspases 1 and 9 were not detected in the apoptotic cells. Z-VAD completely suppressed the caspase 3 activation, and specific inhibitors of caspases 1, 8, and 9 partially suppressed the activation. Serum deprivation induced a decrease in the cellular viability, which, however, partially recovered in the presence of caspase inhibitors, epidermal growth factor and retinoic acid. Conclusion: These results suggest that the apoptosis induced by serum deprivation involves caspases 1, 3, 8, and 9, and is suppressed by caspase inhibitors. EGF and retinoic acid have a key role in the maintenance of the ocular surface.

The spontaneously diabetic Torii (SDT) rat has recently been established as a model of type 2 human diabetes mellitus. Male SDT rats develop severe diabetic ocular complications. This study investigated the nature of the ocular complications in this model and addressed the question of whether the SDT rat is a good model of human proliferative diabetic retinopathy. Male SDT rats aged 50 weeks were studied for a period of 8 months. Under deep anaesthesia, one eye of each animal was enucleated following perfusion with fluorescein dextran and a retinal flat mount was prepared to study vascular structure. The other eye was enucleated and investigated histologically by haematoxylin-eosin and azan staining and by immunohistochemistry using antibodies against vascular endothelium (Griffonia simplicifolia isolectin B4 antibody) and vascular endothelial growth factor (VEGF). From the vascular structure study, 17 of 32 rats (53%) showed proliferative retinopathy without vascular non-perfusion. The histological study revealed traction retinal folds in rats with proliferative retinopathy. Azan staining showed some proliferative matrix in rats with normal retinal structure and those with proliferative retinopathy compared with normoglycaemic controls. Staining with Griffonia simplicifolia isolectin B4 antibody showed no specific vascular changes in any of the rats, while VEGF staining revealed higher immunoreactivity in the retina of rats with normal retinal structure and those with proliferative retinopathy, but only low immunoreactivity in the control animals. There appear to be differences between the SDT rat model of diabetic retinopathy and human proliferative diabetic retinopathy, as the SDT rat develops retinal neovascularisation without retinal ischaemia. This very unique display of ocular neovascularisation may be caused by increased expression of VEGF.

It is thought that protoplanets formed in protoplanetary disks excite the orbital motion of the surrounding planetesimals, and the bow shocks caused by the highly excited planetesimals heat their icy component evaporating into gas. We have performed model calculations to study the evolution of molecular abundances of the evaporated icy component, which suggests sulfur-bearing molecules can be good tracers of icy planetesimal evaporation. Here we report the result of our ALMA observations of sulfur-bearing molecules towards protoplanetary disks. The lines were undetected but the obtained upper limits of the line fluxes and our model calculations give upper limits of the fractional abundances of x(H2S) < 10−11 and x(SO) < 10−10 in the outer disk. These results are consistent with the molecular abundances in comets in our Solar system.

The natural killer gene complex (NKC) on chromosome 6 contains clusters of genes that encode both activation and inhibitory receptors expressed on mouse natural killer (NK) cells. NKC genes, particularly belonging to the Nkrp1 and Ly49 gene families, display haplotype differences between different mouse strains and allelic polymorphisms of individual genes, as previously revealed by conventional analysis in a small number of inbred mouse strains. Herein we used array-based comparative genomic hybridization (aCGH) to efficiently compare the NKC in 21 mouse strains to the reference C57BL/6 strain. By using unsupervised clustering methods, we could sort these variations into the same groups as determined by previous RFLP analyses of Nkrp1 and Ly49 genes. Prospective analyses of aCGH and RFLP data validated these relationships. Moreover, aCGH data predicted monoclonal antibody reactivity with an allospecific determinant on molecules expressed by NK cells. Taken together, these data demonstrate the structural variation in the NKC between mouse strains as well as the usefulness of aCGH in analysis of complex, polymorphic gene clusters.