Catalogue Search | MBRL
Are you sure you want to remove the book from the shelf?
{{itemTitle}}
722
result(s) for
"Howe, Christopher"
Sort by:
Is it realistic to use microbial photosynthesis to produce electricity directly?
It is possible to generate small amounts of electrical power directly from photosynthetic microorganisms-arguably the greenest of green energy. But will it have useful applications, and what are the hurdles if so?
Journal Article
Electricity generation from digitally printed cyanobacteria
Microbial biophotovoltaic cells exploit the ability of cyanobacteria and microalgae to convert light energy into electrical current using water as the source of electrons. Such bioelectrochemical systems have a clear advantage over more conventional microbial fuel cells which require the input of organic carbon for microbial growth. However, innovative approaches are needed to address scale-up issues associated with the fabrication of the inorganic (electrodes) and biological (microbe) parts of the biophotovoltaic device. Here we demonstrate the feasibility of using a simple commercial inkjet printer to fabricate a thin-film paper-based biophotovoltaic cell consisting of a layer of cyanobacterial cells on top of a carbon nanotube conducting surface. We show that these printed cyanobacteria are capable of generating a sustained electrical current both in the dark (as a ‘solar bio-battery’) and in response to light (as a ‘bio-solar-panel’) with potential applications in low-power devices.
Cyanobacteria can be exploited to convert light energy into electrical current, however utilising them efficiently for power generation is a challenge. Here, the authors use a simple commercial inkjet printer to fabricate a thin-film paper-based biophotovoltaic cell capable of driving low-power devices.
Journal Article
Otter and odder
When Otter falls in love with his food source, a fish named Myrtle, he must decide whether to follow the way of the otter or the way of his heart.
Book
Porous translucent electrodes enhance current generation from photosynthetic biofilms
Some photosynthetically active bacteria transfer electrons across their membranes, generating electrical photocurrents in biofilms. Devices harvesting solar energy by this mechanism are currently limited by the charge transfer to the electrode. Here, we report the enhancement of bioelectrochemical photocurrent harvesting using electrodes with porosities on the nanometre and micrometre length scale. For the cyanobacteria
Nostoc punctiforme
and
Synechocystis
sp. PCC6803 on structured indium-tin-oxide electrodes, an increase in current generation by two orders of magnitude is observed compared to a non-porous electrode. In addition, the photo response is substantially faster compared to non-porous anodes. Electrodes with large enough mesopores for the cells to inhabit show only a small advantage over purely nanoporous electrode morphologies, suggesting the prevalence of a redox shuttle mechanism in the electron transfer from the bacteria to the electrode over a direct conduction mechanism. Our results highlight the importance of electrode nanoporosity in the design of electrochemical bio-interfaces.
Some microorganisms are able to generate electrons that can be externally harvested. Here the authors show an increase by two orders of magnitude in the photocurrent when two cyanobacterial strains are grown on nanopourous transparent conducting substrates, compared to traditional solid substrates.
Journal Article
3D-printed hierarchical pillar array electrodes for high-performance semi-artificial photosynthesis
The rewiring of photosynthetic biomachineries to electrodes is a forward-looking semi-artificial route for sustainable bio-electricity and fuel generation. Currently, it is unclear how the electrode and biomaterial interface can be designed to meet the complex requirements for high biophotoelectrochemical performance. Here we developed an aerosol jet printing method for generating hierarchical electrode structures using indium tin oxide nanoparticles. We printed libraries of micropillar array electrodes varying in height and submicrometre surface features, and studied the energy/electron transfer processes across the bio-electrode interfaces. When wired to the cyanobacterium
Synechocystis
sp. PCC 6803, micropillar array electrodes with microbranches exhibited favourable biocatalyst loading, light utilization and electron flux output, ultimately almost doubling the photocurrent of state-of-the-art porous structures of the same height. When the micropillars’ heights were increased to 600 µm, milestone mediated photocurrent densities of 245 µA cm
–2
(the closest thus far to theoretical predictions) and external quantum efficiencies of up to 29% could be reached. This study demonstrates how bio-energy from photosynthesis could be more efficiently harnessed in the future and provide new tools for three-dimensional electrode design.
Wiring photosynthetic biomachineries to electrodes is promising for sustainable bio-electricity and fuel generation, but designing such interfaces is challenging. Aerosol jet printing is now used to generate hierarchical pillar array electrodes using indium tin oxide nanoparticles for high-performance semi-artificial photosynthesis.
Journal Article
Integration of plastids with their hosts: Lessons learned from dinoflagellates
After their endosymbiotic acquisition, plastids become intimately connected with the biology of their host. For example, genes essential for plastid function may be relocated from the genomes of plastids to the host nucleus, and pathways may evolve within the host to support the plastid. In this review, we consider the different degrees of integration observed in dinoflagellates and their associated plastids, which have been acquired through multiple different endosymbiotic events. Most dinoflagellate species possess plastids that contain the pigment peridinin and show extreme reduction and integration with the host biology. In some species, these plastids have been replaced through serial endosymbiosis with plastids derived from a different phylogenetic derivation, of which some have become intimately connected with the biology of the host whereas others have not. We discuss in particular the evolution of the fucoxanthin-containing dinoflagellates, which have adapted pathways retained from the ancestral peridinin plastid symbiosis for transcript processing in their current, serially acquired plastids. Finally, we consider why such a diversity of different degrees of integration between host and plastid is observed in different dinoflagellates and how dinoflagellates may thus inform our broader understanding of plastid evolution and function.
Journal Article
Performance determinants, running energetics and spatiotemporal gait parameters during a treadmill ultramarathon
PurposeThe objective of this study was to investigate the changes in metabolic variables, running energetics and spatiotemporal gait parameters during an 80.5 km treadmill ultramarathon and establish which key predictive variables best determine ultramarathon performance.MethodsTwelve participants (9 male and 3 female, age 34 ± 7 years, and maximal oxygen uptake (V˙O2max) 60.4 ± 5.8 ml·kg−1·min−1) completed an 80.5 km time trial on a motorised treadmill in the fastest possible time. Metabolic variables: oxygen consumption (V˙O2), carbon dioxide production (V˙CO2) and pulmonary ventilation (V˙E) were measured via indirect calorimetry every 16.1 km at a controlled speed of 8 km·h−1 and used to calculate respiratory exchange ratio (RER), the energy cost of running (Cr) and fractional utilisation of V˙O2max (F). Spatiotemporal gait parameters: stride length (SL) and cadence (SPM) were calculated via tri-axial accelerometery.ResultsTrial completion time was 09:00:18 ± 01:14:07 (hh:mm:ss). There were significant increases in V˙O2, Cr, F, V˙E and heart rate (HR) (p < 0.01); a significant decrease in RER (p < 0.01) and no change in SL and SPM (p > 0.05) across the measured timepoints. F and Cr accounted for 61% of the variance in elapsed finish time (Radj2 = 0.607, p < 0.01).ConclusionA treadmill ultramarathon elicits significant changes in metabolic variables, running energetics and spatiotemporal gait parameters. With F and Cr explaining 61% of variance in finish time. Therefore, those able to maintain a higher F, while adopting strategies to minimise an increase in Cr may be best placed to maximise ultramarathon performance.
Journal Article
CyanoGate
Recent advances in synthetic biology research have been underpinned by an exponential increase in available genomic information and a proliferation of advanced DNA assembly tools. The adoption of plasmid vector assembly standards and parts libraries has greatly enhanced the reproducibility of research and the exchange of parts between different labs and biological systems. However, a standardized modular cloning (MoClo) system is not yet available for cyanobacteria, which lag behind other prokaryotes in synthetic biology despite their huge potential regarding biotechnological applications. By building on the assembly library and syntax of the Plant Golden Gate MoClo kit, we have developed a versatile system called CyanoGate that unites cyanobacteria with plant and algal systems. Here, we describe the generation of a suite of parts and acceptor vectors for making (1) marked/unmarked knock-outs or integrations using an integrative acceptor vector, and (2) transient multigene expression and repression systems using known and previously undescribed replicative vectors. We tested and compared the CyanoGate system in the established model cyanobacterium Synechocystis sp. PCC 6803 and the more recently described fast-growing strain Synechococcus elongatus UTEX 2973. The UTEX 2973 fast-growth phenotype was only evident under specific growth conditions; however, UTEX 2973 accumulated high levels of proteins with strong native or synthetic promoters. The system is publicly available and can be readily expanded to accommodate other standardized MoClo parts to accelerate the development of reliable synthetic biology tools for the cyanobacterial community.
Journal Article