Explore the vast range of titles available.

The development of high-performance near-infrared organic light-emitting diodes is hindered by strong non-radiative processes as governed by the energy gap law. Here, we show that exciton delocalization, which serves to decouple the exciton band from highly vibrational ladders in the S0 ground state, can bring substantial enhancements in the photoluminescence quantum yield of emitters, bypassing the energy gap law. Experimental proof is provided by the design and synthesis of a series of new Pt(ii) complexes with a delocalization length of 5–9 molecules that emit at 866–960 nm with a photoluminescence quantum yield of 5–12% in solid films. The corresponding near-infrared organic light-emitting diodes emit light with a 930 nm peak wavelength and a high external quantum efficiency up to 2.14% and a radiance of 41.6 W sr−1 m−2. Both theoretical and experimental results confirm the exciton–vibration decoupling strategy, which should be broadly applicable to other well-aligned molecular solids.Pt(ii) complexes allow the fabrication of efficient near-infrared organic light-emitting diodes that operate beyond the 900 nm region.

Research into organic light emitters employing multiple resonance-induced thermally activated delayed fluorescence (MR-TADF) materials is presently attracting a great deal of attention due to the potential for efficient deep-blue emission. However, the origins and mechanisms of successful TADF are unclear, as many MR-TADF materials do not show TADF behaviour in solution, but only as particular pure solids. Here, an investigation into a well-known MR-TADF material, DABNA-1, together with other new MR materials (9H-quinolino[3,2,1-kl]phenothiazin-9-one (QPO) and 9H-quinolino-[3,2,1-kl]-phenothiazin-9-one 5,5-dioxide (QP3O)), yields new insights regarding the origin of TADF. Although a material system may support the concept of MR, inefficiency in both forward and reverse intersystem crossings forbids TADF unless a suitable host material allows an exciplex-like host–emitter interaction that boosts TADF. This boosted-TADF mechanism can be generalized to any fluorescence dye that lacks TADF in the photoluminescence measurement but has a thermally accessible S1–T1 energy gap, opening the way to high-performance organic light-emitting diodes.This study reveals the importance of host–guest interactions for effective multiple-resonance thermally activated delayed fluorescence in organic light emitters.

The lack of structural information impeded the access of efficient luminescence for the exciplex type thermally activated delayed fluorescence (TADF). We report here the pump-probe Step-Scan Fourier transform infrared spectra of exciplex composed of a carbazole-based electron donor (CN-Cz2) and 1,3,5-triazine-based electron acceptor (PO-T2T) codeposited as the solid film that gives intermolecular charge transfer (CT), TADF, and record-high exciplex type cyan organic light emitting diodes (external quantum efficiency: 16%). The transient infrared spectral assignment to the CT state is unambiguous due to its distinction from the local excited state of either the donor or the acceptor chromophore. Importantly, a broad absorption band centered at ~2060 cm −1 was observed and assigned to a polaron-pair absorption. Time-resolved kinetics lead us to conclude that CT excited states relax to a ground-state intermediate with a time constant of ~3 µs, followed by a structural relaxation to the original CN-Cz2:PO-T2T configuration within ~14 µs. The development of exciplex-type hosts for thermally activated delayed fluorescence organic light-emitting diodes is hindered by a lack of structural information for these donor:acceptor blends. Here, the authors report the pump-probe Step-Scan Fourier transform IR spectra for a D:A exciplex host.

The industrialization of quantum dot light-emitting diodes (QLEDs) requires the use of less hazardous cadmium-free quantum dots, among which ZnSe-based blue and InP-based green and red quantum dots have received considerable attention. In comparison, the development of InP-based green QLEDs is lagging behind. Here, we prepare green InP/ZnSe/ZnS quantum dots with a diameter of 8.6 nm. We then modify the InP quantum dot emitting layer by passivation with various alkyl diamines and zinc halides, which decreases electron mobility and enhances hole transport. This, together with optimizing the electron transport layer, leads to green 545 nm InP QLEDs with a maximum quantum efficiency (EQE) of 16.3% and a current efficiency 57.5 cd/A. EQE approaches the theoretical limit of InP quantum dots, with an emission quantum yield of 86%. Developing green-emitting InP quantum dot light-emitting diodes (QLED) is lagging behind their red and green counterparts. Here, green InP quantum dots are prepared and incorporated into a QLED so to promote hole transport and reduce electron mobility, resulting in a maximum quantum efficiency of 16.3 %.

Using a transfer printing technique, we imprint a layer of a designated near-infrared fluorescent dye BTP-eC9 onto a thin layer of Pt(II) complex, both of which are capable of self-assembly. Before integration, the Pt(II) complex layer gives intense deep-red phosphorescence maximized at ~740 nm, while the BTP-eC9 layer shows fluorescence at > 900 nm. Organic light emitting diodes fabricated under the imprinted bilayer architecture harvest most of Pt(II) complex phosphorescence, which undergoes triplet-to-singlet energy transfer to the BTP-eC9 dye, resulting in high-intensity hyperfluorescence at > 900 nm. As a result, devices achieve 925 nm emission with external quantum efficiencies of 2.24% (1.94 ± 0.18%) and maximum radiance of 39.97 W sr −1 m −2 . Comprehensive morphology, spectroscopy and device analyses support the mechanism of interfacial energy transfer, which also is proved successful for BTPV-eC9 dye (1022 nm), making bright and far-reaching the prospective of hyperfluorescent OLEDs in the near-infrared region. The low photoluminescence quantum yield of near-infrared (NIR) emitters has limited their application in organic light-emitting diodes (OLEDs). Here, authors realize NIR OLEDs through interfacial energy transfer from platinum(II) complexes to a non-fullerene acceptor based on a sandwiched structure.

In this study, an interactive science learning app on the topic of plate tectonics was developed for tablets to promote argumentative reasoning. The app guided learners through learning stages that required them to propose arguments, identify relevant evidence, acquire background knowledge, and engage in argumentative reasoning in different scenarios. Visual attention during learning was examined using the Tobii Classes 2.0 eye tracking system and analyzed in relation to reasoning performance. Thirty undergraduates (21 female and 9 male) aged 20 to 23 participated in the study. Argumentative reasoning performance was assessed through responses to prompting questions, while visual attention was measured using fixation-based eye movement measures in areas of interest corresponding to different knowledge representations. Descriptive analyses were conducted to illustrate students' argumentative reasoning performance and visual attention distributions, while correlation and regression analyses were performed to explore associations between visual attention and reasoning performance. The results indicated that students' ability to use evidence improved over time, with attention shifting from textual to graphical information following exposure to supporting information provided by the learning app. Higher visual attention to data-related information was linked to better reasoning performance.

Two 2,7-dicyaonfluorene-based molecules 27-DCN and 27 - tDCN are utilized as acceptors (A) to combine with hexaphenylbenzene-centered donors (D) TATT and DDT-HPB for probing the exciplex formation. The photophysical characteristics reveal that the steric hindered 27 -tDCN not only can increase the distance of D and A, resulting in a hypsochromic emission, but also dilute the concentration of triplet excitons to suppress non-radiative process. The 27 - tDCN -based exciplex-forming blends exhibit better photoluminescence quantum yield (PLQY) as compared to those of 27-DCN-based pairs. In consequence, among these D:A blends, the device employing DDT-HPB: 27 - tDCN blend as the emissiom layer (EML) exhibits the best EQE of 3.0% with electroluminescence (EL) λ max of 542 nm. To further utilize the exciton electrically generated in exciplex-forming system, two D–A–D-configurated fluorescence emitter DTPNT and DTPNBT are doped into the DDT-HPB:27-tDCN blend. The nice spectral overlap ensures fast and efficient Förster energy transfer (FRET) process between the exciplex-forming host and the fluorescent quests. The red device adopting DDT-HPB: 27 - tDCN :10 wt% DTPNT as the EML gives EL λ max of 660 nm and maximum external quantum efficiency (EQE max ) of 5.8%, while EL λ max of 685 nm and EQE of 5.0% for the EML of DDT-HPB: 27 - tDCN :10 wt% DTPNBT. This work manifests a potential strategy to achieve high efficiency red and deep red OLED devices by incorporating the highly fluorescent emitters to extract the excitons generated by the exciplex-forming blend with bulky acceptor for suppressing non-radiative process.

Polycaprolactone (PCL) implants in large animals show great promise for tracheal transplantation. However, the longest survival time achieved to date is only about three weeks. To meet clinical application standards, it is essential to extend the survival time and ensure the complete integration and functionality of the implant. Our study investigates the use of three-dimensional (3D)-printed, biodegradable, PCL-based tracheal grafts for large-scale porcine tracheal transplantation, assessing the feasibility and early structural integrity crucial for long-term survival experiments. A biodegradable PCL tracheal graft was fabricated using a BIOX bioprinter and transplanted into large-scale porcine models. The grafts, measuring 20 × 20 × 1.5 mm, were implanted following a 2 cm circumferential resection of the porcine trachea. The experiment design was traditionally implanted in eight porcines to replace four-ring tracheal segments, only two of which survived more than three months. Data were collected on the graft construction and clinical outcomes. The 3D-printed biosynthetic grafts replicated the native organ with high fidelity. The implantations were successful, without immediate complications. At two weeks, bronchoscopy revealed significant granulation tissue around the anastomosis, which was managed with laser ablation. The presence of neocartilage, neoglands, and partial epithelialization near the anastomosis was verified in the final pathology findings. Our study demonstrates in situ regenerative tissue growth with intact cartilage following transplantation, marked by neotissue formation on the graft’s exterior. The 90-day survival milestone was achieved due to innovative surgical strategies, reinforced with strap muscle attached to the distal trachea. Further improvements in graft design and granulation tissue management are essential to optimize outcomes.

(1) Background: This study investigates the effects of Ursodeoxycholic acid (UDCA) on NF-κB signaling, farnesoid X receptor (FXR) singling, and microRNA-21 in HepG2 cells. (2) Methods: HepG2 cells were treated with lipopolysaccharide (LPS) to simulate hepatic inflammation. The investigation focused on the expression of NF-κB activation, which was analyzed using Western blot, confocal microscopy, and Electrophoretic Mobility-shift Assays (EMSA). Additionally, NF-κB and farnesoid X receptor (FXR) singling expressions of micro-RNA-21, COX-2, TNF-α, IL-6, cyp7A1, and shp were assessed by RT-PCR. (3) Results: UDCA effectively downregulated LPS-induced expressions of NF-κB/65, p65 phosphorylation, and also downregulated FXR activity by Western blot. Confocal microscopy and EMSA results confirmed UDCA’s role in modulating NF-κB signaling. UDCA reduced the expressions of LPS-induced COX-2, TNF-α, and IL-6, which were related to NF-κB signaling. UDCA downregulated LPS-induced cyp7A1 gene expression and upregulated shp gene expression, demonstrating selective gene regulation via FXR. UDCA also significantly decreased micro-RNA 21 levels. (4) Conclusions: This study demonstrates UDCA’s potent anti-inflammatory effects on NF-κB and FXR signaling pathways, and thus its potential to modulate hepatic inflammation and carcinogenesis through interactions with NF-κB and FXR. The decrease in micro-RNA 21 expression further underscores its therapeutic potential.

The emission of light by polyatomic molecules in the spectral region of the second near-infrared (NIR(II)) window is severely hampered by the energy gap law, namely the quenching induced by exciton–vibration coupling. As a result, organic light-emitting diodes (OLEDs) with efficient emission wavelengths of ~1,000 nm and above are rare, despite their potential for phototherapy and bioimaging. In this study we revisit the theory of the energy gap law to quantify the contribution of each coupled vibrational mode to non-radiative transitions. The results lead us to propose two approaches that favour emission: molecular packing to extend exciton delocalization, and deuterium substitution to reduce high-frequency vibrations. We provide an experimental proof of concept by designing and synthesizing a new series of self-assembled Pt(II) complexes that exhibit high-intensity phosphorescence with peak quantum yields of (23 ± 0.3)% at approximately 1,000 nm. The corresponding OLEDs emit at a peak wavelength of 995 nm with a maximum external quantum efficiency of 4.31% and a radiance of 1.55 W sr−1 m−2, marking a substantial contribution to the development of efficient OLEDs in the NIR(II) region.A new series of self-assembled Pt(II) complexes with high emission quantum yields enables OLEDs with a maximum emission wavelength of 995 nm and an external quantum efficiency of 4.3%.