Explore the vast range of titles available.

Depending on their structure and order (individual, films, bundled, buckypapers, etc.), carbon nanotubes (CNTs) demonstrate different values of thermal conductivity, from the level of thermal insulation with the thermal conductivity of 0.1 W/mK to such high values as 6600 W/mK. This review article concentrates on analyzing the articles on thermal conductivity of CNT networks. It describes various measurement methods, such as the 3-ω method, bolometric, steady-state method and their variations, hot-disk method, laser flash analysis, thermoreflectance method and Raman spectroscopy, and summarizes the results obtained using those techniques. The article provides the main factors affecting the value of thermal conductivity, such as CNT density, number of defects in their structure, CNT ordering within arrays, direction of measurement in relation to their length, temperature of measurement and type of CNTs. The practical methods of using CNT networks and the potential directions of future research in that scope were also described.

This review summarizes the up-to-date techniques devised to synthesize carbon nanotubes (CNTs) from liquid or solid precursors of sustainable nature. The possibility to replace petroleum-based feeds for renewable resources such as essential oils or plant shoots is critically examined. The analysis shows that the complex nature of such resources requires the optimization of the reaction conditions to obtain products of desired microstructure and chemical composition. However, appropriate tuning of the process parameters enables the synthesis of even high-purity single-walled CNTs with a spectrum of demonstrated high-performance applications at low cost. The sheer number of successful studies completed on this front so far and described herein validate that the development of techniques for the manufacture of such products of high-added value from common precursors is not only possible but, most importantly, promising.

This perspective article highlights a recent surge of interest in the application of textiles containing carbon nanotube (CNT) sensors for human health monitoring. Modern life puts more and more pressure on humans, which translates into an increased number of various health disorders. Unfortunately, this effect either decreases the quality of life or shortens it prematurely. A possible solution to this problem is to employ sensors to monitor various body functions and indicate an upcoming disease likelihood at its early stage. A broad spectrum of materials is currently under investigation for this purpose, some of which already entered the market. One of the most promising materials in this field are CNTs. They are flexible and of high electrical conductivity, which can be modulated upon several forms of stimulation. The article begins with an illustration of techniques for how wearable sensors can be built from them. Then, their application potential for tracking various health parameters is presented. Finally, the article ends with a summary of this field’s progress and a vision of the key directions to domesticate this concept.

We demonstrate a simple one-step approach to separate (6,5) CNTs from raw material by using the aqueous two-phase extraction method. To reach this goal, stable and inexpensive K 2 CO 3 , Na 2 CO 3 , Li 2 CO 3, and K 3 PO 4 basic salts are used as modulators of the differentiation process. Under the appropriate parameters, near monochiral fractions become available for straightforward harvesting. In parallel, we show that the isolation process is strongly affected not only by pH but by the inherent nature of the introduced chemical species as well. The results of our study also reveal that the commonly used ingredients of the biphasic system make a strong contribution to the course of the separation by having far from neutral pH values themselves.

Partial oxidation of nanocarbon materials is one of the most straightforward methods to improve their compatibility with other materials, which widens its application potential. This work studied how the microstructure and properties of high crystallinity single-walled carbon nanotubes (SWCNTs) can be tailored by applying the modified Hummers method. The influence of temperature (0, 18, 40 °C), reaction time (0 min to 7 h), and the amount of KMnO 4 oxidant was monitored. The results showed that depending on the oxidation conditions, the electronic characteristics of the material could be adjusted. After optimizing the parameters, the SWCNTs were much more conductive (1369 ± 84 S/cm with respect to 283 ± 32 S/cm for the untreated material). At the same time, the films made from them exhibited hydrophilic character of the surface (water contact angle changed from 71° to 27°).

Large-scale sustainable hydrogen production by water electrolysis requires a highly active yet low-cost hydrogen evolution reaction (HER) electrocatalyst. Conductive carbon nanomaterials with high surface areas are promising candidates for this purpose. In this contribution, single-walled carbon nanotubes (SWCNTs) are assembled into free-standing films and directly used as HER electrodes. During the initial 20 h of electrocatalytic performance in galvanostatic conditions, the films undergo activation, which results in a gradual overpotential decrease to the value of 225 mV. Transient physicochemical properties of the films at various activation stages are characterized to reveal the material features responsible for the activity boost. Results indicate that partial oxidation of iron nanoparticles encapsulated in SWCNTs is the major contributor to the activity enhancement. Furthermore, besides high activity, the material, composed of only earth-abundant elements, possesses exceptional performance stability, with no activity loss for 200 h of galvanostatic performance at − 10 mA cm −2 . In conclusion, the work presents the strategy of engineering a highly active HER electrode composed of widely available elements and provides new insights into the origins of electrocatalytic performance of SWCNT-based materials in alkaline HER.

Carbon nanotubes (CNTs) play a unique role in the area of flexible conductors as they have remarkably high electrical conductivity and bend easily without deformation. Consequently, CNTs are commonly deposited on substrates as conductive tracks/coatings. Halogenated solvents are often employed to facilitate the deposition process because they dry rapidly due to their high volatility. In this work, we report that halogenated solvents can dope CNTs considerably. The study showed that the use of dichloromethane, chloroform, or bromoform for the CNT deposition significantly impacts the chemical potential of the material, thereby modifying its charge transport characteristics. As a consequence, up to four-fold improvement in electrical conductivity is noted due to doping.

Carbon nanotubes (CNTs) are materials with exceptional electrical, thermal, mechanical, and optical properties. Ever since it was demonstrated that they also possess interesting thermoelectric properties, they have been considered a promising solution for thermal energy harvesting. In this study, we present a simple method to enhance their performance. For this purpose, thin films obtained from high-quality single-walled CNTs (SWCNTs) were doped with a spectrum of inorganic and organic halide compounds. We studied how incorporating various halide species affects the electrical conductivity, the Seebeck coefficient, and the Power Factor. Since thermoelectric devices operate under non-ambient conditions, we also evaluated these materials' performance at elevated temperatures. Our research shows that appropriate dopant selection can result in almost fivefold improvement to the Power Factor compared to the pristine material. We also demonstrate that the chemical potential of the starting CNT network determines its properties, which is important for deciphering the true impact of chemical and physical functionalization of such ensembles.

Chirality purification of single-walled carbon nanotubes (SWCNTs) is desirable for applications in many fields, but general utility is currently hampered by low throughput. We discovered a method to obtain single-chirality SWCNT enrichment by the aqueous two-phase extraction (ATPE) method in a single step. To achieve appropriate resolution, a biphasic system of non-ionic tri-block copolymer surfactant is varied with an ionic surfactant. A nearly-monochiral fraction of SWCNTs can then be harvested from the top phase. We also found, via high-throughput, near-infrared excitation-emission photoluminescence spectroscopy, that the parameter space of ATPE can be mapped to probe the mechanics of the separation process. Finally, we found that optimized conditions can be used for sorting of SWCNTs wrapped with ssDNA as well. Elimination of the need for surfactant exchange and simplicity of the separation process make the approach promising for high-yield generation of purified single-chirality SWCNT preparations.

This perspective article describes the application opportunities of carbon nanotube (CNT) films for the energy sector. Up to date progress in this regard is illustrated with representative examples of a wide range of energy management and transformation studies employing CNT ensembles. Firstly, this paper features an overview of how such macroscopic networks from nanocarbon can be produced. Then, the capabilities for their application in specific energy-related scenarios are described. Among the highlighted cases are conductive coatings, charge storage devices, thermal interface materials, and actuators. The selected examples demonstrate how electrical, thermal, radiant, and mechanical energy can be converted from one form to another using such formulations based on CNTs. The article is concluded with a future outlook, which anticipates the next steps which the research community will take to bring these concepts closer to implementation.