Explore the vast range of titles available.

Purpose To compare the effect of the lateral meniscus (LM) complete radial tear at different tear sites on the load distribution and transmission functions. Methods A compressive load of 300 N was applied to the intact porcine knees ( n  = 30) at 15°, 30°, 60°, 90°, and 120° of flexion. The LM complete radial tears were created at the middle portion (group M), the posterior portion (group P), or the posterior root (group R) ( n  = 10, each group), and the same loading procedure was followed. Finally, the recorded three-dimensional paths were reproduced on the LM-removed knees. The peak contact pressure (contact area) in the lateral compartment and the calculated in situ force of the LM under the principle of superposition were compared among the four groups (intact, group M, group P, and group R). Results At all the flexion angles, the peak contact pressure (contact area) was significantly higher (lower) after creating the LM complete radial tear as compared to that in the intact state ( p  < 0.01). At 120° of flexion, group R represented the highest peak contact pressure (lowest contact area), followed by group P and group M ( p  < 0.05). The results of the in situ force carried by the LM were similar to those of the tibiofemoral contact mechanics. Conclusion The detrimental effect of the LM complete radial tear on the load distribution and transmission functions was greatest in the posterior root tear, followed by the posterior portion tear and the middle portion tear in the deep-flexed position. Complete radial tars of the meniscus, especially at the posterior root, should be repaired to restore the biomechanical function.

Background: Coracoid transfer is a reliable method for managing anterior shoulder instability in athletes who play contact sports; however, differences between the Bristow and Latarjet procedures are unclear. Purpose: To compare clinical outcomes and rates of bone union and bone resorption of the coracoid process between the open Bristow and open Latarjet procedures in rugby players. Study Design: Cohort study; Level of evidence, 3. Methods: Rugby players who underwent an open Bristow or an open Latarjet procedure were retrospectively reviewed for anterior shoulder instability, and 66 shoulders in the Bristow group and 35 in the Latarjet group were included. Graft union and resorption were evaluated using computed tomography at 3 months to 1 year postoperatively. Patient-reported outcome measures (American Shoulder and Elbow Surgeons score, Rowe score, and satisfaction rate) were obtained at a mean follow-up of 74 months (range, 45-160 months) for Bristow and 64 months (range, 50-76 months) for Latarjet procedures. Recurrence and the rate of return to play (RTP), frequency of pain after RTP, and retirement rate after RTP were also assessed. Results: In 97.1% of the Latarjet procedure cases, bone union of the coracoid was achieved at 3 months postoperatively; however, bone union was achieved in only 72.7% of the Bristow procedure cases at 6 months postoperatively. Bone resorption of the coracoid process occurred in 6.1% of shoulders after the Bristow procedure, whereas 100% of shoulders showed bone resorption after the Latarjet procedure. No statistical differences were found in outcome scores between the 2 procedures. Subluxation and persistent pain after returning to sports were identified at a significantly higher rate in the Latarjet group (5 shoulders [14%] and 9 shoulders [26%], respectively) than in the Bristow group (2 shoulders [3%] and 2 shoulders [3%]) (P = .0471 and P = .001, respectively). Conclusion: The Latarjet procedure had an advantage in the early and high rate of bone union but was at a disadvantage in bone resorption compared with the Bristow procedure. Subluxation and pain after returning to sports were more frequent in patients who underwent the open Latarjet procedure than in those who underwent the open Bristow procedure.

Background: Whether the extent of glenoid bone loss (GBL) affects clinical outcome after coracoid process transfer (CPT) is still unclear. Purpose: To evaluate postoperative outcomes after CPT combined with open Bankart repair in young rugby players in terms of the extent of GBL and between the Bristow and Latarjet techniques. Study Design: Cohort study; Level of evidence, 3. Methods: The authors investigated 101 shoulders in 91 competitive rugby players who underwent CPT combined with open Bankart repair by the Bristow (group B; 66 shoulders) or Latarjet (group L; 35 shoulders) procedure between 2007 and 2017. The extent of GBL was calculated from the en face view of the glenoid on preoperative 3-dimensional computed tomography scans and was used to categorize shoulders into 4 grades (grade 0, 0%; grade 1, >0% and ≤10%; grade 2, >10% and ≤20%; grade 3, >20%). At the minimum 2-year follow-up, the authors analyzed the relationship between GBL or GBL grade and postoperative outcome scores (American Shoulder and Elbow Surgeons score, Rowe score, Western Ontario Shoulder Instability Index, and patient satisfaction), return-to-play (RTP) times, graft failure (insufficient union or translocation), and recurrence. Results: The mean GBL in all shoulders was 10.9% ± 9.2% and was not significantly different between the 2 groups. There were no significant correlations between GBL and any outcome measure in either group. The mean RTP time was significantly shorter in group L versus group B (4.8 ± 1.1 vs 5.8 ± 1.8 months, respectively; P = .002), but it was not associated with GBL. In group B, the rate of graft failure was not significantly higher in shoulders with grade 0 or 1 GBL versus grade 2 or 3 GBL (8 [25.0%] vs 4 [11.8%], respectively; P = .21). In group B, graft failure was confirmed in 12 shoulders (18.2%), compared with 1 shoulder (2.9%) in group L. Postoperative recurrence occurred in significantly fewer shoulders in group B than in group L (2 [3.0%] vs 5 [14.3%], respectively; P = .047). Conclusion: The extent of GBL did not affect outcome scores after CPT, regardless of operative procedure.

Purpose The inside-out meniscal repair is widely performed to preserve the function of meniscus. In this technique, the outer suture is passed through the capsule as well as the outer meniscus, while the inner suture is inserted into the meniscus. The aim of this study was to biomechanically compare the suture stability between meniscus-meniscus and meniscus-capsule suture methods for the longitudinal meniscal tear with inside-out technique. Methods Twenty-seven porcine knees were dissected to maintain the femur-medial capsule/meniscus-tibia complex, and the inner meniscus was cut off along the meniscus circumferential fiber with 3 mm width of the peripheral meniscus preserved. After one needle with a 2-0 polyester suture was inserted into the inner portion of the meniscus, the other needle was inserted through 1) the peripheral meniscus (Group A), 2) capsule just above the meniscus (Group B), and 3) capsule at 10 mm apart from the meniscus-capsule junction (Group C) in the inside-out manner. Then, the suture was manually tied on the capsule. The suture gap at the repair site during 300 times of cyclic loading and the ultimate failure load in the load-to-failure test were measured. The statistical significance of the data between two groups in each combination was considered by Bonferroni correction, following a one-way analysis of variance. Results In the cyclic loading test, the suture gap was 0.68 ± 0.26 mm in Group A, 1.08 ± 0.36 mm in Group B, and 1.94 ± 0.57 mm in Group C with a significant difference. In the load-to-failure test, the ultimate failure load was 59.1 ± 13.6 N in Group A, 60.0 ± 7.9 N in Group B, and 57.4 ± 4.7 N in Group C, and there was no significant difference. Conclusion The stitching region in the inside-out technique for longitudinal meniscal tear affected the stability of the tear site, and stitching the mid-substance region of the meniscus provides good stability in response to cyclic tensile loading. In addition, the stitching region did not affect the ultimate failure load. Clinical relevance In the inside-out meniscal repair, the outer suture should be inserted into the remaining peripheral meniscus or the capsule near the meniscus.

Background: Osteoarthritis that develops after traumatic anterior shoulder instability is known as dislocation arthropathy, but its frequency and characteristics are still unclear. Purpose: To evaluate glenoid osteophytes in shoulders with traumatic anterior instability by using computed tomography (CT) and to elucidate the influence of instability on the progression of dislocation arthropathy in different age groups. Study Design: Cross-sectional study; Level of evidence, 3. Methods: This study involved 214 unoperated patients with unilateral instability who underwent CT of both shoulders. The patients were divided into 2 groups according to age at the time of CT: ≤30 years (younger group; n = 172) and ≥31 years (older group; n = 42). Patient demographics as well as the presence, size, and location of glenoid osteophytes were compared between the 2 groups and also between patients with and without osteophytes. Furthermore, patients with osteophytes in the older group were divided into 2 subgroups according to age at the time of the initial injury: as a teenager (early-onset subgroup; n = 9) or at ≥31 years (late-onset subgroup; n = 14), and the same assessments were conducted. Results: Osteophytes were significantly more frequent on the affected side of the older group compared with the younger group (71.4% vs 13.9%, respectively; P < .001). In the younger group, patients with osteophytes had more multiple-instability events (P = .002) and a longer interval from injury to CT (P < .001) than those without osteophytes. Although there was no difference in osteophyte size between the 2 groups, most osteophytes were located at the anteroinferior part of the glenoid in the younger group, while osteophytes were usually circumferential around the glenoid in the older group. A comparison between the early- and late-onset subgroups in older patients with osteophytes revealed that the osteophytes were more frequently located at the anteroinferior glenoid region in the early-onset subgroup. Conclusion: CT allowed a detailed evaluation of glenoid osteophytes, revealing that osteophytes were not uncommon in younger patients. Instability itself might influence the progression of osteoarthritic changes in younger patients, while aging seems to have a greater effect in older patients.

Purpose Partial meniscectomy can cause osteoarthritic changes in knees, as inner portion as well as peripheral portion of meniscus is important. The hypothesis of this study was that the amount of the inner resection of medial meniscus affected the in situ forces through the meniscus and the tibial varus and external rotation under axial load. Methods Fourteen intact porcine knees were investigated with a six-degree of freedom robotic system and force/moment, and the three-dimensional path of intact knees were recorded by universal force sensor when an axial load of 300-N was applied at four different flexion angles (30°, 60°, 90°, and 120°). The same examination was performed on three phased inner resections (30%, 60%, and 90% width) of the medial meniscus. Finally, all paths were reproduced after total medial meniscectomy, and in situ forces of the medial meniscus were calculated based on the superposition principle. Changes in tibiofemoral varus/valgus and internal/external rotation alignment during an axial load were also calculated. Results In situ forces of the medial meniscus decreased according to the amount of meniscal resection at all flexion angles. The reduction was significant in knees with inner resections of > 60% width at all flexion angles and even of 30% width at a flexion angle of 120° ( p  < .05). Incremental changes in the tibiofemoral varus alignment increased depending on the inner resection width at all flexion angles ( p  < .05). Conclusion The amount of inner resection of the medial meniscus was related to reduction of its in situ forces and increment of the tibial varus rotation under axial load.

Background Ultrasonic (US) devices are used in laparoscopic, dental, and spinal surgeries, while it is difficult to use for the joint under irrigation and perfusion solutions due to lack of power. A new US device is developed with greater voltage improvement and has been implemented in the arthroscopic field. The aim is to compare the characteristics of the US devices with the conventional ones in water. Methods Twenty bone blocks from the porcine femur were settled in a holder in water. A 4.0 mm diameter abrader burr moved 15 mm along the long axis of the bone block in ten blocks for three times. A 4.3 mm wide curette blade powered by ultrasonic vibration was moved in the same manner in the other ten blocks. The gutter shape, including the gutter depth and the bottom angle of the gutter, and the curetted area ratio of the gutter were assessed. Forty bones blocks from the porcine femurs were clamped with a holder in water, while the cortical bone surface must be located on the side. A 5 mm diameter drill excavated the bone along the previously-inserted guide wire to the 15 mm depth for twenty blocks. Next, the US excavation probe of 5x4mm rectangular shape was moved to the same depth in the other twenty blocks. Each ten block was cut in half along the bone tunnel and was assessed the surface roughness at three area, while the cross-sectional area (CSA) of the tunnel were measured and the ratio of the measured CSA was calculated based on an expected CSA in the remaining ten blocks for each device. Results The depth of curettage and bottom angle were significantly smaller with the US device than with the abrader burr at all planes, while the curetted area ratio created by each device was mostly equal to the other. Surface roughness was similar in two evacuating devices except one area. CSA ratio with the US excavation device was significantly smaller than that with the drill. Conclusion US curettage has an advantage to flatly curette bone surfaces, while a bone tunnel can be accurately created with the US device.

Background Coronavirus disease 2019 (COVID‐19) sequelae, also known as long COVID, can present with various symptoms. Among these symptoms, autonomic dysregulation, particularly postural orthostatic tachycardia syndrome (POTS), should be evaluated. However, previous studies on the treatment of POTS complicated by COVID‐19 are lacking. Therefore, this study aimed to investigate the treatment course of long COVID complicated by POTS. Methods The medical records of patients who complained of fatigue and met the criteria for POTS diagnosis were reviewed. We evaluated the treatment days, methods and changes in fatigue score, changes in heart rate on the Schellong test, and social situation at the first and last visits. Results Thirty‐two patients with long COVID complicated by POTS were followed up (16 males; median age: 28 years). The follow‐up period was 159 days, and the interval between COVID‐19 onset and initial hospital attendance was 97 days. Some patients responded to β‐blocker therapy. Many patients had psychiatric symptoms that required psychiatric intervention and selective serotonin reuptake inhibitor prescription. Changes in heart rate, performance status, and employment/education status improved from the first to the last visit. These outcomes were believed to be because of the effects of various treatment interventions and spontaneous improvements. Conclusions Our study suggests that the condition of 94% of patients with POTS complicated by long COVID will improve within 159 days. Therefore, POTS evaluation should be considered when patients with long COVID complain of fatigue, and attention should be paid to psychological symptoms and the social context. Long COVID can present with various symptoms. Among these symptoms, autonomic dysregulation, particularly postural orthostatic tachycardia syndrome should be evaluated. This study aimed to investigate the treatment course of long COVID complicated by POTS.