Explore the vast range of titles available.

The incidence of oral cavity squamous cell carcinoma (OSCC) is particularly high in South Asia. According to the National Comprehensive Cancer Network, OSCC can arise in several subsites. We investigated survival rates and the clinical and pathological characteristics of OSCC in different anatomical subsites in the Taiwanese population. We retrospectively analyzed data for 3010 patients with OSCC treated at the Changhua Christian Hospital. Subsequently, we compared clinical and pathological features of OSCC in different subsites. Pathological T4 stage OSCCs occurred in the alveolar ridge and retromolar trigone in 56.4% and 43.7% of cases, respectively. More than 25% of patients with tongue OSCC and 23.4% of those with retromolar OSCC had lymph node metastasis. The prognosis was worst for hard palate OSCC (hazard ratio 1.848; p  < 0.001) and alveolar ridge OSCC (hazard ratio 1.220; p  = 0.017). Retromolar OSCC recurred most often and tongue OSCC second most often. The risk for cancer-related mortality was highest for hard palate OSCC, followed by alveolar ridge and retromolar OSCC. We found distinct differences in survival among the different subsites of OSCC. Our findings may also help prompt future investigations of OSCC in different subsites in Taiwanese patients.

The TNM staging system for oral squamous cell carcinoma (OSCC) provides clinicians a dependable foundation for patient prognosis and management decisions, but in clinical practice, treatment outcomes of patients with OSCC are sometimes unsatisfactory. This retrospective study investigated the association between survival and clinicopathological characteristics and histological grades of 2535 patients with OSCC. Additionally, the present study aimed to compare the predictive abilities of histological grades with other common prognostic factors. The enrolled patients were divided into three groups by two experienced pathologists into well-differentiated, moderately differentiated, and poorly differentiated groups, according to the WHO classification. Finally, we designed an observational, retrospective study based on the histological grading of tumors to compare their clinicopathological characteristics and conducted survival analysis among the three groups. Advanced tumor stage was diagnosed in 23.9%, 44.0%, and 55.1% of patients with grades 1-3 OSCC, respectively. By T status, T3 or T4 tumors were found in approximately 22%, 34%, and 40% of patients with grades 1-3 OSCC, respectively. By N status, lymph node metastases were found in 6.1%, 29.3%, and 45.9% of patients with grades 1-3 OSCC, respectively. Thus, significant survival differences were observed based on different OSCC histological grades. Meanwhile, in the multivariate (adjusted) analysis, N1 and N2 stages, extranodal spread, and poor differentiation were associated with a higher recurrence risk than the other common prognostic factors. In conclusion, 5% of patients in our study presented with poorly differentiated OSCC at diagnosis. Furthermore, grade 3 OSCC has worse prognosis and is more aggressive than grades 1 and 2 OSCC. In the future, we should focus on modifying individual therapy for poorly differentiated OSCC to achieve improved outcomes.

The objective of this study was to evaluate the effect of bone–miniscrew contact percentage (BMC%) and bone quality and quantity on orthodontic miniscrew stability and the maximum insertion torque value (ITV). Orthodontic miniscrews of five different dimensions and several bovine iliac bone specimens were used in the evaluation. Miniscrews of each dimension group were inserted into 20 positions in bovine iliac bone specimens. The experiment was divided into three parts: (1) Bone quality and quantity were evaluated using cone-beam computed tomography (CBCT) and microcomputed tomography. (2) The 3D BMC% was calculated. (3) The ITVs during miniscrew insertion were recorded to evaluate the stability of the orthodontic miniscrews. The results indicated that longer and thicker miniscrews enabled higher ITVs. CBCT was used to accurately measure cortical bone thickness (r = 0.939, P  < 0.05) and to predict the bone volume fraction of cancellous bone (r = 0.752, P  < 0.05). BMC% was significantly influenced by miniscrew length. The contribution of cortical bone thickness to the ITV is greater than that of cancellous bone structure, and the contribution of cortical bone thickness to BMC% is greater than that of cancellous bone structure. Finally, the higher is BMC%, the greater is the ITV. This study concludes that use of CBCT may predict the mechanical stability of orthodontic miniscrews.

Mandibular canine distalization plays a key role in orthodontic treatment planning, particularly in cases involving premolar extraction. A three-dimensional symmetric finite element analysis (FEA) model with bilinear periodontal ligament (PDL) properties to evaluate the combined effects of five occlusal conditions—intercuspal position (ICP), incisal clench (INC), right unilateral molar clench (RMOL), right group function (RGF), and no occlusion—and three orthodontic force levels (0.98, 1.47, and 1.96 N) on PDL biomechanics. The effects were assessed by measuring hydrostatic stress as an indicator of capillary perfusion and maximum principal strain as a mechanical signal for tissue deformation and bone remodeling stimulus. According to the FEA results, a moderate force of 1.47 N produced a relatively favorable biomechanical response under nonocclusal conditions. Intercuspal position and incisal clench conditions were associated with elevated stress and strain concentrations in the PDL. The right unilateral molar clench condition preserved load-induced bilateral symmetry, whereas the right group function condition resulted in differential left–right biomechanical responses in the PDL under asymmetric occlusal loading conditions. These findings indicate that occlusal loading is a key mechanical factor influencing the biomechanical environment during orthodontic tooth movement. FEA simulations that consider occlusal loading can provide comparative biomechanical insights that can guide the selection of orthodontic forces and identification of mechanical risks.

Segmental mandibular reconstruction is challenging. This in-vitro study compared the biomechanics of two 3D-printed porous Ti-6Al-4 V implants (Quad-diametral-cross, Hex-vase) versus a solid implant using a dual-material 3D-printed mandibular model and strain gauges. A 100 N static load was applied. Under eccentric loading, the solid implant generated extremely high tensile strain (871.67 µε), while porous designs reduced peak strains. The Hex-vase design transmitted the highest compressive strain (-795.85 µε), 65% greater in magnitude than the solid, suggesting improved mechanical stimulus transfer to peri-implant bone. The QDC design provided a moderate environment, suitable for compromised bone. Porous implants are biomechanically superior, offering customizable solutions to mitigate stress shielding.

There is a distinct male predominance in head and neck cancers. The present study aimed to investigate the clinical and pathological features of male and female patients with oral squamous cell carcinoma (OSCC), and to simultaneously conduct a survival analysis. Patients (n = 2573) were identified between January 2008 and December 2018, and subsequently analyzed for characteristics such as age at squamous cell carcinoma diagnosis, lifestyle factors (smoking habit, betel nut chewing and alcohol consumption), pathological American Joint Committee on Cancer (AJCC) anatomic site, AJCC TNM stage, pathological recurrence factor and interval from first diagnosis to recurrence. A case-matched comparison between female (n = 122) and male (n = 2451) patients was conducted. Significant gender differences were noted in age at diagnosis, anatomic site of the tumor, smoking habit, betel nut chewing and alcohol consumption (p < 0.001). There were no significant gender differences in the other clinical and pathological characteristics and survival conditions. In conclusion, female patients with OSCC were older than male patients with OSCC, and mostly had tumors of the oral tongue. Once patients develop OSCC, there was no difference in survival between men and women in a Taiwanese population.

18 F-fluorodeoxyglucose-positron emission tomography (FDG-PET) is widely used for tumor staging. This study sought to determine the relationship of preoperative primary tumor SUVmax (tSUVmax) with the clinicopathological features of patients with OSCC and to compare the prognostic ability of tSUVmax with that of other recurrence factors. Data of 340 patients with OSCC who were diagnosed, treated, and followed up at the Changhua Christian Hospital were retrospectively analyzed. Only patients with OSCC arising from gingiva, palate, floor of the mouth, and retromolar trigone and those who had received preoperative FDG-PET within 2 weeks before surgery were included. tSUVmax value > 9.2 was the strong predictor of bone invasion (area under the receiver operating characteristic curve, 0.844). tSUVmax value > 7.2 showed a strong association with advanced pathological T stage and recurrence factors and was associated with poor survival; tSUVmax > 7.2 showed stronger predictive power for poor disease-free survival (DFS) than pT stage and the other recurrence factors related to primary tumor. FDG-PET can be a useful supplement to contrast-enhanced computed tomography or contrast-enhanced magnetic resonance imaging for diagnosing bone invasion by OSCC. The tSUVmax value was an independent predictor of DFS in this study.

This study used microcomputed tomography (micro-CT) to evaluate the effects of ovariectomy on the trabecular bone microarchitecture and cortical bone morphology in the femoral neck and mandible of female rats. Twelve female Wister rats were divided into two groups: the control and ovariectomized groups. The rats in the ovariectomized group received ovariectomy at 8 weeks of age; all the rats were sacrificed at 20 weeks of age, and their mandibles and femurs were removed and scanned using micro-CT. Four microstructural trabecular bone parameters were measured for the region below the first mandibular molar and the femoral neck region: bone volume fraction (BV/TV), trabecular thickness (TbTh), trabecular separation (TbSp), and trabecular number (TbN). In addition, four cortical bone parameters were measured for the femoral neck region: total cross-sectional area (TtAr), cortical area (CtAr), cortical bone area fraction (CtAr/TtAr), and cortical thickness (CtTh). The CtTh at the masseteric ridge was used to assess the cortical bone morphology in the mandible. The trabecular bone microarchitecture and cortical bone morphology in the femoral necks and mandibles of the control group were compared with those of the ovariectomized group. Furthermore, Spearman's correlation (rs) was conducted to analyze the correlation between the osteoporosis conditions of the mandible and femoral neck. Regarding the trabecular bone microarchitectural parameters, the BV/TV of the trabecular bone microarchitecture in the femoral necks of the control group (61.199±11.288%, median ± interquartile range) was significantly greater than that of the ovariectomized group (40.329±5.153%). Similarly, the BV/TV of the trabecular bone microarchitecture in the mandibles of the control group (51.704±6.253%) was significantly greater than that of the ovariectomized group (38.486±9.111%). Furthermore, the TbSp of the femoral necks in the ovariectomized group (0.185±0.066 mm) was significantly greater than that in the control group (0.130±0.026mm). Similarly, the TbSp of the mandibles in the ovariectomized group (0.322±0.047mm) was significantly greater than that in the control group (0.285±0.041mm). However, the TbTh and TbN trends for the mandibles and femoral necks were inconsistent between the control and ovariectomized groups. Regarding the cortical bone morphology parameters, the TtAr of the femoral necks in the ovariectomized group was significantly smaller than that in the control group. There was no significant difference in the TtAr, CtAr, or CtTh of the femoral necks between the control and ovariectomized groups, and no significant difference in the CtTh of the mandibles between the control and ovariectomized groups. Moreover, the BV/TV and TbSp of the mandibles were highly correlated with those of the femurs (rs = 0.874 and rs = 0.755 for BV/TV and TbSp, respectively). Nevertheless, the TbTh, TbN, and CtTh of the mandibles were not correlated with those of the femoral necks. After the rats were ovariectomized, osteoporosis of the trabecular bone microarchitecture occurred in their femurs and mandibles; however, ovariectomy did not influence the cortical bone morphology. In addition, the parametric values of the trabecular bone microarchitecture in the femoral necks were highly correlated with those of the trabecular bone microarchitecture in the mandibles.

Clinically, a reconstruction plate can be used for the facial repair of patients with mandibular segmental defects, but it cannot restore their chewing function. The main purpose of this research is to design a new three-dimensionally (3D) printed porous titanium mandibular implant with both facial restoration and oral chewing function reconstruction. Its biomechanical properties were examined using both finite element analysis (FEA) and in vitro experiments. Cone beam computed tomography images of the mandible of a patient with oral cancer were selected as a reference to create 3D computational models of the bone and of the 3D-printed porous implant. The pores of the porous implant were circles or hexagons of 1 or 2 mm in size. A nonporous implant was fabricated as a control model. For the FEA, two chewing modes, namely right unilateral molar clench and right group function, were set as loading conditions. Regarding the boundary condition, the displacement of both condyles was fixed in all directions. For the in vitro experiments, an occlusal force (100 N) was applied to the abutment of the 3D-printed mandibular implants with and without porous designs as the loading condition. The porous mandibular implants withstood higher stress and strain than the nonporous mandibular implant, but all stress values were lower than the yield strength of Ti-6Al-4V (800 MPa). The strain value of the bone surrounding the mandibular implant was affected not only by the shape and size of the pores but also by the chewing mode. According to Frost’s mechanostat theory of bone, higher bone strain under the porous implants might help maintain or improve bone quality and bone strength. The findings of this study serve as a biomechanical reference for the design of 3D-printed titanium mandibular implants and require confirmation through clinical investigations.

Objective This study proposed a new classification method of bone quantity and quality at the dental implant site using cone-beam computed tomography (CBCT) image analysis, classifying cortical and cancellous bones separately and using CBCT for quantitative analysis. Methods Preoperative CBCT images were obtained from 128 implant patients (315 sites). First, measure the crestal cortical bone thickness (in mm) and the cancellous bone density [in grayscale values (GV) and bone mineral density (g/cm 3 )] at the implant sites. The new classification for bone quality at the implant site proposed in this study is a “nine-square division” bone classification system, where the cortical bone thickness is classified into A: > 1.1 mm, B:0.7–1.1 mm, and C: < 0.7 mm, and the cancellous bone density is classified into 1: > 600 GV (= 420 g/cm 3 ), 2:300–600 GV (= 160 g/cm 3 –420 g/cm 3 ), and 3: < 300 GV (= 160 g/cm 3 ). Results The results of the nine bone type proportions based on the new jawbone classification were as follows: A1 (8.57%,27/315), A2 (13.02%), A3 (4.13%), B1 (17.78%), B2 (20.63%), B3 (8.57%) C1 (4.44%), C2 (14.29%), and C3 (8.57%). Conclusions The proposed classification can complement the parts overlooked in previous bone classification methods (bone types A3 and C1). Trial registration The retrospective registration of this study was approved by the Institutional Review Board of China Medical University Hospital, No. CMUH 108-REC2-181.